Google
This is a digital copy of a book that was preserved for generations on library shelves before it was carefully scanned by Google as part of a project
to make the world's books discoverable online.
It has survived long enough for the copyright to expire and the book to enter the public domain. A public domain book is one that was never subject
to copyright or whose legal copyright term has expired. Whether a book is in the public domain may vary country to country. Public domain books
are our gateways to the past, representing a wealth of history, culture and knowledge that's often difficult to discover.
Marks, notations and other maiginalia present in the original volume will appear in this file - a reminder of this book's long journey from the
publisher to a library and finally to you.
Usage guidelines
Google is proud to partner with libraries to digitize public domain materials and make them widely accessible. Public domain books belong to the
public and we are merely their custodians. Nevertheless, this work is expensive, so in order to keep providing tliis resource, we liave taken steps to
prevent abuse by commercial parties, including placing technical restrictions on automated querying.
We also ask that you:
+ Make non-commercial use of the files We designed Google Book Search for use by individuals, and we request that you use these files for
personal, non-commercial purposes.
+ Refrain fivm automated querying Do not send automated queries of any sort to Google's system: If you are conducting research on machine
translation, optical character recognition or other areas where access to a large amount of text is helpful, please contact us. We encourage the
use of public domain materials for these purposes and may be able to help.
+ Maintain attributionTht GoogXt "watermark" you see on each file is essential for in forming people about this project and helping them find
additional materials through Google Book Search. Please do not remove it.
+ Keep it legal Whatever your use, remember that you are responsible for ensuring that what you are doing is legal. Do not assume that just
because we believe a book is in the public domain for users in the United States, that the work is also in the public domain for users in other
countries. Whether a book is still in copyright varies from country to country, and we can't offer guidance on whether any specific use of
any specific book is allowed. Please do not assume that a book's appearance in Google Book Search means it can be used in any manner
anywhere in the world. Copyright infringement liabili^ can be quite severe.
About Google Book Search
Google's mission is to organize the world's information and to make it universally accessible and useful. Google Book Search helps readers
discover the world's books while helping authors and publishers reach new audiences. You can search through the full text of this book on the web
at |http: //books .google .com/I
MECHANISMS
AND
MECHANICAL MOVEMENTS
MECHANISMS
AND
MECHANICAL MOVEMENTS
A TREATISE ON DIFFERENT TYPES
OF MECHANISMS AND VARIOUS
METHODS OF TRANSMITTING, CON-
TROLLING AND MODIFYING MOTION,
TO SECURE CHANGES OF VELOCITY,
DIRECTION, AND DURATION OR TIME
OF ACTIQN
BY
FRANKLIN D. JONES
AssoOAis Edixok or MACHINERY
AUTBOt OV ** TDSMIHO AMD BOUNO/' " PLAMINO AMD MlXXIMOi'
*' Gaoimo Tools amd Methods," Etc.
I^/IiST EDITION
- - *, - ^ - * • • ;
J w rf •> »
■* . ■* •*
^* • • ^•Z *\^ ' -V-
NEW YORK
THE INDUSTRIAL PRESS
London : THE MACHINERY PUBLISHING CO,, Ltd.
I9IP
/
\
I
CdPYRIGBT, X918,
BY
THE INDUSTRIAL PRESS
NEW YORK
• ••• . -.-» ••
• ••
• • •
• -•- • • • ." I '•^^*'
COMPOSITION AND ELSCT&OTYPING BY F. H. GIL80N COMPANY, BOSTON, 0. S. A.
/
PREFACE
This treatise on mechanisms and mechanical movements is
intended for designers of machinery and for all interested in
originating new mechanical devices or in dc^veloping and per-
fecting those now in use. In view of the fact that there is an
almost endless variety of mechanisms, it might seem imprac-
ticable to deal with such a broad subject in a single volume
of this size. As the classes of mechanisms, however, which
differ radically in principle, are few in comparison with those
which simply vary in form, it was considered not only practi-
cable, but very desirable, to present in one volume a variety of
mechanical devices representing different types of mechanisms
and selected especially to illustrate important fimdamental
principles.
The designers of machines or mechanisms in general are
constantly engaged in the solution of problems pertaining to
motion and its transmission. The motion derived from some
source of power must be modified to produce certain effects,
and various changes in regard to velocity, direction, and time
of action may be necessary. Frequently, the same result may
be obtained by forms of mechanisms which differ entirely in
principle and effectiveness, and it is essential to employ an
approved method. The purpose of this treatise is not only to
ezqpiain how various mechanical motions may be produced and
controUed, but to show the relation between the theoretical
and practical sides of the subject. The examples include many
ingenious mechanical combinations and are practical designs
which not only illustrate the principles involved, but indicate
exactly how those principles are applied. An understanding
of these concrete examples will prove much more benefidal
than a study of abstract theories, which only give an inadequate
V
416067
VI PREFACE
conception of their application in the design of mechanisms
of various types.
Many technical graduates and draftsmen understand the
proportioning of parts to safely withstand certain stresses
more thoroughly than they do the use of different combinations
of parts either for transmitting, reversing, or otherwise modify-
ing motion to secure whatever action or effect may be required.
Frequently, the stress involved or the strength of the parts
is of little importance, and the principal problem is one per-
taining to motion, especially in the development of new forms
of mechanisms. While a general knowledge of mechanisms
and their possibilities could be obtained by studying miscel-
laneous designs, this would involve considerable duplication
of effort, because so many mechanical devices which vary as
to form and purpose are identical in principle. The different
forms of mechanisms described in this volmne represent many
distinct types, and they have been classified and arranged so
that various modifications of the same general type may readily
be compared.
The coliunns of Machinery were of valuable assbtance in
supplying information and illustrations regarding various types
of mechanisms, especially of the classes common to the machine-
building and machine-tool fields. Special mention should be
made of the excellent examples of mechanisms obtained from
the contributions of G. W. Armstrong and G. M. Meyncke.
The study of mechanical movements is of especial importance
at the present time, owing to the increasing use of automatic
machines in almost every branch of manufacture, and this treat-
ise is published in the belief that it will be of practical value
to many designers, draftsmen, mechanical engineers, and in-
ventors engaged in originating and planning new developments.
The Author.
New Yokk, January, 1918.
CONTENTS
Chapter I
MOTIONS AND GENERAL METHODS OF TRANSMIS-
SION IN MACHINES
Packs
Classes of Motion — Velocity and Acceleration — Velocity
Ratio — Angular Velocity — Link Mechanisms — Universal
Joint — Straight-line Motions — Toggle Joint — Pantograph
Mechanisms — Transmission by Frictional and Toothed Gear-
ing — Transmission by Rexible Bands, Ropes, and Chains —
Trains of Mechanism — Analyzing Action of Epicyclic Gearing. 1-38
Chapter II
SPEED-CHANGING AND CONTROLLING MECHANISMS
Types of Mechanical Speed-changing Mechanisms — Ar-
rangement of Cone-pulley Drives — Combination of Cone-
pulley and Gearing — Geared Speed-changing Mechanisms —
Frictional Speed-changing Devices — Multiple-disk T)rpe of
Speed-changing Mechanism — Friction Dfak and Epicyclic
Gear Combination — Governors of Centrifugal and Inertia
Types 39-59
Chapter III
CONVERSION OF ROTARY AND RECTILINEAR
MOTIONS
Crank and Connecting-rod — Relative Motions of Crank-
pin and Cross-head — the Eccentric — the Crank and Slotted
Cross-head or Scotch Yoke — Cylinders which Revolve about
a Stationary Crank — Cylinders which Revolve within an Ec-
centric Track — Rack and Gear Combination — Methods of
vu
VlU CONTENTS
PAon
Doubling Stroke — Single- and Double-stroke Toggjle Mecha*
nisms — Press-bed Motions for Flat or Cylinder Presses — the
Napier Motion — Reciprocating Motion from Epicydic Gear-
ing 60-96
Chapter IV
REVERSING MECHANISMS
Intermediate Spur Gears for Reversing Motion — Bevel
Gear Type of Reversing Mechanism — Reversal of Motion
with Friction Disks — Operation of Reversing Clutches —
Controlling Point of Reversal by Special or Auxiliary Mecha-
nism — Planer Reversing Mechanism — Reversal of Motion
through Epicyclic Gearing — Automatic Ratchet Reversing
Mechanism — Automatic Control of Spindle Reversal —
Automatic Variation in Point of Reversal — Reversal of
Motion after Predetermined Niunber of Revolutions 97-123
Chapter V
QUICK-RETURN MOTIONS
Quick-return Motion from Crank and Oscillating Link —
Whitworth Quick-return Motion — Modification of Whit-
worth Motion — Quick-return Motion from Elliptical Gearing
— Eccentric Pinion and Elliptical Gearing for Quick-return
Motion , 124-133
Chapter VI
INTERMITTENT MOVEMENTS
Ratchet Gearing — Ratchet Mechanisms for Releasing
Sprockets — Automatic Disengagement of Ratchet Gearing —
Escapements — Automatic Reduction of Intermittent Move-
ment — Gearing for Uniform and Variable Intermittent
Motion — High-speed Intermittent Gearing of Moving Picture
Projector — die Geneva Type of Intermittent Gearing — In-
termittent Gears for Shafts at Right Angles — Adjustable In-
termittent Motion — Automatic Variation of Intermittent
Motion — Automatic Indexing Mechanism — Action of an
Adding Mechanism 134-183
CONTENTS IZ
Chapter Vn
IRREGULAR MOTIONS
PAon
Plate Cams — Positive Motion Cams — Return Cam for
Follower to Secure Positive Motion — Yoke Type of Cam
Follower — Inverse Cams — Wiper and Involute Cams —
Cylinder or Barrel Cam — Automatic Variation of Cam
Motion — Varying Dwell of Cam Follower — Automatic Varia-
tion of Cam Rise and Drop — Sectional Interchangeable Cams
for Varying Motion — Mechanism for Engaging Cams in a
Group Successively — Obtaining Resultant Motion of Several
Cams — Double-shifting Cam 184-201
Chapter Vni
DIFFERENTIAL MOTIONS
Differential Screw — Chinese Windlass — Differential
Motions from Epicyclic Gearing — Compound Differential
Gears for Varying Speeds — Differential Motion between Re-
volving Screw and Nut — Differential Feeding Mechanism for
Revolving Spindle — Application of Floating Lever Principle
— Controlling Mechanisms for Steam Steering G^us
— Substitute for Floating Lever — Differential Governors for
Water Turbines — Differential Gearing of Automobiles —
Speed Regulation through Differential Gearing — Differential
Action through a Cam-controlled Gear — Differential Mech-
anism of a Gear-cutting Machine — Differential Hoisting
Mechanism — Differential Speed Indicator 202-339
Chapter DC
CLUTCHES AND TRIPPING MECHANISMS
Controlling Motion by Means of Clutches — Positive and
Friction Clutches — Multiple-disk Friction Clutches — Rapid-
acting Multiple-disk Clutch equipped with Brake — Magnetic
and Induction Clutches — Clutches that Automatically Dis-
engage — Automatic Tripping Mechanisms for Stopping a
Machine or some Moving Part — Breakable Pins to Prevent
Overload — Automatic Clutch Control to Prevent Overload —
X CONTENTS
pAon
Pressure of Frictional Gearing varied according to Load —
Automatic Relief Mechanisms for Forging Machines — Auto-
matic Speed-limiting Devices — Electromagnetic Tripping
Devices 230-280
Chapter X
AUTOMATIC FEEDING MECHANISMS
Automatic Feeding Attachments having Inclined Chutes —
Attachment for Automatically Feeding Pinion Staffs — Maga-
zine Attachment for Narrow Bushings — Revolving Magazine
Attachment — Hopper Feeding Mechanism for Screw Blanks
— Simple Arrangement for Feeding Shells with Closed Ends
Foremost — Feeding Bullets with Pointed Ends Foremost —
Feeding Shells Successively and in any Position — Feeding
Shells Successively and Ga^ng the Diameters 281-297
• • « •
MECHANISMS AND
MECHANICAL MOVEMENTS
CHAPTER I
MOTIONS AND GENERAL M ETHOD S OF TRANSMISSION
IN MACHINSS
Machines of various classes are designed to modify energy
and adapt it to useful work. The energy is derived from some
natural source and is transmitted through the members com-
posing the mechanical device to the place where work is to be
performed. The construction of any machine or mechanism
involves, first, a combination of parts which will produce the
necessary motion, and, second, the formation and proportioning
of these parts so that the required amount of energy may be
transmitted. In the design of any machine, then, there are two
distinct branches of work. One branch pertains to motion
and the other to the magnitude of the forces involved and the
mechanical means for transmitting them without breakage or
excessive distortion of the different machine members. Evi-
dently, the means for obtaining the right kind of motion and of
modifying it to suit specific purposes may be studied without
considering the forces which are to act upon the machine parts
or the proportioning of these parts with reference to stresses,
etc. This volume deals principally with various weU-known
mechanical movements and contains illustrated descriptions of
mechanisms which have been applied to many different types
of machinery.
Classes of Motion. — When motion of a machine part does
not vary in direction, it is said to be continuous; when the direc-
tion of motion reverses, it is reciprocating, and when there are
periods of rest, it is intermittent. A body in motion may be* free
• • • • • • •
•
• • • • • * •
• • •
• • • • w* »
. .. ••••*• 'llECHAKlCXt MOVEMENTS
or constrained. The motion is said to be free when the body
may move in any direction in accordance with the forces acting
upon it, whereas the term constrained motion means that the
direction of movement is confined to a restricted path. The
planets in their flight through space are examples of free motion,
the path or orbit of a planet being determined by the resultant
of all the forces acting upon it. The moving parts of every
machine represent examples of constrained motion. For in-
stance, the cross-head of an engine is constrained and caused to
move in a straight path by a guide or guides. Owing to the angu-
lar positions of the connecting-rod, the cross-head is subjected
to thrusts which would cause it to move laterally were it not for
the straight guiding surfaces that are strong enough to resist
the opposing force. A shaft which revolves in fixed bearings is
another simple example of constrained motion. The charac-
teristic feature of constrained motion is that all points in a body
having such motion follow definite paths when the action of any
force produces motion. In ordinary machine construction, the
forces tending to move a constrained part from the desired path
are not absolutely counteracted, because the fixed members are
deformed somewhat \mder stress; the degree of such deflection ^
may readily be reduced to practicable limits, as it depends upon
the dimensions, form, and physical characteristics of the parts
which oppose the stresses.
Plane Motion. — Practically all of the movable parts of ma-
chines have either a plane motion, a helical motion, or a spherical
motion. A body has a plane motion when all points in that
body move in parallel planes. Nearly all movable machine
parts have plane motion. For instance, any point in the rim
of a flywheel, as at a (diagram i4. Fig. i), moves in a plane xx
perpendicular to the axis of rotation, and any other point, as at
6, moves in a plane yy parallel to xx. A part which moves
along a straight path also has plane motion. The piston,
piston-rod, or cross-head of a steam engine are simple examples.
Referring to diagram B, Fig. i, it will be seen that all points,
as at c and d^ move in parallel straight Unes. Plane motion
may be either rotation, translation, or a combination of these
TRANSMISSION OF MOTION 3
movements. When all points of a body move in concentric
circles about a fixed axis or at constant distances from a line
perpendicular to the planes in which the various points move, the
body has a plane motion of rotation, as illustrated by diagram A ,
Fig. I. Revolving pulleys, shafts, gears, cranks, etc., all have
a plane motion, of rotation; the motion may be either continuous
or intennittent. When all points move vith equal velocities
along parallel paths, the motion is known as rectilinear trans-
lation. The piston or cross-head of an engine, the carriage of
a lathe, and the table of a planer are all examples of this motion.
The dde rod of a locomotive represents an example of CW'
fl(. 1. Diacraai lUnitratiiig DUumt Unda of lIotloA
vilinear traitslation, as various points in the body of the rod
follow curved paths which lie in parallel planes. The word
" translation," when used al<me, is generally understood to mean
rectilinear translation. In plane motion, the motion of any
two points of a body determine the motion of the entire body.
For instance, if the motions of any two paints of a connecting-
rod are known for any period, the motion of the entire rod for
the period is also known.
Helical Motion. — When all points in a body have a motion
of rotation about a fixed axis, combined with a translation
4 MECHANICAL MOVEMENTS
parallel to the axis, this is known as " helical motion." The
movement of a nut along a screw is a common example of helical
motion. As a nut is screwed onto a bolt, any point, as at «
(see diagram C, Fig. i), moves around the axis zz and at the
same time advances, thus following a helical path, as indi-
cated by the arrows. The relation between the rotation about
axis zz and the translation parallel to this axis is constant
in nearly all applications of helical motion to machines; the
lead I or pitch of the helix, which corresponds to the transla-
tion for one complete rotation, is constant in a regular helical
motion.
Spherical Motion. — When all points in a body move in the
surfaces of imaginary spheres and at constant distances from a
fixed point or common center, the motion is '' spherical." There
are comparatively few examples of spherical motion in machine
construction. The '^ fly-ball " steam engine governor, illus-
trated by diagram D, Fig. i, is an example of spherical motion.
Variations in the speed of the engine cause the balls to swing
about the fixed point or center / as they revolve, so that the
movements coincide with a spherical surface. The ball-and-
socket joint is another illustration of spherical motion.
Velocity and Acceleration. — Velocity is the rate at which
a moving part changes its position, and numerically it represents
the imits of distance traversed in a imit of time. Thus the rate
of motion or the distance traversed divided by the time required
may be expressed in feet per second or minute, miles per hour,
etc. When the distance traversed by a point along its path in
a given time is expressed in linear measure, the rate of motion is
referred to as linear velocity.
When velocity is variable, the rate at which it changes is
known as acceleration . If the speed of a wheel having a peripheral
velocity of 20 feet per second is increased to 30 feet per second,
within a period of two seconds, the acceleration will be 5 feet
per second. If the change of velocity were at a uniform rate,
the acceleration would be constant, but, if the change of velocity
were not uniform, the mean acceleration in the preceding example
would be 5 feet per second; however, this does not necessarily
TRANSMISSION OF MOTION 5
represent the actiial rate of increase during any one second.
In the design of various classes of machines, the problem may
relate either to actual velocity, the rate of change or acceleration,
or to the ratio of the velocities of different parts.
Velocity Ratio. — The term " velocity ratio " relates to the
comparative velocities of driving and driven members. For
instance, if two gear wheels are so proportioned that one rotates
twice as fast as the other, the velocity ratio would be either
2 or ^, depending upon whether the gear having the higher
speed were mentioned first. If the driving gear had a velocity
of 50 revolutions per minute and th^ driven gear 25 revolutions
per minute, the velocity ratio of the driving to the driven gear
would equal f^ » 2. The actual velocity of these gears might
be changed, but the velocity ratio would be the same. Thus,
if the speed of the driving gear were doubled, the driven gear
would also rotate twice as fast and the ratio would still be 2 or
2 to I, as commonly expressed. The velocity ratio is of especial
importance in the design of various classes of mechanisms, owing
to the necessity of obtaining the proper relative motions between
movable parts.
Angular Velocity. — The angular velocity of a rotating body
is equivalent to the angle through which any radius of the body
turns in one second, and it is generally expressed in radians.
The angular velocity in radians is equal to the linear velocity
in feet per second, divided by the radius in feet, of the point on
the revolving body, the angular velocity of which is required.
If D equals the velocity of a point on the periphery of a body in
feet per second, and R equals the radius of the revolving body in
feet, then the angular velocity in radians equals -=;. For in-
R
stance, if a flywheel 12 feet in diameter revolves at 60 revolu-
tions per minute, the angular velocity will equal ^^-7
60
» 6.2832 radians. A radian is the angle subtended by an arc
equal to the radius of the circle forming the path of the point in
180
motion. One radian equals -. = 57-296 degrees.
3.1410
.>•
6 MECHANICAL MOVEMENTS
Cycle of Motions. — Machines and mechanisms of practically
all classes have moving parfp which, after passing through a
series of motions, all occupy the same relative positions as at the
beginning of the movements. The completion of the entire
series of movements constitutes a cycle. The cycle of a planer
or shaper corresponds to a forward and return stroke; in the
case of a steam engine, one revolution of the crank represents
a cycle. While gas and gasoline engines are commonly classified
as two-cycle and four-cycle, this use of the word " cycle " is
erroneous. The terms " two-stroke cycle " and " four-stroke
cycle " are preferable and accurate, since two strokes complete
a single cycle in one case and four strokes, a single cycle in the
other. The period of a cycle is the time elapsing while the mo-
tions constituting the cycle take place.
Positive Driving, — Motion is said to be transmitted positively
when the mechanical construction is such that the velocity ratio
of a driving and driven member remains constant. If two cylin-
drical parts having parallel axes are in contact, one can only
transmit motion to the other through frictional resistance at the
line of contact, ^th this arrangement, the resistance against
which motion could be transmitted would depend upon the
amount of friction, and there would be no positive assurance
that slippage between the driver and follower would not occur.
If it were possible to produce surfaces that were perfectly smooth,
a very small resistance would prevent the driver and follower
from rotating in unison. If instead of smooth cylinders, however,
teeth were provided, as in gearing, the drive would be positive
or compulsory, because slipping could not occur imless the teeth
were broken. A i>ositive drive has been defined as one so ar-
ranged that there is an increasing contact radius of the driver,
although this is not invariably the case. When the operation
of a mechanism depends upon the action of a spring or a weight
(gravity), it is a non-positive or force-closed mechanism, and is
generally considered inferior, mechanically, to the positive type,
although, in many cases, the non-positive method of transmit-
ting motion is entirely satisfactory and comparatively inex-
pensive.
1>
TRANSMISSION OF MOTION
General Methods of Transmittiaf j^otion. — The method of
transmitting motion from one movablib member of a machine or
mechanism to another part or combination of parts depends upon
the motion of the driving member and the kind of motion re-
quired for the driven member, the relation of one part to the
other as to the distance and position, the amount of energy or
power to be transmitted, and other factors. Ordinarily, motion
is transmitted by an actual contact of parts forming the mech-
anism, although this is not invariably the case, as the trans-
mission may be electrical and not mechanical or by physical
connection. The general methods of transmitting motion from
one part to another, which are commonly employed in different
kinds of mechanisms, will first be illustrated by simple diagrams
which merely show the principles involved. These diagrams
represent methods of transmitting motion from some form of
driving member or " driver " to a driven member or follower.
The practical application of these principles to various designs
in actual use will be considered in chapters to follow.
Direct Transmission by Shafting. -r A plain shaft which is
used as a connecting link between the shaft of one machine or
mechanism and the shaft of another represents an efficient
method of transmission, although, in this case, the shafting
rotates as a imit, and, therefore, it is not possible by this direct
form of transmission to change the velocity ratio of the driving
and driven members, as it is merely a rigid shaft and not a form
of transmission which, by varying the proportions or design,
will give a different relation between the speed of the driver and
follower. While the flexible shaft is also used extensively to
transmit motion, especially when the driven part must have a
free or imiversal movement, the driving shaft and follower also
rotate as a unit, and this method of transmission does not afford
means of changing the velocity ratio, as may be done with the
different forms of transmission to be described.
Link Mechanisms. — A link is a rigid body for connecting
parts of a mechanism, and it may be used for holding or guiding
some other member or combination of parts, or for transmitting
motion. There are many parts of machines which belong to
lA
8 MECHANICAL MOVEMENTS
the general class of links but which have special names. For
instance, when a link has an oscillating movement about some
aads or fulcrum, the names lever and rocker are commonly applied,
whereas, if the link makes complete revolutions, it may be classi-
fied as a crank. When a link is used to transmit motion from a
rotating crank to a part having a reciprocating movement, it is
usually called a connecting-rod or pUman. On a steam engine,
the connecting-rod joins the cross-head with the crank on the
main shaft. The motion of the eccentric is transmitted to the
valve by the eccentric rod, which is another example of the special
names applied to links. If a slotted member is used to connect
the ends of forward- and reverse-motion eccentric rods, this is
known as a '' link," as in the case of the well-known Stephenson
link motion for steam engines.
Applications of Levers. — Levers, as applied to different kinds
of mechanisms, are contmionly used to transmit motion from
one line or plane to another, and for guiding movable parts, as,
for example, the end of a rod having a reciprocating motion.
Levers which have an oscillating movement about a pin or
fulcrum may have parallel lines of motion, or lines of motion
which intersect. Diagram A, Fig. 2, shows a lever which trans-
mits motion from one line aa to another parallel line bb. As the
lever oscillates about pin c, the pins by which the two rods are
connected to the lever have a circular motion, as indicated by the
arcs. A line aa or bb, representing the general direction of the
motion, is called the center4ine of motion. In the case of a steam
engine of the reciprocating type, the center-line of motion is a line
passing through the center of the cylinder and the center of the
crankshaft. When the engine is running, the connecting-rod os-
cillates an equal distance each side of this center-line of motion.
Diagram B shows a lever having lines of motion aa and
bby which are not parallel. When the lines of motion intersect,
as in this case, the lever is known as a bellcrank lever, A lever
for reversing the direction of motion is shown at C, the fulcrum,
in this case, being between the driving and driven connecting
links; thus, when one rod moves to the right, the other rod
moves to the left, and vice versa, A lever for reversing the
TRANSMISSION OF MOTION 9
motioQ and changing its direcdon is shown at D. The fonn of
lever shown at £ is used for transmitting motion from one line
to another that is not in the same plane. Such a lever or " rocker
arm," as it is call«l, is used on locomotives equipped with the
Stephenson link motion to transmit motion from the eccentric
rods inside the frame to the valve rod on the outside. Diagram
F illustrates one of the many ways in which levers may be ap-
Varions Applicatioiu of LerMt
plied to obtain different results. In this case, the lever trans-
mits the motion of part e to / on a reduced scale. These two
parts are mounted in guides and move in straight parallel lines,
and the lever has elongated slots in which the pins slide. This
arrangement is shown as a reducing motion, and is sometimes
a[^)lied to steam enjpnes when taking indicator cards. The
part e represents the cross-bead and / a sliding bar which is
10
MECHANICAL MOVEMENTS
connected by a cord to the indicator drum, the motion of which'
must correspond to that of the cross-head, but on a reduced scale.
Levers may be arranged in other ways for reducing motion.
The lever method of reducing motion, however, has been re-
placed quite extensively by more compact and accurate forms
of mechanisms, such as the ^'reducing wheel." Motion is
transmitted from the cross-head to the indicator by cords that
wind about drums which vary in diameter and give the required
reduction of motion.
Position of Levers Relative to Lines of Motion. — In the
design of levers, there are certain points that should be observed :
Fig. 3. Methods of Applying linki
First, a line passing through the center of the fulcrum and the
center of the connecting pin should be at right angles to the
center-line of motion when the lever or lever arm is in its central
position. For instance, when center-line kk (see diagram 23,
Fig. 2) is in mid-position, it should be perpendicular to the
center-hue of motion aa so that the upper lever arm will move
an equal distance each way from this central position. Simi-
larly, line nn should be perpendicular to bb when the lower lever
arm is in mid-position.
A second point of importance is to so locate the connecting
pin that its center moves an equal distance each side of the
center-hue of motion; that is, the center of this pin should be
TRANSMISSION OP MOTION II
as far from the center-line of motion when at the end of its move-
ment as when in mid-position. The third point to consider is
the relative lengths of the lever arms or the distance from the
fulcrum to each connecting pin. The lengths of these arms
must be proportional to the extent of their motion. For in-
stance, the horizontal distance x (see diagram C) traversed by
the upper connecting pin for a given movement y depends upon
the relative lengths of arms c and d; thus x : c :: y : d^ OTyii c = 6
inches, rf = 12 inches, and y =» s inches, x = ^ = 2.5 inches.
Link Connection between Oscillating or Rotating Parts. — A
rigid link may be used to transmit motion from one oscillating
or rotating part to another. Diagram A, Fig. 3, illustrates how
two oscillating levers are connected by a link which simply
ties both levers together. The driving wheels of a locomotive
are connected by side rods or links, as shown at £, so that the
wheels rotate in unison. With a transmission of this kind,
dimensions ab and cd must be equal and also ac and bd so that
the four center-lines form a parallelogram. This method of
transmitting motion may also be employed for a series of rotating
parts. At C, three wheels are shown connected, and at Z),
three wheels which are not arranged in a straight line. In the
latter case, the link is of triangular form and its bearings must be
spaced to correspond with the distance between the fixed centers.
When the axes of the driver and follower are not parallel, links
may also be used to transmit motion, although such an arrange-
ment is not common except in universal joints.
Universal Joint or Hooke's Coupling. — A' form of link work
for transmitting motion between two shafts which are at an
angle to each other is shown at A^ Fig. 4. This is known as
a universal joint or Hookers coupling. The axes of each shaft
are in the same plane and, with the design of joint shown, they
have forked ends which are pivoted to some form of connecting
link h. The axes of the two shafts and of the pivots intersect,
as the illustration shows. As the shafts revolve, the connect-
ing link b between them receives a spherical motion, and, if the
driving shaft rotates at a uniform speed, a variable speed will
12 MECHANICAL MOVEMENTS
be imparted to the driven shaft, although it vill make the same
nmnber of revolutions in a given time. In order to sin^lify
the construction, the connecting pins of many universal joints
are offset as shown at B; when the axes of the pins do not
intersect, the variation in the angular velocity of the driven
shaft is somewhat increased. The speed of the driven shaft
is alternately less and greater than the speed of the driving
shaft. The variations in angular velocity between the driver
and follower can be eliminated by using a double joint, as at
C, and an intermediate shaft between the two main shafts
which has . the same inclination relative to each shaft. Uni-
Hg. 4. VnlTsnal Jofaita
versal joints which operate on the same general principle as
the designs illustrated in Fig. 4 are made in many different
forms.
Straigbt-line Motions. — A combination of links arranged to
impart a rectilinear motion to a rod or other part independently
of guides or ways is known either as a sU'aiglU4ine motion or
a paraiUl motion, the former term being more appropriate.
Mechanisms of this type were used on steam engines and pumps
of early designs to guide the piston-rods, because machine tools
had not been developed for planing accurate guides. The
TRANSMISSION OF MOTION 13
principal application of straight-line motions at the present
time is on steam engine indicators for imparting a rectilinear
movement to the pencil or tracing point. The principle of the
well-known parallel motion, invented by James Watt in 1784,
is illustrated by the diagram, Fig. 5. Links A and B are free
to oscillate about fixed pins at their outer ends, and are con-
nected by link C. A point D may be located on the center-
line of link Cy which follows approximately a straight line when
links A and B are given an oscillating movement, because,
when A moves from its central position, the center of pin E
moves to the left along its circular path while the center of
Fig. 5. Th« Watt straight-line Motion
pin F moves to the right. As the motion of point D is afifected
by both links A and £, it moves very nearly in a straight line,
provided D is correctly located and the angular motion of the
links does not exceed about 20 degrees. Very few straight-
line mechanisms produce a motion which is absolutely straight,
and the general practice is to so design them that the guided
part will be on the line when at the center and extreme ends
of the stroke.
Scott Russell Straight-line Motion. — The mechanism illu-
trated in Fig. 6 will give an exact straight-hue motion, but it
is necessary to have an accurate plane surface upon which
14
MECHANICAL MOVEMENTS
block C can slide. In addition to this sliding block, there are
two links AC and DB. The link DB is one-half the length
of ilC and the shorter link is connected at a i>oint B midway
between A and C. The shorter link oscillates about a station-
ary pivot at Z7 as end A is moved up or down along the straight
line AD, Since AB^ DB, and BC are equal, a circle with B
as the center will intersect points A, Z), C f or any angle DC A;
consequently, the line AD, traced by point A is perpendicular
to DC, since ADC is always a right angle.
Instead of having guides or a plane surface for the sliding
block C, the mechanism is sometimes modified by attaching
the block end of link ilC to another link which is free to oscil-
late about a fixed pivot so located that the link will be perpen-
Fig. 6. Th« Scott RttH«ll straight-lino Motion
dicular to the line CD, when in its mid-position. The longer
this link and the greater the radius of the arc described by the
connecting point at C, the more nearly will C move in a straight
line; hence, the longer this link, the less point A deviates from
a straight Une. This modification of the Scott Russell straight-
line motion is sometimes called the grasshopper motion.
Straight-line Motions for Indicators. — Some form of straight-
line motion is necessary on a steam engine indicator in order
that the motion of the indicator piston will produce a parallel
movement of the tracer point or pencil, which draws a diagram
on the paper or indicator card. The cylinder of the indicator
is open at the bottom and is connected by suitable pipes with
each end of the steam engine cylinder, so that the under side
of the indicator piston is subjected to the varjdng pressure
TRANSMISSION OF MOTION
IS
acting upon the engine piston. The upward movement of the
indicator piston resulting from the steam pressure is resisted
by a spiral spring of known resilience, and a rod extending
above the piston connects with some form of link work designed
to give a straight-line motion to the tracer point. When the
engine is running and the indicator is in commimication with the
steam cylinder, variations of pressure will be recorded by the
vertical movement of the pencil or tracer which is brought into
contact with paper wo\md about a cylindrical drum that is
rotated by the reciprocating motion of the engine cross-head.
Fig. 7. Straight-]ln« Motion of Thompion Indicator
The straight-line or parallel motion of one indicator is shown
in Fig. 7. The arm A which carries the pencil at its outer
end is pivoted to link B which, in turn, is pivoted to the top
of the indicator. As arm A moves upward, the outer end is
guided along a straight line by link C, which oscillates about a
fixed pivot and is connected to arm A at F. This mechanism
is so proportioned that a line from A to E intersects the point
at which link D is attached to the piston.
The straight-line motion of another steam engine indicator is
shown in Fig. 8. This mechanism, Uke the one previously
described, is so arranged that the fulcrum A of the entire mech-
l6 MECHANICAL MOVEMENTS
anism, the connection B, and the pencil point C are always
in a straight line. The fundamental principle of this mecha-
nism is that of the pantogn^h. If link D were removed and
replaced by another link at £, both parallel and equal in length
to FG, this would result in a wetl-known fonn of pantograph
mechanism. Hie length of link D to replace E may be deter-
mined as follows: The procedure is to first ascertain, by trial,
a convenient location for the point at which link Z) is to comiect
with link BG. The path followed by point H as end C is moved
along a straight line is plotted on a large scale for all positions
F1(. 8. TIm CiMbT 8tnlfhl-JiM u PuiUal Hotton
of the linkage within the required range of movement. This
path will be approximately the arc of some circle, and the fixed
pivot for link D is located at the center of this circle. If a
link at E were actually used in place of link D, a straight-line
motion at C could be obtained, providing the pivot B had a
strai^t-line motion. Any form of guide intended to insure a
straight movement at B would be objectionable, ance it is
dearable to r«luce tl:^ friction of mechanisms of this type to a
minimum. It is also essential to have the parts as light as
possible in order to minimize the inertia and the effect of mo-
mentum, which is e^)ecially troublesome when taking cards
from engines operating at high speed.
TRANSMISSION OF MOTION
17
With the parallel motion of another indicator, a pin on the
pencil arm corresponding to the one shown at F in Fig. 8 en-
gages a curved slot in a stationary plate which is secured to
the indicator in a vertical position. This curved slot takes the
place of a link, and its curvature is such as to compensate for
the tendency of the pencil to move in an arc.
Peaucellier Straight-line Motion. — The link mechanism
shown in Fig. 9 will give an exact straight-line motion. This
\o' ---^
■ .A 7'
D'
// V
— ^a /y _^ — ::^^A^
j^
A frvnL rf^^^
(c^ " tn/ ' Y?
^n
\
^^"^"^^AF
^0
X
^^'-^^^^^
/
vo"
Fig. 9. Amusement of Peaiicellier Linkage for Straight-line Motioa
mechanism was invented by Peaucellier, a French army officer.
It is composed of seven links moving about two fixed centers
of motion, A and B. The four equal links E form a rhombus;
the links F are equal, and the center B is midway between A
and C. If the point D be moved in the direction of the arrows,
it will be constrained to move in the straight path 1/1/', which
is perpendicular to the line of centers A BCD. This may be
x8
MECHANICAL MOVEMENTS
tested experimentally. The path of the point C is the circum-
ference ACC; and the path of GG' is the arc described with
the radius F. If the center-line of the links E and F be assumed
in any position such as ACD\ it will be found that the rhombus
the sides of which represent the length of the links E takes the
position shown in the drawing.
In Fig. 9, the centers A and B are external to the links E.
A variation of the linkage is shown in Fig. lo, iii which the
centers A and B are within the rhombus. The links F are
equal, and center B is midway between A and C, as in Fig. 9.
The corresponding links and points in the figures are labeled
1
^-— — ^^
D'
i
^, .^-^-^-"^""^ y^/
/x'V^^J^^n"""*^^ ^
^/^'^\t/y / ^^^w\^ /
>^ ^^^^ / / ^^^^^**^>i». ^
^
^'S-^ w^^
"v
c(^<^-
^^§V;j "".^ffi^" x/"* ' >>^
^D
>»\.
^^"^ J\\ ^— -"""'/ .X'^X^
X
\^ ^
^/ ^S^'^ / \_.A*'*^" / ^^^ ^^^
*V /
o«^/^^_^^^'"\ \ / ^y^\^^
\V
'^yy^
' '
1
Fig. 10. Modification of Poaocellior 8tndght-4iiio Mochanism
with the same letters; it may be shown experimentally that
the point D is compelled to move in a straight line perpendicular
to the line of centers CBAD,
Toggle Joint. — A link mechanism commonly known as a
toggle joint is applied to machines of diflFerent types, such as
drawing and embossing presses, stone crushers, etc., for securing
great pressure. The principle of the toggle joint is shown by
TRANSMISSION OF MOTION
19
the diagrams A and B, Fig. 11. There are two lints, b and c,
which are connected at the center. Link, b is free to swivel
about ft fixed pin or bearing at d, and link c is connected to a
sliding member e. Rod / j<Hns links b and c at the c^tral
connection. When force is applied to rod / in a direction at
ri^t angles to center-line xx, along which the driven member
e moves, this force is greatly multiplied at e, because a move-
ment at the joint g produces a relatively slight movement at
e. As the angle a becomes less, motion at e decreases and the
force increases imtil the links are in line, as at B. li R •* the
tlf. II. Dlasram fltoclntlac Action vi T»nle Jotnt
reastance at «; P - the applied power or force; and a - the
ai^le between each link and a line xx passing throu^ the axes
of the phis, then: j Rsm« = Pcosa.
Pantograph Mechanisms. — A pantograph is a combinaUon
of links which are so connected and proportioned as to length
that any motion of one point in a plane parallel to that of the
link mechanism will cause another point to follow a similar
path either on an enlarged or a reduced scale. Such a mech-
anism may be used as a reducing motion for operating a steam
engjne indicator, or to control the movements of a metal cutting
20
MECHANICAL MOVEMENTS
tool. For instance, most engraving machines have a panto-
graph mechanism interposed between the tool and a tracing
point which is guided along lines or grooves of a model or pat-
tern. As the tracing point moves, the tool follows a similar
path, but to a reduced scale, and cuts the required pattern or
design on the work.
A simple form of pantograph is shown by the diagram, Fig.
12. There are four links, a, b, c, and d. Links a and b are
equal in length, as are links c and J, thus forming a parallel-
ogram. A fifth connecting link e is parallel to links c and d.
This mechanism is free to swivel about a fixed center /. Any
•a-
-^--^^--^^
~-^>^
■--^':^-"
Fig. xa. Puktogra^ for Reprodvdiif Motion on a Rodocod or
Snlaif od Scalo
movement of h about / will cause a point ; (which coincides
with a straight line passing through / and A) to describe a path
similar to that followed by A, but on a reduced scale. For
instance, if h were moved to h following the path indicated by
the dotted line, point g would also trace a similar path.
Another form of pantograph mechanism is shown at il in
Fig. 13. This pantograph, which is sometimes called " lazy
tongs," is used to some extent for obtaining the reduction of
motion between an engine cross-head and the indicator drum
when taking indicator cards. The pantograph is pivoted at b
by a stud which may be secured to a block of wood or angle
TRANSMISSION OF MOTION
21
iron attached to a post or in any convenient place. The end
a has a pin which is connected to the cross-head of the engine.
The cord which transmits motion to the indicator drmn is
attached to the cord-pin 6 on a cross-bar. This cross-bar may
be placed in di£Ferent positions relative to the pivot b, by chanj^g
screws at c and d; the cord-pin e^ however, must always be in
line with the fixed pivot b and pin a. The position of the cross-
bar in relation to pivot b determines the length of the travel
of cord-pin e and, consequently, the rotary movement of the
Iff. 13. Pantograph Medumismi applied to SnciiM Cxota-lioad to Rodoca
Motion when TaUng Indi c a t or Carda
indicator drum and th6 length of the diagram which the pencil
traces upon the indicator card. The objection to this reducing
mechanism is the liability of lost motion resulting from wear
in the nimierous joints.
Another form of pantograph reducing mechanism is shown
at £ in Fig. 13. In this case, there are four links joined to-
gether in the form of a parallelogram, and one of the links is
extended and pivoted to the engine cross-head. The swivel-
22 MECHANICAL MOVEMENTS
ing movement of the pantograph is about the fixed pivot /, and
the cord which operates the indicator drum is attached at g.
As the illustration indicates, this point of attachment g coin-
cides with a line passing through the pivots/ and h, the same as
for the pantograph shown at 4 . If F = the length of the engine
stroke and L, the length required for the indicator diagram,
F:L^fk:fg, or | -•^.
Cams. — The name "cam'* is applied to various forms of
revolving, oscillating, or sliding machine members which have
edges or grooves so shaped as to impart to a follower a motion
which is usually variable and, in many cases, quite complex.
Cams are generally used to obtain a motion which could not be
derived from any other form of mechanism. Most cams re-
volve and the follower or driven member may have either a
rectilinear or oscillating motion. The acting surface of the cam
is in direct contact either with the follower or with a roller
attached to the follower to reduce friction. Different types
of cams are described in Chapter VII.
The Screw. — The screw, which is used in so many different
ways in machine construction, may be considered as a type of
cam having one or more grooves of helical form. One important
difference between a cam and a screw is in the follower which
endrdes the screw and is in contact with the groove or thread
throughout several turns. When a screw is used primarily to
transmit rectilinear motion to a nut or follower, its rotation
must, of necessity, be reversed, unless provision is made for
disengaging the follower and returning it by other means, since
the thread groove or grooves wind about the screw only in one
direction. The lead-screw of a lathe may rotate continuously
when cutting a thread, because a split nut on the carriage may
be disengaged from the lead-screw when the carriage is to be
returned to the starting position. The axial movement of the
follower or nut for each revolution of the screw will equal the
lead of the thread. The lead is equivalent to the pitch or dis-
tance between the centers of adjacent threads, if the screw has
TRANSMISSION OF MOTION 23
a single thread. The lead of a double-threaded screw equals
twice the pitch, and for a triple-threaded screw, three tunes the
pitch. The lead then equals the distance that any one of the
threads of a multiple-threaded screw advances in one complete
turn and also the distance that a nut would advance if given one
complete tium. The object of using multiple-threaded screws
is to increase the lead and resulting axial motion of the nut or
screw per revolution, without weakening the screw by cutting
a single thread of coarser pitch into it, and also to avoid using
a single-threaded screw of larger diameter.
When a screw imparts motion to a follower, the latter does
not always move parallel to the axis of the screw, as in the case
of a nut. For instance, if a screw is in mesh with a wheel having
teeth which successively engage the screw threads, the wheel
may be given a rotary motion. This form of transmission will
be referred to later in connection with gearing.
Ttansmission by Friction Gearing. — When rotary motion
does not need to be transmitted positively, driving and driven
members which are in contact and simply roll against each other
are used for some classes of mechanisms. Transmissions of
this kind are conunonly classified as '' friction gearing." The
diagram A, Fig. 14, illustrates the principle of a friction drive
for parallel shafts. The pinion a may consist of flanges betwe^i
which paper, straw fiber, or some other material which will give
a high coefficient of friction is compressed. This pinion may
bear against a cast-iron wheel. The action is purely frictional
as the pinion and wheel revolve together and the velocity ratio
remains constant, unless the resistance to motion exceeds the
frictional resistance.
Diagram B shows a form of fricrion gearing which has been
used quite extensively for varying the feeding movements of
metal-cutting tools, etc. The smaU '^ brush wheel " c in this
case bears against the flat face of a cast-iron disk i, and the
relative speeds are varied by changing the radial position of
wheel c. If brush wheel c is cylindrical, there is the disadvan-
tage that its surface (which has a uniform peripheral velocity)
is in contact with plate d the surface velocity of which varies
24 MECHANICAL MOVEMENTS
accoidiiig to the radius at any point. For instance, the velocity
of <f is greater at the outer comer of wheel c than at the inner
comer of c; therefore, the wheel should be as narrow as is prac-
ticable, and the edge is sometimes rounded to reduce the contact
area. Leather fiber wheels are recommended for friction gear-
Tlf . t4- Vrictioiul Spur uid B«Td OMiini fw Tnuumlttiiif Hotkn
; when the face width is small and the contact pressure ex-
Friction gearing of the bevel type is illustrated at C.
Diagram D illustrates in principle a type of friction gearing used
for varying the speed of parallel shafts. The driving and driven
members are conical and are separated somewhat so that motion
TRANSMISSION OF MOTION 25
is transmitted through an intermediate part which may be in
the form of a wheel or band that may be shifted for varying
the speed.
The ppwer that can be transmitted through friction gearing
depends upon the physical character of the materials forming
the surfaces in contact and also upon the normal pressure be-
tween these two surfaces. For instance, if one wheel is formed
of paper and the other of iron, the coefficient of friction of
the paper wheel against the iron wheel in conjunction with the
pressure with which they are held in contact will determine the
driving value. This pressure must not be great enough to
injure the paper, and the friction material should be of a very
firm texture to enable it to endure high pressure without a re-
duction of the frictional coefficient, as a small reduction of the
latter factor would offset the effect of a relatively large gain
in pressure-enduring qualities. Friction materials are now avail-
able which combine the essential qualities of durability and
driving power very satisfactorily. When a paper wheel is in
contact with a cast-iron wheel, the former should preferably be
the driving member, because it is made of softer material and its
surface would be injured and eventually ruined by even occasional
and momentary rotation of an iron wheel against it under pres-
sure, as when starting from rest, especially with an excessive
load. When the softer paper wheel is the driver, if the resist-
ance to motion exceeds the frictional resistance so that slipping
occurs, the tendency is to wear off the edge of the rotating driver
evenly instead of forming a flat spot upon it, as would be the
case if it were the driven member and remained stationary.
The method of applying contact pressure is adapted to con-
ditions, but, in general, the lever-operated eccentric box or
thrust box is commonly used; it is a simple method for giving
hand or power control. In some cases, more elaborate devices
are used. The pressure may be positively applied and it may
be made to vary automatically as the load increases or decreases.
As friction is essential to the of>eration of this type of gearing,
care should be taken to prevent any great reduction of the
driving power by the accumulation of grease or other foreign
26 iCECHANICAL MOVEMENTS
matter on the friction surfaces. Rigid support for the friction
wheels and the maintenance of a good contact between the work-
ing surfaces are al^ of importance. Friction gearing is not a
suitable form of transmission where it is essential to maintain
a prescribed relation between driving and driven parts of a
mechanism throughout an entire cycle of operations. In some
cases, however, a transmission whi'^h is not positive is prefer-
able in that it constitutes a safety device and prevents the trans-
mission of shocks or an excessive amount of power to parts of
a mechanism which might thereby be injured. Friction gearing
is also very simple in design, and operates smoothly and quietly.
Transmission by Tooflied Gearing. — The sUpping that often
occurs when motion is transmitted by cylinders or cones which
roll in contact may be avoided by employing wheels or gearing
having teeth or projections which intermesh and insure a positive
drive and a constant velocity ratio. In designing the teeth of
gearing, the object is to so shape the contact surfaces that the
motion obtained will be equivalent to friction gearing when no
slipping occurs. Toothed gears for transmitting motion be-
tween parallel shafts as shown at E, Fig. 14, are known as spur
gears. This is the most common type of gearing, and it is found
in all classes of mechanisms. The pitch circles e and / corre-
spond to cylinders in contact, and the teeth, if correctly formed,
will transmit a continuous and unvarying motion between the
driving and driven gears. If one of the spur gears could be
straightened out, as indicated by the dotted lines, until the
pitch drde is changed to a straight line ;, this would be known
as a rack. A spur gear meshing with a rack will transmit to the
latter a straight-line movement, when it is the driving member,
and receive rotary motion when the rack is the driver. This
form of gearing is applied in many different ways.
When toothed gearing has pitch surfaces which correspond to
the frustums of rolling cones, as shown at F, it is known as
bevd gearing. This type of gearing is usually employed to con-
nect shafts which are at right angles, although the angle a may
be greater or less than 90 degrees. When the shafts are at right
angles and the pitch diameter of both gears is equal, they are
TRANSMISSION OF MOTION
known as miler gears. The axes of ordinary bevel gears lie in
the same plane. The skew bevel gear is a special form for con-
necting shafts which are at an an^e to each, other and not In the
same plane. This fonn of gearing has been used very little.
Another type of gearing for shafts which are not parallel and
which do not lie in the same plane is shown at A, Fig. 15. This is
called spiral gearing or, more properly, helical gearing. The
pitch surfaces are cylindrical, the same as with ^ur gears, but
the teeth, instead or bdng parallel to the axes, follow helical
Rf. i5> spiral aod T«nn QeuUc lor Trumitttaf MotloB
curves lite screw threads; for this reason, helical gears are some-
times called screw gears. The axes of the shafts may be at
ri{^t an^es, as shown in the illustration, or at some other angle.
If the distance between the shafts is not great enough to permit
using helical gears, it may be necessary to resort to skew bevel
gears. Helical gearing is sometimes used for connecting parallel
shafts instead of spur gears, especially when smoothness of action
and hig^ speed are essential. The general practice is to use a
double helical or herringbone gear which corresponds to two
helical gears placed together, having right- and left-hand teeth
in order to eliminate end-thrust. A herringbone gear on one
88
MECHANICAL MOVEMENTS
shaft meshes with a herringbone gear on another shaft and, as
the teeth are of right- and left-hand obliquity, the end-thrust
resulting from the angularity of the teeth is neutralized.
The warm gearing shown at B, Fig. 15, is similar in principle
to spiral gearing; the worm usually has either a single or a
double thread which meshes with the teeth of the worm-wheel.
The worm is the driver and the velocity ratio depends upon the
nimiber of teeth m the worm-wheel and the ntmiber of threads
on the worm. For instance, if the worm-wheel has 40 teeth, 40
revolutions of a single-threaded worm will be required for one
Fig- 16. Tnniiiiltiion of Motion by Meant of a Bait, Chain, and
Flaiible Band
revolution of the worm-wheel, whereas a double-threaded worm
would revolve 20 times for one revolution of the worm-wheel.
A single-threaded worm is, in reality, a spiral gear having one
continuous tooth. There are many special forms of gearing,
some of which will be described later.
Ttansmission by Flexible BandSi Ropes, or Chains. — A
very common method of transmitting motion from one shaft to
another is shown at A, Fig. 16. A pulley or wheel is attached
to each shaft and a continuous band or belt extends around both
pulleys so that they rotate in unison, provided the frictional
TRANSMISSION OF MOTION 29
resistance between the belt and pulley rims is sufficient to trans-
mit the required amount of energy or power. The connecting
belt or band for pulleys of the form shown may be of leather,
cotton, or cotton and rubber composition. Thin steel bands
operating upon smooth rimmed pulleys have also been used to a
limited extent. For drives of the type illustrated at A, leather
belts are generally used, although belts made of cotton duck
impregnated with rubber are extensively used, especially where
the belts are exposed to the weather or to the action of steam,
as they do not absorb moisture or stretch as readily as do leather
belts. Canvas stitched belting saturated with oil is also fre-
quently used in preference to either leather or rubber (cotton
duck and rubber) belting. The shafts may be parallel or at an
angle, and frequently the belt is guided by idler pulleys in its
passage from one pidley to another. Belts are usually flat bands,
although round belts operating upon grooved pulleys are often
used, especially upon smaller classes of machinery. Cotton and
Manila ropes have been used in many factories and mills for
transmitting power from the power plant to different lines of
shafting, although this type of transmission has been replaced
to a considerable extent by electrical equipment. With the
English or multiple system, a nimiber of parallel ropes are used;
each rope forms a continuous belt, and the required number are
placed side by side in grooves formed in the rims of the driving
and driven sheaves or pulleys. With the continuous or American
system, one long rope winds around and fills all the grooves of
the driving and driven pulleys, and is guided from the last groove
back to the first one by an idler pulley.
Many classes of mechanisms to which the belt type of trans-
mission is applicable require a positive drive, especially when it is
necessary to transmit considerable power from one shaft to
another and the distance between the shafts is comparatively
small. Belts composed of chain links which engage teeth
formed on the sprockets are extensively used. (See diagram B,
Fig. 16.) The chain transmission is often applied where the
center-to-center distance between shafts is too short for leather
or similar belting and too long for transmitting motion by gearing.
30 MECHANICAL MOVEMENTS
The teeth of the sprockets engage the spaces between the link
blocks or rollers, and a positive drive is thus obtained. As there
is no initial tension on the chain, the pull on the shaft bearings
and the resulting friction is reduced. The chains used for this
purpose vary in regard to the form and accuracy of the links and
sprockets. For either belt or chain drives, the velocity ratio or
relative speed of the driving and driven pulleys or sprockets
depends upon their respective diameters.
The belts, ropes, or chains previously referred to are for trans-
mitting rotary hiotion continuously. Flexible bands are some-
times used to impart rotary motion to a reciprocating shaft.
Diagram C, Fig. i6, illustrates one application. The steel bands
or ribbons, a and b, are wrapped about dnmi c, and the ends of
these bands are attached to the dnmi. The outer ends of the
bands are also attached to some stationary member. When the
shaft carrjdng drum c is given a reciprocating movement in a
plane xXy as illustrated by the dotted lines, the dnmi is caused
to revolve in conjimction with the traversing movement, first in
one direction and then in the other. This particular form of
mechanism is used for generating involute curves on the teeth of
gear-cutters, by holding the hardened cutter on the arbor of
drum c and rolling it in contact with the plane face of a grinding
wheel, the wheel face representing the side of an involute rack
tooth. Mechanisms operated in this way necessarily have a
reciprocating motion, since the rotary movement reverses as the
band is wrapped and unwrapped around the dnmi. A hoisting
mechanism of the type which has a dnun and an attached rope
that is woimd and unwoimd for raising and lowering a load is
another example of transmission by a flexible connector. In
many cases, the drum to which one end of the rope is attached
is the driver while hoisting the load, whereas, in lowering, the
drum is driven in a reverse direction by the action of gravity
on the load.
Ttains of Mechanisms. — While a single pair of pulleys and a
connecting belt, or a single pair of meshing gears, may be em-
ployed for transmitting motion from one shaft to another, it is
often desirable or necessary to use a series of pulleys or gears
TRANSMISSION OF MOTION
31
between the driving and driven shafts. Various combinations
of links, cams, etc., may also be used to connect driving and
driven members. In general, any series of pulleys, gears, links,
cams, etc., regardless of their order or combination, is known
as a irain of mechanism. If motion is transmitted entirely
through gearing, the combination of gears is called a gear train.
Trains of gears, pulleys, etc., are common to all classes of mech-
anisms and may be necessary either for obtaining a required
Fig. 17. Train of Pnlleyi and Trains of Oearinf
velocity ratio or for transmitting motion when the driving
and driven members are so located that a more direct method
of transmission is not practicable. Motion is often transmitted
through trains of gearing specially arranged so that speed changes
may readily be obtained by manipulating suitable controlling
levers.
The diagram A, Fig. 17, shows a train of pulleys for trans-
mitting motion from pulley a to pulley d. Pulleys a and c are
drivers and pulleys b and d, followers. If the speed of pulley
a and the diameters of all the pulleys are known, the speed of
pulley d may be foimd as follows: Find the product of the
32 MECHANICAL MOVEMENTS
diameters of the driving pulleys; divide by the product of the
diameters of the driven pulleys, and multiply the quotient by
the revolutions per minute of the first driving pulley a. If the
^>eeds for pulleys a and d are given and it is desired to find the
diameters of all the pulleys, proceed as follows: Find the speed
ratio by placing the number of revolutions of the driving pulley
as the numerator and the number of revolutions of the driven
pulley as the denominator of a fraction, and reduce this fraction
to its lowest terms. Then divide both the numerator and
denominator of the fraction, thus expressing the ratio as two
factors, and multiply each ** pair '' of factors by the same num-
ber until pulle3rs with suitable diameters are found. (One fac-
tor in the numerator and one in the denominator are considered
as " one pair.") Sometimes motion is transmitted through more
than one pair of pulleys, especially when the required velocity
ratio is high, to avoid using one very large pulley and one very
small one.
Trains of Spur Gears. -— A train of four spur gears is shown at
Bf Fig. 17. The number and arrangement of gears in a train
vary considerably. The shafts may all lie in the same plane or
be in different planes, and the train of gearing may serve other
purposes than merely transmitting motion from one shaft to
another. The driver e transmits motion to gear g through an
intermediate gear / called an idler gear. While the " idler "
affects the direction of rotation, it does not affect the velocity
ratio. Idler gears are used on many engine lathes for connecting
the " change-gears " of different sizes used for screw cutting.
The idler stud is carried by an adjustable arm or plate, and its
position is varied to suit the diameters of the driving and driven
gears. The arrangement shown at C is known as compound
gearing; this term is applied whenever there is one or more pairs
of gearing in the train, attached to the same shaft or stud.
Assuming that h is the driver, motion is transmitted to driven
gear f, and by the second driver j of the train, to driven gear k.
The direction of rotation of the first and last gears in a train
will be opposite if the number of axes be even, but, if there is an
odd number of axes, the first and last gears will revolve in the
TRANSMISSION OF MOnON 33
same direction. The relative q>eed3 of two gears running in
mesh are inversely as their diameters or numbers of teeth. For
instance, if a driving gear has 20 teeth and a driven gear, 60
teeth, three revolutions of the driver will be required for one
revolution of the driven gear. To obtain the speed of the driven
gear, multiply the number of teeth in the driver by its speed in
revolutions per minute, and divide the product by the number
of teeth in the driven gear. An idler gear placed between the
driving and driven gears will not affect the result.
To determine the speed of the last gear of a compound train
of gearing, find the product of the diameters or numbers of teeth
of all the driving gears; divide by the corresponding product of
all of the driven gears, and multiply the quotient by the revo-
lutions per minute of the first driving gear. This rule may also
be applied when belt pulleys and gears are combined in one train.
With such combination, the diameters of the pulle3rs, and either
the pitch diameters of the gears or the numbers of teeth, could be
used in making the calculations.
EpicycUc Gear Trains. — If one of the gears in a train is fixed
or stationary, and another gear (or gears) revolves about the
stationary gear in addition to rotating relative to its own axis,
the mechanism is known as an epicyclic train of gearing, because
points on the revolving gears describe epicycloidal curves. The
two gears a and b (see diagram A, Fig. 18) are held in mesh by a
link c. If this link remaios stationary and gear a makes one
revolution, the number of revolutions made by gear b will equal
the number of teeth in a divided by the number of teeth in 6, or
the pitch diameter of a divided by the pitch diameter of b. If
a and b represent either the pitch diameters of the gears or num-
bers of teeth, the revolutions of b to one turn of a equal t . If
o
gear a is held stationary and link c is given one turn about the
axis of a, then the revolutions of gear 6, relative to arm c, will
also equal r- , the same as when gear a was revolved once with the
o
arm held stationary. Since a rotation of arm c will cause. a
rotation of gear b in the same direction about itd axis, the total
MECHANICAL UOVEMENTS
number of revolutions of gear b, relative to a fixed ^axxe, for one
turn of c, will equal i (the turn of c) plus the revolutions of b
relative to c, or i 4- r ■ For example, if gear a has 60 teeth and
Flc. 18. EpIcrdiG or FUnettry OMiint
gear b, 20 teeth, one turn of arm c would cause b to rotate — , or
3 times about its own axis; gear b, however, also makes one turn
about the axis of gear a, so that the total number of revolutions
relative to a fixed plane equals i H — - 4 revolutions.
TRANSMISSION OF MOTION 35
In order to illustrate the distinction between the rotation of
b around its own axis and its rotation relative to a fixed plane,
assume that 6 is in mesh with a fixed gear a and also with an outer
internal gear that is free to revolve. If the speed of the internal
gear is required, it will be necessary, in calcxilating this speed,
to consider not only the rotation of b about its own axis, but also
its motion around a, because the effect of this latter motion on
the internal gear, for each turn of link Cj is equivalent to an
additional revolution of b.
Diagram J3, Fig. 18, represents an internal gear d in mesh
with gear e on arm/. If arm/ is held stationary, the revolutions
of e for one turn of d equal - , d and e representing the numbers of
c
teeth or pitch diameters of the respective gears. If the internal
gear is held stationary and arm / is turned about axis g, the
rotation of e about its axis will be clockwise when / is turned
counter-clockwise, and vice versa; hence, the revolutions of gear
e, relative to a fixed plane, for one turn of / about g, will equal
the difference between i (representing the turn of f) and the
revolutions equal to - •
e
Method of Analyzing Epicyclic Gear Trains. — A simple
method of analyzing epicyclic gearing is to consider the actions
separately. For instance, with the gearing shown at A, Fig.
18, the results obtained when link c is fixed and. the gear a (which
normally would be fixed) is revolved are noted; if gear a is re-
volved in a clockwise direction, then, in order to reproduce the
action of the gearing, the entire mechanism, locked together as a
unit, is assumed to be given one turn counter-clockwise. The
results are then tabulated, using plus and minus signs to indi-
cate directions of rotation. Assume that gear a has 60 teeth and
gear 6, 20 teeth, and that + signs represent counter-clockwise
movements and — signs clockwise movements. If link c is held
stationary and gear a is turned clockwise (—) one revolution,
gear b will revolve covmter-clockwise (+) |^ revolution. Next
consider all of the gears locked together so tiiat the entire com-
bination is revolved one tiun in a counter-clockwise (+) direc-
36 MECHANICAL MOVEMENTS
tion, thus returning gear a to its original position. The prac-
tical effect of these separate motions is the same as though link
c were revolved once about the axis of a fixed gear a which is
the way in which the gearing operates normally. By t£dt)ulating
these results as follows, the motion of each part of the mechanism
may readily be determined:
Gcar« Unk« G«arft
Link Stationary — i turn o turn 4-H ^^^™
Gears Locked 4- z turn +x turn 4- 1 turn
Number of Turns o +1 +4
The algebraic sums in line headed *^ Number of Turns " in-
dicate that, when gear a is held stationary and link c is given one
turn about the axis of a, gear b will make 4 revolutions relative
to a fixed plane in a counter-clockwise or + direction, when
link c is turned in the same direction.
The application of this method to the arrangement of gearing
shown at J3, Fig. 18, will now be considered. Assume that gear
d has 60 teeth and gear e, 20 teeth. Then, if gear d is turned
clockwise with link / stationary, and the entire mechanism with
the gears locked is turned covmter-clockwise, an analysis of the
separate motions previously referred to will give the following
results:
Gtud Link/ G«ftr«
Link Stationary — i turn o turn — l(tum
Gears Locked +t turn +1 turn +1 turn
'I II ■
Number of Turns o -hi — 2 i
*
E£fect of Idler in Epicyclic Gear Train. — If an idler gear i
is placed between gears a and b (diagram C, Fig. 18), the latter
will rotate about its axis in a direction opposite to that of the
link (the same as with the arrangement shown at J3), and the
revolutions of gear 6, relative to a fixed plane, for one turn of
link h about the axis of a, will equal the difference between
I (representing the turn of h) and the revolutions equal to f .
Assume that gear a has 60 teeth, idler gear i, 30 teeth, and gear
6, 20 teeth. Then the turns of 6, relative to a fixed member for
one turn of h about the axis of a, are shown by the following
analysis:
TRANSMISSION OF MOTION 37
GMr« Idlttf Uakk Gearft
Link Stationary — itum +f{ turn o turn — ]{ turn
Gears Locked +1 turn +1 turn +i turn +1 turn
Number of Turns o +3 -|-i —2
The direction of rotation of b, relative to a fixed member, may
or may not be in the same direction as that of link h, depending
upon the velocity ratio between gears a and b. If gears a and b
are of the same size, one turn of link h will cause b to revolve
once about its own axis, but, as this rotation is in a direction
opposite to that of A, one motion neutralizes the other, so that
b has a simple motion of circular translation relative to a fixed
member. If gear b were twice as large as a, it would then re-
volve, for each complete turn of link A, one-half revolution about
its own axis, in a direction opposite to the motion of h', this
half turn subtracted from the complete turn of link h gives
a half turn in the same direction as h, relative to a fixed
member.
Compound Train of Bpicyclic Gearing. — Diagram Z>, Fig.
18, illustrates a compound train of epicyclic gearing. This ar-
rangement modified to suit different conditions is commonly em-
ployed. Gear a represents the fixed member and meshes with
gear k, which is attached to the same shaft as gear /. Gear /
meshes with gear b the axis of which coincides with that of
fixed gear a. Assume that gear a has 36 teeth, gear k, 34 teeth,
gear /, 35 teeth, and gear by 35 teeth. Then one turn of link n
about the axis of gear a would give the following results:
Gt$xs Linkw GcanibaiKl/ Geub
Link Stationary — i turn o turn +1} turn — (ff X H) ^^^n
Gears Locked 4-i turn +1 turn +1 turn +1 turn
Number of Turns. .. . o -hi 4-2tV —tV
From this analysis, it will be seen that, for each counter-
clockwise turn of link n, the rotation of gear b equals i —7X7,
in which the letters correspond either to the pitch diameters or
nimibers of teeth in the respective gears shown at Z> in Fig. 18.
If the value of 7 x 7 is less than i, gear b will revolve in the same
k
38 MECHANICAL MOVEMENTS
direction as link n, whereas, if this value is greater than i,
gear b will revolve in the opposite direction.
Compound epicyclic gearing may be used for obtaining a very
great reduction in velocity between the link n and the last gear
b in the train. As an extreme example, suppose gear a has 99
teeth, gear k, 100 teeth, gear /, loi teeth, and gear 6, 100 teeth.
The speed of gear b will equal i — — = revolu-
100 X 100 10,000
tion; hence link n would have to make 10,000 revolutions for
each revolution of gear 6. The arrangement of epicyclic gearing
shown at D is known as a reverted train.
Diagram E shows another arrangement of reverted train.
An internal gear t forms part of the mechanism, and either this
gear, frame 9, or pinion p may be the stationary member, de-
pending upon the application of the mechanism. In this case,
instead of a single set of gears between p and /, there is a double
set located diametrically opposite and connected by a suitable
frame q. This arrangement is similar to the mechanism of a
certain type of geared hoist. The central pinion p is the driving
member, internal gear t is stationary, and the frame q is the
driven member and imparts motion to the hobting sheave.
Sun and Planet Motion* — A mechanism of the general type
illustrated by diagram Ay Fig. 18, was employed by Watt for
transmittmg motion from the connecting-rod to the engine shaft,
because the crank motion had been patented previously. This
mechanism is known as a '' sim and planet " motion, the fixed
gear a representing the sun and the revolving gear 6, the planet.
In applying this mechanism to an engine, one gear was keyed
on the shaft and the other was fixed to the connecting-rod. The
connecting link between the gears was loose on both shafts.
A forward and return stroke of the piston caused the connecting-
rod gear to pass once around the shaft gear, but without revolving
on its own axis, as it was attached to the connecting-rod. With
this arrangement, if both gears are of the same diameter, the
shaft gear will make two revolutions for one turn of the connect-
ing link between the gears or one revolution for each stroke.
CHAPTER n
spbbd-<:hanging and controlling mechanisms
The speed at which a machine or mechanism operates may
be either imiform or variable, and be controlled either auto-
matically or by some form of hand-manipulated device. If
the motion is transmitted by a combination of gearing or other
mechanical means, the rate of speed may be varied by changing
the velocity ratio of the mechanism that transmits the motion.
When the rate of speed depends upon the action of a fluid such
as steam, the speed may be regulated by controlling the amount
of steam that is used and the resulting pressure against the
moving element. The object in regulating and controlling the
speed of a machine depends upon the type of machine and its
use. If it is utilized in manufactiiring a certain product, the
rate of speed may be limited by the nature of the operation it
performs; moreover, the speed may need to be varied at times
because of changes in operating conditions. This is frequently
the case with machine tools. Another important use for speed-
regulating mechanisms is to vary the motion of some operating
tool-slide or other part which must move at a rate depending
upon conditions that are subject to change. The speed regu-
lation of a prime mover such as an engine or a steam turbine is
to insure a uniform speed regardless of ordinary variations in
the resistance to motion of the driven member or changes in the
steam pressure.
When speed variations are essential to the operation of ma-
chines such, for example, as are used for some kinds of manu-
facturing work, the changes are usually obtained by hand-con-
trolled speed-changing devices. If such variations are seldom
required, it may be necessary to stop the machine and make an
adjustment, or replace one or more gears with others of differ-
ent diameters. When changes of speed are frequently needed,
3A 39
40 MECHANICAL MOVEMENTS
the machine is generaUy equipped with some mechanical device
enabling one or more variations to be obtained ra^ndly, by sim-
ply moving a wheel, lever, or rod which controls the combi-
nation or velocity ratio of the mechanism through which the
motion is transmitted. If the machine is of the automatic
type, the speed may be regulated according to varying conditions,
by the mechanism of the machine itself, which is constructed
or adjusted beforehand to give the proper changes. The exact
arrangement of the details depends, in any case, upon conditions
such as the speed- variation required, the importance of rapid
changes, the relation of the speed-controlling mechanism to
other parts of the machine, etc.
Mechanical devices for varjdng the speed are of special im-
portance on machine tools. In fact, most machine tools are so
constructed that the speed of the cutting tool or of the part
being operated upon can be varied, the range or extent of the vari-
ation depending upon the type of machine. These changes are
desirable in order to cut different kinds of metal at the most
efficient speed; for example, soft brass may be turned, drilled,
or planed at a much higher si>eed than cast iron or steel, and,
by using the fastest speed that is practicable, obviously the rate
of production is increased. Another important reason for speed
variation is to secure the proper surface speed for revolving parts,
regardless of the diameter, and the correct cutting speeds for
rotating tools of different sizes. In the case of lathes or other
turning machines, the speed of the work is increased as the
diameter decreases, in order to maint^iin a cutting or surface
speed which is considered suitable for the kind of metal being
machined. Similarly, drilling or boring machines are so de-
signed that the speed of the drill or boring bar can be varied in
accordance with the diameter of the hole being drilled or bored.
The design of this part of any machine tool involves determining
the minimum and maximum speeds that would ordinarily be
required, the total number of variations, the amoimt or incre-
ment by which each step or change varies, and the design of the
mechanical device for securing speed changes and transmitting
them to the work-spindle or tool. These speed-changing devices
SPEED-CHANGING MECHANISMS
41
usually consist of different combinations of gearing, although
belt-driven pulle3rs and friction gearing are often utilized.
Types of Mechanical Speed-changing Mechanisms. — When
a variation of speed is obtained by changing the velocity ratio
of two or more parts forming a train of mechanism, one of the
following methods is generally employed: (i) By means of
conical pulleys connected by a belt or cone-pulleys having
" steps " of different diameters upon which a connecting belt
may be shifted; (2) by the use of cone-pulleys in conjimction
with one or more sets of gears; (3) by means of toothed gears
exclusively, with an arrangement that enables the motion to be
Flf. X. stepped Cones and Conical Pulleys for yaryinc Speeds
transmitted through different ratios or combinations of gearing;
(4) by employing a friction transmission consisting of driving
and driven disks, pullejrs, or wheels, so arranged that one mem-
ber (or an intermediate connecting device) can be shifted relative
to the axis of the other for varying the speed. These different
types or classes of speed-changing mechanisms are constructed
in various wa3rs.
Arrangement of Cone-pulley Drives. — Diagram A^ Fig. i,
illustrates a very simple arrangement for varying speeds, and
one which has been extensively employed in connection with
machine tools and other classes of machinery. Two cone or
stepped pulleys are so located that the large and small steps of
one pulley are opposite the small and large steps of the other
42 MECHANICAL MOVEMENTS
pulley; consequently, when a connecting belt is shifted from one
step to another, the speed is varied. If pulley a is the driver
and the belt is in the position shown, the driven pulley b will
rotate at the fastest speed, and the speed will be gradually di-
minished as the belt is shifted toward the right. In designing
cone-pulleys, it is important to proportion the different steps so
that a belt of fix6d length will have approximately the same
tension for any position on the pulley.
In the operation of some machines, it is desirable to secure
very gradual speed changes, without stopping the driving and
driven members for shifting a connecting belt. One simple
way of securing such changes is illustrated by the diagrams B
and C, Fig. i. The pulleys in this case are either frustums of
cones, as shown at J3, or of conoidal form, as at C. The form
shown at B is suitable for a crossed-belt, since the crossing of
the belt makes it equally tight at corresponding positions on
the two cones, which would not be the case with an open belt.
When the latter is required, it is preferable to use the curved
cone as illustrated at C. While the conical or conoidal pulleys
provide very gradual speed changes, the belt tends to shift
toward the large end of these pulle3rs, although such action may
be prevented by the guide used for moving the belt to obtain
speed changes. Special means of compensating for the taper
of the driving and driven cones have been devised. One form
of patented cone-pulley drive consists of two conical pulleys of
the form illustrated at B\ these pulleys are connected by an
open belt which, instead of bearing directly on the pulleys,
passes over inner bands or belts beveled on the inner face to
correspond with the taper of the pulleys. There is one of these
compensating bands or auxiliary belts for each pulley; ^ese
belts are traversed with the main driving belt when the latter
is shifted for varying the speed. Another patented method of
compensating for the taper of cone-pulleys is arranged as fol-
lows: Instead of connecting the two pulleys directly by one belt,
two belts are used, which transmit motion through an inter-
mediate double cone-pulley, which is shifted with the driving
belt for obtaining speed changes.
SPEED-CHANGING MECHANISMS
43
Combinatioii <rf Cone-palley and Gearing. — One method of
using a cone-pulley in conjunction vith gearing is illustrated
by diagram A, Fig. 2. This particular arrangement is com-
monly employed on engine lathes and is known as" back-gearing."
When the pulley is driving the spindle direct, it is usually locked
to the spindle by means of a bolt which connects it with the
" face gear " d, the latter being attached to the spindle. For the
direct drive, the back-gears are disengaged and the main spindle
and cone-pulley revolve together. By disengaging the cone-
Gear and Cona-pull*T Comblnatioiu tor Varjinc Spaed
pulley from gear d so that it rotates freely about the spindle and
engaging the back-geara, motion is transmitted from the " cone
gear " o to gear fr, and frcrac tod; in this way, the range of speeds
obtained by the direct drive is doubled. With a four-step cone-
puUey, there would be four direct s[>eeds and four slower speeds
with the back-gears engaged, the drive being so proportioned
that a gradual increase of speeds from the minimum to the maxi-
mum, or vice versa, may be obtained. The sleeve which carries
the two back-gears revolves about a shaft having eccentric bear-
44 MECHANICAL MOVEMENTS
ings at the ends, so that, by turning this shaft with a lever, the
back-gears are engaged or disengaged.
Many modem engine lathes have double back-gears, one
arrangement being shown at B. There are two cone gears a and
b and two mating gears c and d on the rear shaft, so that a double
range of geared speeds may be obtained, in addition to varia-
tions secured with the direct drive; thus, with a three-step cone-
pulley, there would be a total of nine speeds. The gears c and
d are shifted along the rear shaft for changing their position
relative to the cone gears. A modification of the double back-
geared drive is so arranged that the two gears on the rear shaft
are connected by a friction clutch controlled by a conveniently
located lever. Another design of lathe headstock gearing is com-
monly known as " triple gearing," although this term is not al-
ways applied to the same form of drive by machine-tool builders.
Ordinarily, however, a lathe is said to be triple-geared when
there are two gear shafts. The cone-pulley speeds are doubled
by driving through one combination of gears, and a third range
of speeds is obtained by transmitting the motion through the
other combination, the pinion of the second shaft being engaged
directly with a large internal gear on the faceplate. Triple
gearing is used on large lathes and the direct drive to the face-
plate provides a very powerful turning movement, such as is
required for taking heavy cuts on castings or forgings of large
diameter.
Cone-iralley and Bpicyclic Gearing. — The use of a cone-
pulley and planetary or epicyclic gearing is shown at C, Fig. 2.
The cone-pulley has a pinion a, which meshes with pinion 6,
mounted on a stud carried by plate c. Pinion b also meshes with
an internal gear forming part of casting e. This casting and the
cone-puUey are both loose upon the shaft, but plate c is keyed
to it. When lock-pin d engages a notch in plate c, the gears are
locked together and the shaft is driven directly by the cone, the
entire mechanism revolving as a unit. When lock-pin d is en-
gaged with a stationary arm g, the internal gear is prevented
from rotating and motion is transmitted to the spindle of the
machine from the cone-pulley, as pinion a causes pinion b to re-
SPEED-CHANGING MECHANISMS 45
volve about the stationary internal gear and carry with it plate
Cy which transmits a slower speed to the spindle than is obtained
with the direct drive. This design, which has been applied to
some upright drilling machines, is sometimes known as a " differ-
ential back-gear."
Another cone-puUey containing epicydic gearing is shown
by the diagram D, Fig. 2. Bevel gears are employed in this
case, instead of spur gears, and the combination is known as
" Humpage's gear." This gearing was designed originally to
replace the back-gearing of a lathe, but it has been applied to
various classes of machinery. When used in conjunction with
a cone-pulley, the arrangement is as follows: The cone-pulley is
loosely moimted on its shaft and carries a pinion a which meshes
with gear b. This gear is locked to pinion c, thus forming a
double gear that is free to turn about arm dy the hub of which
is also loosely moimted on the spindle or shaft. Gear b meshes
with gear /, whereas pinion c meshes with gear e. Diametri-
cally opposite arm d, there is another anp which carries gears
corresponding to b and c. This additional gearing is included
because of its balancing effect and need not be considered in
studying the action of the gearing. The gear e is keyed to the
spindle, and, except when a direct drive is employed, gear / is
stationary. With the fulcrum gear / stationary and gear a
revolving, gear e and the spindle are rotated at a much slower
speed, as the arm d and the intermediate connecting gears roll
around gear/. The direction in which gear e rotates for a given
movement of gear a depends upon the ratio of the gearing, and
the direction may be reversed by changing the relative sizes of
the gears. When the ratio -^ is less than i, gears a and e will
revolve in the same direction, whereas, if this ratio is greater than
I, they will revolve in opposite directions. This is a very com-
pact form of gearing and the velocity ratio may be varied con-
siderably by a sli^t change in the relative sizes of the gears.
f X c
The velocity ratio when -^r is less than i may be determined
by the following formula, in which the letters represent the num-
46 MECHANICAL MOVEMENTS
bers of teeth in the gears marked with corresponding reference
letters in the illustration:
Ratio =
a
f X c
bxe
bxe
If gear a has 12 teeth, by 40 teeth, c, 16 teeth, e, 34 teeth, and
/, 46 teeth, then,
Ratio = ^^,"^' , ^aL^ XO.S3
^ ^ 46x16 __aa. ^^
40 X 34 8s
Therefore, gear a will revolve 10.53 times while gear e is making
f X c
one revolution. If the expression "V is greater than i, the
formula may be changed as follows:
Ratio = 7 —
6 X e
Geared Speed-changing Mechanisms. — When toothed gear-
ing is used exclusively in a speed-changing mechanism, the most
common arrangements may be defined as the (i) sliding-gear type;
(2) the clutch-controlled type; (3) the gear-cone and sliding-
key type; (4) the gear-cone and expanding-clutch type; (5) the
gear-cone and tumbler-gear type; and (6) the multiple crown-
gear and shifting-pinion type. Diagram A, Fig. 3, illustrates
the principle of the sliding-gear design. One of the parallel
shafts carries two fixed gears, a and c; the gears b and d on the
other shaft are free to slide axially so that motion may be trans-
mitted either through gears a and b or c and d. The first com*
bination gives a faster speed than the latter, because driving
gear a is larger than gear c. For obtaining a greater range of
speeds, two or more sets of sliding gears are used in many cases.
Clutch Method of Control. — Diagram B, Fig. 3, illustrates
the use of a dutch for controlling speed changes. This clutch
is located between the two driven gears and it can be engaged
SPEED-CHANGING MECHANISMS 47
with either of these gears by a lengthwise movement effected
usually by a lever. While this dutch is free to slide axially, it is
prevented from revolving about the shaft by a spline or key.
The driven gears, however, tiun freely about the shaft imless
engaged by the dutch. A positive dutch is shown in the dia-
gram, or one having teeth whidi engage corresponding notches
in the hubs of the gears; many of the dutches for speed-changing
mechanisms, however, are of the friction type.
Tig, 3. DUgMou fltnaiTBtliic IHflerMit Tjpa* of AU-gaarad Sp«ad-
In the diagrams A and B, single-belt pulleys are shown upon
the driving shafts. This is a conunon method of rotating the
initial driving shaft of speed-changing mechanisms of the all-
geared type, the shaft rotating at a constant speed and all of
the changes being obtained by the shifting of gears or dutches.
On many machines, however, the single constant-speed belt
pulley is replaced dther by a motor of the constant-speed type
or one of the variable-speed type.
48 MECHANICAL MOVEMENTS
Intermeshing Gear Cones and Sliding Key. — The use of
intenneshing gear cones and a sliding key for changing speeds is
represented by diagram C, Fig. 3. Two cones of gears are
mounted upon parallel shafts so that they intermesh, one shaft
being the driver and the other, the driven member. All of the
gears on shaft a are attached to it, whereas those on shaft b are
free to revolve around the shaft, except when engaged by the
key Cf which can be shifted from one gear to another by moving
rod d. If the key were in the position shown by the diagram,
the drive would be through gears g and e; ii a were the driving
shaft, the speed of shaft b could be increased by engaging the
key with gears to the left. Obviously, the niunber of speed
changes corresponds to the number of gears in the cone.
The driving end of the key projects through a slot in the shaft
and the edges are beveled to an angle of about 45 degrees, so
that, as the key is moved in a lengthwise direction, it will be
depressed by the action of the beveled edge against a steel washer
or guard n placed between each pair of gears. With this arrange-
ment, the key is completely disengaged from one gear before
meshing with the next one, which is essential with a drive of
this kind. The key is forced upward into engagement with the
keyways of the different gears, by means of a spring beneath it.
A modification of the mechanism just described is so arranged
that, instead of locking the gears in the upper cone by means of
a sliding key, each gear is fitted with a ring which may be ex-
panded by means of a wedge, the action of which is controlled by
suitable means. The gear-cone and sliding-key mechanism is
applied to many different types of machine tools, although this
form of mechanism is usually installed either for transmitting
feeding motion or in connection with spindle drives which re-
quire a relatively small amount of power.
Gear-cone and Tumbler-gear Mechanism. — The arrange-
ment of a gear-cone and tumbler-gear mechanism is represented
by diagram D, Fig. 3. There is a cone of gears on shaft a and
a pinion b which is free to sUde on a splined shaft and is con-
nected with cone gears of different diameters, by means of the
tumbler gear c. The ttunbler gear is carried by an arm which
SPEED-CHANGING MECHANISMS 49
can be shifted parallel to the axis of the gear cone for aligning
the tiunbler gear with any one of the cone gears; this arm can
also be moved at right angles to the axis of the gear cone for
bringing the tumbler gear into mesh with the various sizes of
gears composing the cone (as shown by the dotted circles), and
provision is made for locking the arm in its different positions.
Cone-and-timxbler gearing is not always arranged as shown by
diagram D] for instance, the tumbler gear, instead of engaging
with a pinion mounted upon a splined shaft, may mesh with a
long pinion, or the tumbler gear may be carried by a frame
which is adjusted to bring the timibler gear into mesh with the
different cone gears. Another modification consists of a cone
of gears which are adjusted axially for alignment with the tumbler
gear which is only moved in a radial direction.
Multiple Crown-gear and Shifting Pinion. — The multiple
crown-gear type of speed-changing mechanism is represented
by diagram £, Fig. 3. The crown gear g has several concentric
rows of teeth, and the speed is varied by shifting the pinion
h so that it engages a row of larger or smaller diameter. This
mechanism has been applied to drilling machines for varying
the feeding movements of the drill.
The design and application of the various kinds of speed-
changing mechanisms previously described, and the exact ar-
rangement of the gears or other parts are governed very largely
by the type of machine and the general nature of the work which
it does. Mechanisms of the same general type are often con-
structed along different lines, and in many cases various com-
binations are employed.
Frictional Speed-changing Devices. — Friction gearing of
various forms is applied to some classes of machinery as a means
of obtaining speed changes, although the other types of speed-
changing mechanisms previously referred to are much more
extensively employed. The frictional type is simple in design
and has the further advantage of providing very gradual speed
changes. If a definite relation, however, must be maintained
between the driving and driven members, the frictional trans-
mission is not suitable, but, in some cases, the fact that it is
50 MECHANICAL MOViaiENTS
not positive and tends to sUp when subjected to excessive loads
b a good featiue, as it serves to protect the driven mechanism
ag^nst otcessive stresses.
Fig. 4 shows a type of frictional ^}eed-changing mechanism
which has been quite generally used, the detaib of construction
being modified somewhat, owing to variations in the amount of
power to be transmitted and other factors affecting the design.
The particular arrangement referred to is applied to a Norton
running-balance indicating machine. The motor which drives
the machine revolves the leather-faced driving disk A which is
FIt> 4< Speed-eliansiiii MechaaUm of Frietioa DUk uid Whed Ttp*
in contact with a steel wheel B. The vertical shaft pasang
through the driven wheel transmits motioo to a horizontal shaft
(not shown) at the top of the machine, which, in turn, revolves
whatever part is to be tested for running balance. Variations
in the speed of the work are obtained by changing the por-
tion of wheel B relative to the axis of the driving disk A. The
adjustments of wheel B are controlled by a hand lever provided
with a notched quadrant for holding it in a given position. This
hand lever is connected with the slide of wheel B by link C. A
reversal of motion is obtained by simply shifting wheel B to the
opposite side of the axis of the driving disk. The wheel is held
SPEED-CHANGING UECHANISMS
51
against the leather-faced disk with sufficient pressure by means
of springs F which are provided with screws for varying the com-
presdon. If the leather di^ becomes flattened out or thin fiom
wear, the wheel B may be adjusted inward by means of stap-
screwsG. The leather disk, is held in place by a retaining ring H.
With a mechanism of this kind, the adjustments for chai^pi^
the speed should only be made when the driving disk is running.
Many speed-changing mechanisms of the fricdon type have
o[q>o^ng cones which
are connected by some
intermediate member
that may be adjusted
to vary the ^wed.
The use of an ordinary
belt has already been
referred to. Rg. 5
shovs an arrangement
for regulating the
speed of a driven shaft,
by chanj^ the posi-
tion of a wheel A
placed between the
driving cone B and the
driven cone C. These
two cones are made
of cast iron and the
bearing surface of the
intermediate wheel is
formed of leather disks
held in place between two flanges or collars. This particular
mechanism is used for varying the feeding movement of a
cold-metal saw. The handle D connecting with a screw is used
for controlling the position of the intermediate wheel and the
rate of speed. A dial at E shows the rate of feed per minute,
this dial being connected through shaft F and a gear at the lower
end with a rack on the adjustable member, so that any change
in the position of the wheel is indicated by the dial. The lower
52 MECHANICAL MOVEMENTS
friction cone is held in contact with the wheel by means of
a spring G, the tension of which may be regulated by lever
H. This lever is provided with graduations so that the same
tension as well as the rate of feed per minute may be dupli-
cated.
Another method of transmitting motion from a driving to a
driven cone is shown in Fig. 6, which illustrates the Evans fric-
tion cones. The two cone-pulleys are not directly in contact
with each other, but bear against a band or ring of leather which
Fie* 6. Friction Conot which transmit Motion throoch Adjostahlo
Lonthtr Rinc or Belt
serves to transmit the motion. The speed of the driven cone is
varied by simply shifting this leather ring so that it bears against
a larger or smaller part of the cones. If cone A is the driver,
the speed of cone B woidd be gradually increased if belt C were
shifted toward the right, since the practical effect of this shifting
movement is to increase the diameter of the driving puUey.
This mechanism is used ordinarily as a variable-speed counter-
shaft. There are two general methods of starting or stopping
the driven members. Some friction cones are so arranged that
the leather ring is shifted to a parallel part of the cones for dis-
engaging the drive, and others are so designed that one cone is
SPEED-CHANGING MECHAIOISMS 53
raised and lowered by the shifting lever, thus starting and stop-
ping at the same qieed.
Hult^e-disk Type of Speed-changing Mechanism. — The
vaiiable-speed mechanism shown in Fig. 7 is an ingenious design
that is applied to some of the Brown & Shaipe cylindrical grind-
ing machines for changing the lotary speed of the part being
ground and also the rate of the table traverse. Three levers
grouped around a dial at the front of the machine are used for
Kg. 7, Holtlple IiictlM Diik Type ct Speed-chusiiii Ha^uUm
controlling the mechanism. The position of lever A governs the
rotary speed of the work, and another lever in front of the circular
dial (not shown in the illustration) serves to change the rate of
the table traversing movement. These changes of work speed
and table traverse are entirely independent. The long lever R is
used for starting and stopping the rotation of the work and the
traversing movement of the table simultaneously. The mecha-
nism is driven from a driving shaft which runs at a constant
54 MECHANICAL MOVEMENTS
speed and connects with coupling B. The sprocket C is con-
nected to the reversing mechanism and drives the table trav-
erse. Another sprocket (not shown) is connected by a pair of
silent chains and a splined shaft, with a driving member for
the headstock.
The mechanism operates as follows: The shaft F carrying
coupling B drives shafts G and H at a constant speed through
spur gearing. The shafts G and H carry a series of hardened
steel disks moimted on square portions of the shafts. These
disks J and K are groimd slightly convex and each group of
disks intermeshes with another group or series of hardened steel
disks L and M. Each of these driven disks has a rim at the
periphery so that the point of contact with the driving disk is
always at the outer edge. The shafts G and H are mounted in
swinging brackets N and P, both of which pivot on shaft F,
thus allowing the position of disks / and K to be varied relative
to the disks L and M, If the convex disks J are swung towards
the recessed disks L, the surfaces of disks J, which actually do
the driving, decrease in radius and, consequently, the speed of
disks L and their shaft also decreases. The lever A controls the
position of bracket P and the speed of the headstock, whereas the
lever at the front of the dial (not shown) controls bracket N
and the feeding movements of the table. Motion is trans-
mitted to these brackets through bevel pinions meshing with
segment gears on the brackets.
With this mechanism, slight variations in speed may be ob-
tained while the machine is in motion. When lever R is shifted
for stopping the machine, a cam at the end of shaft S operates
a lever which relieves the pressure applied to disks L and M by
the springs shown at T and U. This lever also applies brakes
which quickly stop the table and headstock. When the lever
is raised for starting the mechanism, the disks L and M grip
the intermeshing disks / and K, and the driven members are
started without shock, the action being very similar to the well-
known multiple-disk friction clutch. A plunger pump at V
pumps oil from the bottom of the case to a distributor at the top
which lubricates the entire mechanism.
SPEED-CHANGING MECHANISMS
55
CoQcave Friction Disks and Inclined Wheel. — The f rictional
variable-speed transmission shown in Fig. S is an example of
the type having annular concave f rictional surfaces engaged by
an intermediate wheel the inclination of which is varied for
changing the speed. The principle upon which the device
(grates is illustrated by the diagram at the left. The two disks
havii^ annular concave surfaces are rotated from some source of
power and run loose on shaft A which is driven at a variable
^>eed. Ilie intermediate wheel D is pivoted at to arm B, so
that it can be indined as indicated by the dotted lines. The
drive to shaft A is transmitted through arm B. When wheel
D is parallel to shaft A , as shown in the illustration, and the two
disks B and C are revolving in oppo^te directions at the same
speed, wheel D will simply revolve about pivot O, and arm B and
shaft A will remain stationary. If wheel D is indined, however,
as indicated by the dotted line EF, the contact surface at E will
be revolving at a higher drcumferential speed than the surface
F on disk C; consequently, pivot O, arm B, and shaft A will be
^ven a rotary motion, the rate of which depends upon the angu-
larity of wheel D. The greater the angularity, the greater will
$6 MECHANICAL MOVEMENTS
be the difference in the diameter of the contact surfaces of disks
G and C and the higher the speed of shaft A, By inclining
wheel D in the opposite direction, the rotation of shaft A can
be reversed.
A variable-speed mechanism designed on this principle is
shown at the right of the diagram in Fig. 8. A bevel gear H
mounted on the end of the driving shaft revolves the two bevel
gears / and K moimted on shaft ^4, which is the driven member.
These bevel gears / and K have annular concave surfaces which
engage the cork surface of wheel D, This wheel revolves on an
aimular ball bearing, the inner race of which is attached to
ring M pivoted on a stud carried by arm B. The angular posi-
tion of wheel D is controlled by a lever L integral with the pivoted
ring M. This lever is connected with ring Q which is engaged
by a forked lever similar to the form used for shifting clutches.
An objection to variable-speed mechanisms based on this
principle is that the variation of speed does not change the torque,
so that, even though there is considerable speed reduction, the
torque will not be proportionally greater, because the limiting
factor for the torque is the frictional adherence between the
driving and driven contact surfaces, and this frictional resistance
is independent of the speed at which the shaft A is running; con-
sequently, while variable-speed devices in general are of such
construction that the torque increases when the speed decreases,
in the present case the speed is variable, while the torque re-
mains constant. As the main feature of variable-speed devices
is often not the variation of speed as much as the increased torque
obtained by a decrease in speed, the objection referred to is one
of great importance.
Friction Disk and Epicyclic Gear Combination. — A very high
velocity ratio or great reductions of speed, as well as extremely
small variations of speed, may be obtained by the mechanism
to be described. This mechanism (see Fig. 9) is a combination
of friction disks and a train of epicyclic or differential gearing.
The two disks D and E are free to revolve upon the vertical
shaft C, and the hubs of these disks form the bevel gears F and G,
Between these two bevel gears are the additional gears T and
SPEED-CHANGING MECHANISMS
S7
/ mounted on pin Hy which is attached to shaft C. The disks
D and E are in frictional contact with wheels N and 0, and
their position is regulated by screw K^ which is rotated through
disks L and R, If wheel N is revolved and disks D and E are
equidistant from the axes of wheels N and (as shown in the
illustration), both disks will revolve at the same speed, but in
opposite directions. As gears F and G also rotate at the same
speed, the intermediate
gears T and / merely re-
volve idly upon pin F,
which remains in one
position. Any change in
the position of disks D
and E relative to the
wheels N and will re-
sult in reducing the speed
of one disk and increas-
ing the speed of the other
one; consequently, gears
T and / begin to advance
around whichever gear P
or G has the slower mo-
tion, so that pin H and
shaft C revolve in the
sdme direction as the
more rapidly revolving
gear. If disks D and E
are only moved a small amoimt from the central position, the
differential action in the gearing and the motion of shaft C will
be at a very slow rate. The direction of rotation may be
changed by moving the disks upward or downward.
Centrifugal and Inertia Governors. — When the regulation of
speed is automatically controlled, some form of governing
mechanism of the centrifugal type is commonly employed.
Many of the governors used on steam engines depend for their
action upon the effect of centrifugal force on a rotating element.
In the case of a " fly-ball " governor (see diagram Z?, Fig, i,
Fig. 9. Combinatioii of Friction Disks and
Bpicydic Gear Train for Obtaining Great
Reduction of Speed
S8
MECHANICAL MOVEMENTS
Chapter I) weights or balls attached to pivoted levers are re-
volved by the engine and if the speed increases above normal,
the balls or weighted levers move outward from the axis of
rotation, owing to the increase in centrifugal force. This change
in the position of the revolving balk may be transmitted
through sviitable connecting levers and rods to a valve which
partly closes, thus reducing the steam supply. When a governor
of this type is applied to a Corliss engine, the release of the steam
valves and the point of cut-off is controlled directly by the
governor. Most gov-
ernors of the fly-ball
type are equipped
with one or more
springs which tend to
resist the outward
movement of the re-
volving balls.
The inertia or cen-
trifugal-inertia gover-
nor, which is now
used so extensively, is
attached to the fly-
wheel and regulates
the speed by varying
the position of the
eccentric or crankpin
that operates the valve. The general principle upon which this
type of governor operates is illustrated by the design shown in
Fig. lo. This particular governor has an inertia bar A with
enlarged ends to increase the weight at the ends. This bar is
pivoted at B where there is a roller bearing to reduce the fric-
tional resistance. The eccentric C is attached to the inertia bar
and it has an elongated hole or opening to permit movements
relative to the crankshaft. Directly opposite the eccentric is
a third weight Z), which balances the effect of gravity on the
eccentric. A heavy coil spring E is attached to the inertia
bar. A rod F is pivoted to the bar on the opposite side of
Fig. 10. Centrifugal-inertU Type of EAgine
Governor
SPEED-CHANGING MECHANISMS 59
bearing B and is connected to a loose-fitting piston in the oil
dashpot G.
The flywheel revolves in the direction shown by the arrow and
speed variations cause a slight movement of the inertia bar
about its bearing in one direction or another, thus changing the
position of the eccentric, which changes the point of cut-off. If
the speed increases, the inertia bar lags behind momentarily
and the steam is cut off earlier during the stroke because the
eccentric swings inward and shortens the travel of the valve.
If a sudden increase of load should cause the engine to nm slower,
lever A, as a result of its inertia, would tend to continue nmning
at the faster speed, which would swing the lever forward about
bearing B in the direction of rotation, thus increasing the valve
travel and admitting more steam to the cylinder by delaying the
point of cut-off. The spring end of the inertia bar is the heavier
and the speed of rotation depends entirely upon the equilibrium
between the centrifugal force acting upon the inertia bar and
the tension of the spring, while the actual movement of the
governor parts is effected by the inertia of the weighted end of
the bar. The sensitiveness of the governor may be varied by
adjusting a by-pass valve upon cylinder G. Other governors of
this general type vary in regard to the form of the weighted
lever and the arrangement of springs or other details. The
inertia type is preferable to the purely centrifugal design for
engines subjected to sudden and decided load changes.
CHAPTER ni
CONVERSION OF ROTARY AND RECTILINEAR MOTIONS
Machines of many difiFerent types are equipped with some
form of mechanism for changing a rotary motion to a rectilinear
or straight-line motion, or vice versa. The design of such a me-
chanism may depend upon the kind of motion required, the
amount of power to be transmitted, or other considerations.
In this chapter, the common or standard methods are described,
and also a number of special mechanisms.
Crank and Connecting-rod. — The crank and connecting-rod
illustrated in Fig. i is a very simple and common arrangement
which, when applied to a steam or gas engine, changes the rec-
tilinear movement of the piston and cross-head to a rotary mo-
tion for revolving the crankshaft of the engine. This crank
mechanism is also used frequently on machines of many differ-
ent types, not only to transform rectilinear to rotary motion,
but to secure a rectilinear movement from a driving member
which revolves. The air compressor is an example of the latter
application, the rotation of the crank, in this case, being changed
to a rectilinear motion for the compressor piston, and there are
many other examples to be foimd in practice. The distance
traversed by the part moving in a straight line is equal to the
diameter of the circle described by the center of the crankpin,
and this distance is known as the stroke.
Dead-center Position. — When the center of the crankpin is
at either A or B (Fig. i), it is said to be on the " dead center,"
because the crank and connecting-rod are then in line, and a
force or pressure applied to the piston or cross-head will not
cause the crank to revolve, so long as it remains on the dead
center or in line with the direction in which the force is applied.
To avoid difficidty in starting engines of the duplex type, such
as locomotives, for instance, the crankpins are located 90 degrees
60
ROTARY AND RECTILINEAR MOTIONS
6l
apart, so that, when one engine is on the dead center, the other
crankpin is in position for transmitting the maximum amount
of power; thus there is never any difficulty in starting.
Relative Motions of Crankpin and Cross-head. — In some
cases, especially in connection with steam engine work, it is im-
portant to note the relative motions of the crankpin and cross-
head, or whatever part has a straight-line movement. The
crankpin has a practically uniform velocity, but the sliding
Vlg. I. Diagrami ihowinc ReUtlTe Motions of Crankpin and Croaa-
head
member, which in the case of a steam engine consists of the cross-
head and piston, has a variable velocity. Each time the cross-
head reaches the end of its stroke, it starts from a state of rest
and the velocity increases during approximately one-half of its
stroke and then decreases until the cross-head again comes to a
state of rest at the opposite end of the stroke. The relative
positions of the crankpin and cross-head also vary at every
point of the stroke; for instance, when the crankpin is in the
mid-position (as shown in Fig. i), the cross-head is a distance
63 MECHANICAL MOVEMENTS
X away from the center of its stroke. The position of the crank
when the cross-head has traversed one-half its stroke is indicated
by the lower diagram. If the crank were rotating in the direc-
tion indicated by the arrow, it would turn through some arc a
less than 90 degrees, to bring the cross-head to its mid-position,
and through a greater arc b for the remaining half of the stroke
of the cross-head. It will thus be seen that the relative motion
between the cross-head and crank during the first half of the
stroke is different from that of the second half. This variation
in movement is further illustrated by locating the distances
that the cross-head moves for equal movements of the crank;
for example, if the crank is moved through an arc ^ , from the
dead-center position, the cross-head will move a distance y, but
if the crank is placed on the opposite dead center and then
moved through an arc i , which is equal to c, the cross-head will
move a distance 2, which is less than y. This is due to the fact
that one-half of the crankpin circle curves toward the cross-head,
whereas the other half curves away from it. This variation of
motion has an important effect on the design of steam-engine
valve-gears, and it is objectionable in some types of mechanisms.
(The connecting-rod shown in Fig. i was drawn somewhat shorter
than it should be, in order to magnify the effects of angularity.
The length of the connecting-rod from the center of the cross-
head wrist-pin to the center of the crankpin is usually equal to
from 4^ to 6^ times the crank radius, on steam engines.)
The Eccentric. — The eccentric is a modified form of crank
and produces a motion similar to that of an ordinary crank
and connecting-rod. The eccentric may be considered as a
crankpin which is so enlarged that it surroimds the main shaft.
In reality, the eccentric g (see Fig. 11, Chapter I) is mounted on
the shaft and is surroimded by an eccentric strap h to which
the connecting-rod is attached. The eccentric is very useful
when a relatively small movement is required, and it is not prac-
ticable to obtain it by a crank located at the end of the shaft.
Eccentrics have been extensively used for operating steam engine
valve-gears, and for many other purposes. The distance from
the center of the eccentric to the center of the shaft upon which
ROTARY AND RECTILINEAR MOTIONS 63
it is mounted is known as the eccerUricity. The eccentricity
corresponds to the radius of an equivalent crank. The terms
" throw " and " eccentricity " are sometimes used interchange-
ably, but, according to general usage, the throw is equal to the
diameter of the circle described by the eccentric center, and it is
equivalent to twice the eccentricity.
Crank and Slotted Cross-head. — The irregularity in the mo-
tion of a cross-head relative to the crank with the form of crank
mechanism illustrated in Fig. i depends upon the length of the
connecting-rod. If an arc is struck from point D with C as a
center, the distance e will represent the displacement of the
cross-head from its mid-position when the crank has turned
through 90 degrees. As the radius CD representing the length
of the connecting-rod is increased, obviously there will be less
irregularity in the motion. For instance, if E were taken as a
center and ED represented the length of the connecting-rod,
the displacement of the cross-head from mid-position would be
less, as indicated by dimension/. Therefore, it will be seen that
the greater the length of the connecting-rod, the less the irreg-
ularity of motion. If it. were practicable to use a connecting-
rod of very great length, an arc intersecting point D and the
horizontal center-line would only be a very slight distance from
the center of the main shaft. With such an arrangement, the
horizontal movement of the cross-head would be practically the
same as the movement of the crankpin measured horizontally.
If the connecting-rod were of infinite length, theoretically the
movement of the cross-head and crankpin in a horizontal direc-
tion would be alike.
A simple form of mechanism for eliminating the irregularity
of motion previously referred to is illustrated at il in Fig. 2.
This mechanism is known as a '' crank and slotted cross-head "
or the Scotch yoke. The cross-head a has a slot which is at
right angles to the center-line xx representing the direction of
rectilinear movement. The crankpin carries a block, which is a
sliding fit in this slot, and is free to revolve about the pin. As
the crank revolves, the distance which the crankpin moves, as
measured in a horizontal direction, will be the same as the move-
64 MECHANICAL MOVEMENTS
meat of the cross-head. This mechanism is sometimes called
a harmonic motion, because if the crank rotates uniformly, the
cross-head will be given a harmonic motion. When a point, as
at b, moves with uniform velocity along a circular path, point
c will have a harmonic motion along the center-line xx; hence,
harmonic motion may be defined as the movement of a point
along the diameter of a circle, which is projected from a point
moving with uniform velocity along the drcumference.
The crank and slotted cross-head has been applied to some
types of steam pumps. One of the rods extending from the
aotted CroiMiMd oi Scotch Toka
slotted cross-head carries the steam piston and the other, the
water piston. The crank is a driven member, and its radius
regulates the length of the stroke. By mounting a flywheel on
the crankshaft, steam may be cut off before the end of the stroke
and used expansively, because of the energy stored in the fly-
wheel. The crank and slotted cross-head is a very compact
form of mechanism, although the sliding motion of the block in
the slotted member causes more friction and wear than the or-
ROTARY AND RECTILINEAR MOTIONS 65
dinary crank and connecting-rod of the type shown in Fig. i.
The latter is also simpler in construction and is, therefore, used
almost exclusively as an engine connection, as well as for many
other classes of machinery.
The diagram B, Fig. 2, shows a modification of the crank and
slotted cross-head or Scotch yoke. This mechanism gives the
same motion as the one illustrated at A, but the cross-head has
two slots at right angles to each other, so that it can be placed
Rf. 3. StatloiuuT Cnuk and RerolTliic C^indan
anywhere on a continuous shaft. The vertical slot is for the
sliding crank block, whereas the horizontal slot forms a clear-
ance space for the shaft. With this design, the crank could be
placed at any intermfdiate point on the shaft without using a
center crank. It is not as compact, however, as form A , and the
vertical slot is not continuous, which is an objectionable feature.
Cylindere which Revolve about a Stationary Crank. — A crank
which is connected to a piston or other reciprocating port or-
66 MECHANICAL MOVEMENTS
dinarily revolves, but a piston may be given a rectilinear motion
relative to a cylinder by holding the crank in a fixed position
and revolving the cylinder, connecting-rod, and piston about the
crank. An example illustrating this method of utilizing the crank
is shown by the diagram, Fig. 3, which illustrates the general ar-
rangement pf a type of aeroplane motor that is extensively used.
With this form of motor, as the cylinders revolve about the
stationary crank, the pistons move in and out relative to the
cylinders, the same as though the latter were stationary and the
crank revolved. The cylinders form the flywheel and drive
the propeller and, as they revolve rapidly, the temperature
is reduced sufficiently by air cooling and without any auxiliary
cooling device. The gyroscopic effect of the rotating cylinders
also serves to steady the aeroplane in its flight. The valves for
controlling the admission of the gas and the exhaust are actuated
by a single cam and are closed by the outward movements result-
ing from centrifugal force. The higher the speed of the motor,
the greater the centrifugal force and also the greater the necessity
for a rapid closing of the valves.
CyUnders which Revolve Within an Eccentric Track. — The
design of the aeroplane motor shown in Fig. 4 illustrates another
method of obtaining a rectilinear motion of a piston relative to
a cylinder. The six cylinders are formed in one solid casting and
rotate within eccentric annular tracks A which extend around
both side walls of the casing. The pistons are carried by trun-
nions supported by ball bearings B. There are two of these
ball bearings for each piston, and they are free to run on the
annidar tracks A. When the cylinder casting revolves, it
carries with it the pistons and the ball bearings; as the center
of tracks A is offset relative to the axis about which the cylinder
rotates, the pistons are given an inward and outward motion
relative to the cylinders. The pins upon which the pistons are
moimted carry guide shoes that reciprocate in slots formed in
the cylinder walls for about half the length of the cylinder.
These guide shoes are intended to steady the action of the piston
and reduce wear on the cylinders.
The action of the motor wiU be more apparent by noting the
ROTARY AND RECTILINEAR MOTIONS 67
position of each piston relative to its cylinder. For instance,
the piston shown at C is at the inner end of its stroke as it is
opposite that part of the nnniilnr tracks which is nearest to the
axis about which the cylinders revolve. When the motor is in
operation, the charge of compressed gas is fired at approximately
this position, and then, as the cylinders revolve in a clockwise
direction, the piston moves outward from this point while the
ignited charge of gas is expanding, as indicated by the arrow
extending between radial lines 3 and 3. This charge is then
exhausted and a new charge is drawn in and compressed as the
cylinder and piston pass between radial lines i and 2, as indicated
in the illustration.
Rack and Gear Combination. — A rack connecting with a
spur gear or pinion is commonly used to change rotary motion
68 MECHANICAL MOVEMENTS
to rectilinear motion, or vice versa. Ordinarily, the spur gear
is the driver, but this order is sometimes reversed and a rack is
given a reciprocating movement for revolving a pinion. The
driving mechanism of a planer, shown in Fig. 5, Chap. IV,
represents a typical example of a rack and gear combination.
The rack L is attached to the bed or platen of the planer, and
meshing with this rack is a large gear Id, kuown as a " bull-
wheel," which recdves its rotary motion through a train of gear-
ing cowiecting with a shaft upon which the driving pulleys B
^
jtei
-« Y\
^ k
m]h
m»
^Vn
1
n|. 5. Crank UKhftniun fol DonbUnf tha Stroks
are mounted. These pulleys are driven by open and cross belts
which are alternately shifted from loose pulleys to a central
pulley which is keyed to the shaft. TTie point of reversal is
controlled by dogs K which may be adjusted aloi^ the side of the
table for varjdng the length of the stroke. The planer table
rests in V-shaped ways or guiding surfaces which cause it to
move in a straight line.
Crank Mechanism for Doubling the Stroke. — A crank and
Hnk medianism is shown in Fig. 5 which makes it possible to
ROTARY AND RECTILINEAR MOTIONS 69
obtain a rectilinear motion approximately equal to twice the
throw of the driving crank. This mechanism is shown applied
to an air pmnp for use on automobiles, either for the inflation
of tires or in connection with engine starting apparatus requiring
compressed air. The crank proper is of the center type with a
bearing on each side. The connecting-rod is attached to the
yoke A which is moimted on the main crankpin. The opposite
end of this yoke is pivoted to link B which is suspended from a
pin attached to the compressor casing. As the crankshaft ro-
tates, this link oscillates and so controls the position of yoke A
that the stroke of the piston is approximately doubled. The
view to the left shows the piston at the lower end of its stroke.
As the crank turns in a counter-clockwise direction, link B
swings to the right so that the right-hand end of yoke A is
forced downward and the left-hand end upward, as indicated
by the right-hand illustration which shows the piston at the
top of its stroke. The advantage of this crank mechanism is
that it enables a comparatively large capacity to be obtained
from a small compact pump.
Crank-driven Pinion Engaging Upper and Lower Racks. —
Another method of doubling the stroke when a crank of relatively
small size is necessary, owing to a limited space, or desirable, in
order to obtain a compact design, is by means of a fixed and a
movable rack having a crank-driven pinion interposed between
them. The pinion is pivoted to the end of the crank connecting-
rod so that it is free to roll along the stationary rack when the
crank revolves. As the result of this rolling movement of the
pinion, the movable rack is given a rectilinear motion equal to
twice the stroke of the crank, or twice the diameter of the path
described by the crankpin. This mechanism has been used for
driving the beds of cylinder presses.
A modification of the plain gear-driven crank is shown in Fig.
6 which illustrates the bed motion of a two-revolution pony press.
The driving and driven gears A and B are of the elliptical form
in order to compensate for the motion derived from a crank ro-
tating at imiform velocity. The driven gear B revolves the
crank which, in turn, transmits motion to pinion C by means of
70
MECHANICAL MOVEMENTS
I
the connecting-rod shown. This pinion is rolled in first one
direction and then the other along the stationary rack D, and
imparts a rectilinear motion to rack E and the press bed. The
press bed moves a distance equal to twice the distance that the
axis of gear C moves, or four times the radius of the dnving crank.
The elliptical gears are so proportioned and located relative to
the crank as to give a more uniform motion to the press bed than
could be obtained with a crank rotating at uniform velocity.
With an ordinary crank, whatever part is given a rectilinear
motion starts from a state of rest, and the velocity gradually
increases toward the center of the stroke and then decreases
until it again becomes zero at the opposite end of the stroke.
Fig. 6. Cnmk-driTeii Pinion •ngaging StttionAry and MoTaUe Rack
for Doubling Stroke
With the elliptical gearing shown, as the pinion C approaches
either end of its stroke and the crank advances toward the
" dead-center " position, the long side or radius of the driving
gear comes into engagement with the driven gear and increases
its velocity, and also the velocity of the crank. As the return
stroke begins, the velocity of the driven gear and crank gradually
decreases, because the radius of the working side of the driving
gear gradually diminishes; the result is that, when the crank is
at right angles to the line along which the axis of pinion C moves
and is in a position to impart the maximimi velocity to pinion
C, the speed of the crank is slowest, because it is then driven by
the shortest radius of the driving gear. As the crank moves
ROTARY AND RECTILINEAR MOTIONS
71
away from this central position at right angles to the center-line
of motion, the speed is gradually accelerated again so that pinion
C does not slow down as it would with a crank rotating at uni-
form speed. The reversal of the heavy press bed is assisted by
means of '^ air springs '' or cushions, the same as on cylinder
presses in general. This mechanism is intended for small presses.
Single- and Double-stroke Toggle Mechanism. — The toggle
mechanism previously described in connection with Fig. 11,
Chapter I, is often utilized for changing a rotary to a rectilinear
motion, especially when a powerful squeezing action is required.
Fig. 7. Diagrams. thowinc Action of Single- and Double-stroke Toggle
Mechanism
An arrangement of this kind is used on some cold-heading ma-
chines, such as are employed for forming heads on bolts, rivets,
etc. The diagram A, Fig. 7, illustrates a crank-driven toggle
mechanism which gives a forward and return stroke for each
revolution of the crank. When the links of the toggle are
straightened, as indicated by the heavy lines, the punch which
forms the head on the work is at the end of its stroke, and it is
then withdrawn as the crank makes another half revolution.
This form of drive as applied to a cold-header is known as the
" two-cycle type," because two revolutions of the crankshaft
5A
73 MECHANICAL MOVEMENTS
are necessary to complete a rivet or bolt requiring two blows of
the punch.
Many classes of work cannot be done satisfactorily with a
single stroke, owing to the amoimt of metal that must be upset
in order to form the head of a bolt or rivet. A design of
toggle mechanism which is extensively used on double-stroke
machines is illustrated by the diagram B, Fig. 7. With this
arrangement, two blows are obtained for each revolution
of the cc^mk connecting with the toggle. The location of
the crank is such that the links of the toggle are straightened
before the crank has made one-half revolution; consequently,
when the half revolution is completed, the links of the toggle
are carried beyond the center-line, as indicated by the diagram,
which causes the ram and die to be withdrawn preparatory
to making a second stroke. As the crank continues to re-
volve and the toggle is again straightened, a second working
stroke is made and then the ram and die are withdrawn; this
cycle of operations is repeated for each revolution of the crank.
The two strokes which are obtained for each revolution of the
crank may be of unequal length, as shown by the diagram, or of
equal length, depending upon the position of the crank relative
to the line of the straightened toggle. A cold-header having this
form of drive is known as a '' one-cycle " machine, since it will
impart two blows to the work for each revolution of the crank-
shaft.
Toggle Mechanism of Drawing Press. — One way of arranging
the toggle mechanism of a drawing press is illustrated in Fig.
8. When a press of this kind is in operation, the sheet of metal
to be drawn is pressed firmly down upon the die face by a blank-
holder, while the drawing pimch forces the metal into or through
the die. The blank-holder prevents the sheet stock from buck-
ling, and it should remain in the downward position while the
drawing punch is at work. Toggle mechanisms are employed on
large drawing presses to operate the blank-holder. The toggle
mechanism illustrated in Fig. 8 is operated from crank H on
the main crankshaft. This crank connects with link Aj the
lower end of which is attached to yoke B. The upper end of
ROTARY AND RECTILINEAR MOTIONS
73
yoke B is guided by link E, which is pivoted to the frame of the
press, and the lower end is guided by finother link C pivoted at
D. These two links C and D compel the yoke to move in prac-
tically a vertical strai^t line when it is traversed by the action of
crank H. Attached to the yoke are two other links connecting
with beOcranks F and G which, in turn, are pivoted to the side
of the press frame. The outer arms of these bellcranks are
connected by long links or rods mth cranks on the ends of two
Fi(. S. Appllcalioii of Toula HMluuiism ti
I Dniriiw PrwB
rockshaits J and K, at the front and rear of the press, respectively.
From these rockshafts, motion is transmitted to the blank-'
bolder by means of arms L and links M. The dotted lines on one
^de indicate the action of the rockshaft and its connecting link
when in the extreme upper position. The bellcrank levers F
and G, together with the links connectii^ them with the rock-
shafts J and K, form a toggle mechanism which is straightened
out at the same time that the driving crank E is passing its
74 MECHANICAL MOVEMENTS
center and the arms L and links Jf are in line. This central or
straight-line position for the toggles occurs while the blank is
being held for the drawing operations; the blank-holder dwells or
remains down long enough to enable the drawing pimch to com-
plete its work before the sheet metal stock is released by the
blank-holder. The slide to which the drawing punch is at-
tached receives its motion from the main crankshaft.
Reversing Screw. — When a relatively slow but powerful
movement is required, a reversing screw may be employed for
changing rotary motion to rectilinear motion. Broaching ma-
chines of the horizontal type, which operate by pulling long
broaches through holes in castings and forgings, are equipped with
the reversing screw type of drive. As the broaching is done by
a series of cutting teeth which gradually increase in size in order
to produce a hole of the required shape progressively, consider-
able power is required for pulling the broach through the work,
especially when cutting hard tough metal. Therefore, the draw-
head to which the broach is attached is given a rectilinear move-
ment by means of a screw which does not revolve but is moved
in a lengthwise direction by a nut. The screw passes through
this nut which is held against endwise movement, and,, with one
design, is rotated from the driving shaft through suitable gearing.
This gearing is so proportioned that a comparatively slow motion
is imparted to the nut and screw for the cutting stroke and a
faster movement for the return or idle stroke. The nut which
engages the screw is alternately connected with these two com-
binations of gearing by means of a dutch that is shifted by ad-
justable tappets or dogs that control the length of the stroke.
Some of the smaller broaching machines intended for lighter
work have belt pulleys that revolve about the screw in opposite
'directions, and are alternately engaged with a central clutch
which transmits motion to the draw nut on the screw.
Worm and Rack Drive. — A worm or short screw which meshes
with a rack represents another form of reversing screw drive.
This arrangement, which is often referred to as the " spiral gear,"
or " Sellers " drive, has been applied to a limited extent to
planers for transmitting motion from the driving shaft to the
ROTARY AND RECTILINEAR MOTIONS 75
planer table. Motion is transmitted from the driving shaft,
through bevel gears to a shaft which extends under the bed diag-
onally and carries the spiral pinion or worm that meshes with
a rack attached to the under side of the table. The diagonal
position of the worm-shaft or its angle relative to the rack is
such that the meshing or working side of the worm will be in
alignment with the rack teeth. Smoothness of action is the
principal advantage claimed for the worm and rack drive.
Double Rack and Shifting Gear. — If a gear rotating continu-
ously in one direction is located between parallel racks, so that
it can be engaged with first one rack and then the other, these
racks will be moved in opposite directions. For instance, if
the top side of the gear moves one rack to the right, the lower
side will move the other rack toward the left. Some flat-bed
printing presses are equipped with this double-rack and shift-
ing-gear mechanism for driving the bed in first one direction
and then the other. With mechanisms of this class, one rack is
first traversed past the gear; when the gear and rack are entirely
disengaged, the gear is shifted axially far enough to align it with
the other rack. While this shifting movement takes place, the
motion of the bed is arrested, and it is reversed by some auxiliary
mechanism which moves it far enough to bring the other rack
into engagement with the driving gear. Press bed motions of
this general type differ principally in regard to the method of
moving the press bed at the ends of the stroke, at the time when
the driving gear and rack are disengaged.
Crank Type of Reversal for Press Bed Motion. — An ingenious
mechanism of the double-rack and shifting-gear type is shown
diagrammatically in Fig. 9. This design is applied to Miehle
flat-bed or cylinder presses. In the operation of presses of this
general type, the sheets to be printed are carried aroimd by a
revolving cylinder K so that contact is made with a flat form on
the press bed which moves horizontally beneath the cylinder.
This cylinder makes one revolution during the printing stroke
and a second revolution while the press bed is being returned.
In order to avoid contact between the cylinder and the bed or
form during the return stroke, the cylinder is raised slightly by
76 UECHANICAL MOVEMENTS
a suitable mechanism. The rotation of the cylinder is continuous
in one direction and it is imperative that the cylinder and press
bed move exactly in unison. The circumferential velocity of
the cylinder should equal the linear velocity of the bed, because
any relative motion would cause slurring on the printed sheet and
it would be iiiq>ossible to obtain sharp clean-cut impressions.
As the cylinder revolves at a uniform speed, obviously the mecha-
nism for driving the bed must be designed to give a imiform
motion while the impression is being made. In order to prop-
erly time the motion of the cylinder and bed, the cylinder is
connected by gearing and suitable shafts with gear A, which
transmits motion to the bed; therefore, the press bed motion
must be designed to reverse the movement of the bed without
reversing the motion of gear A, since this gear rotates in uni-
son with the cylinder or continuously in one direction.
This driving gear A is mounted between parallel racks B and
C, both of which are attached to and travel with the bed. The
distance between the pitch lines of these racks corresponds to
the pitdi diameter of the driving gear A. The racks are not
ROTARY AND RECTILINEAR MOTIONS ^^
directly in line, but are offset as shown by the end view, so that,
when the gear is in mesh with one rack, it will clear the other one.
The lateral movement of gear A for aligning it alternately with
racks B and C is derived from cam J9, which transmits motion
by means of a lever and yoke engaging the gear hub.
When the press is in operation, the bed is moved in one direc-
tion by the engagement of gear A with rack B and in the opposite
direction by meshing gear A with rack C If gear A is revolving
in a clockwise direction while in mesh with rack C, the latter
and the press bed (the motion of which is constrained by guides)
will move toward the left. When the press is in motion, this
movement toward the left continues until the rack is entirely
out of mesh with gear A ; just before the disengagement of gear
A and rack C, the crankpin £, which is provided with rollers,
comes around and enters between the parallel faces of a ^ed
reversing shoe F and a swinging or movable reversing shoe G.
The fixed shoe is rigidly attached to the press bed and rack
frame, whereas the movable shoe is pivoted and free to swivel.
This swinging reversing shoe has a pin on its lower side (not
shown) which engages a slot or cam that controls its swinging
movements. As soon as rack C has moved far enough to the left
for shoe G to clear the crankpin, the cam swings the shoe inward
so that crankpin E is confined temporarily between the faces of
shoes G and F, which form a vertical guide or slot. As the crank-
pin passes its lowest position and begins to move upward, the
roller on it bears against the face of G and '' picks up " the load
as gear A moves out of mesh with rack C.
When crankpin E arrives at the position shown in the illus-
tration, the motion of the press bed is reversed, because a roller
on the crankpin then engages the face of shoe F thus moving
the driven member toward the right. The motion continues to
be derived from the crank independently of the disengaged
gear and rack, imtil the crankpin has passed the top quarter or
highest position; then gear A enters the upper rack B and the
motion is transmitted entirely through the gear and rack imtil
the crank again comes into action at the opposite end of the
stn^e. At this end, the crankpin is again confined between a
MECHANICAL MOVEMENTS
ROTARY AND RECTILINEAR MOTIONS 79
swinging shoe H and a fixed shoe /. After rack B has moved
out of engagement with gear A , crankpin £, which is now in its
highest position, comes into contact with shoe B and continues
the movement toward the right while making a quarter turn,
and then reverses the motion as it swings downward against
the face of shoe /. While crankpin E is controlling the motion
and gear A is entirely out of mesh, this gear is shifted by cam D
out of line with the rack B which it just left, and into line with
rackC.
An ingenious featute of this mechanism lies in the provision
of two rollers for crankpin E and locating the fixed and swinging
shoes in different vertical planes. With this arrangement, each
roller is free to revolve in opposite directions as the crankpin
moves along the vertical faces of the shoes. The momentum of
the bed is gradually checked at the points of reversal, by air
cushions or " air springs." A plunger enters a cylinder at each
end of the stroke and air is compressed to arrest the movement,
and, by expanding, this air assists in accelerating the heavy bed
when its motion is reversed. Provision is made for regulating
the air cushion or pressure according to the speed of the press.
The air cushion is a feature common to flat-bed or cylinder presses
in general.
Reversal of Motion by Reciprocating Pinions. — The mecha-
nism illustrated in Fig. 10 is similar, in some respects, to the press
bed motion just described, in that the parallel-rack and shifting-
gear construction is employed. The method of operating the
press bed at the ends of the stroke, however, is entirely different
from that shown in Fig. 9, as reciprocating pinions are used to
pick up the load and reverse the motion. The uniform motion
of the bed is derived from pinion A which is constantly in mesh
with gear D carried on the main driving shaft. Pinion A is
located between parallel racks B and C which are attached to the
press bed. These racks are offset, as in the design shown in
Fig. 9, so that the pinion will clear one rack while in engagement
with the other one. The shifting of the pinion is controlled by
cam E which transmits motion to the pinion by means of lever
P. The pinions for reversing the motion of the bed are located
8o BffiCHANICAL MOVEMENTS
at G and H. The shafts upon which these pinions are mounted
are connected to a heavy yoke / which has a vertical slot or
groove in which a swiveling block attached to the crank K
operates. This crank is rotated by the main driving shaft, and
transmits to yoke / and pinions G and H a rectilinear motion
equal to the throw of the crank. This is a harmonic motion, as
yoke / and the sliding crank-block operate on the same prin-
ciple as the well-known Scotch yoke. The outer ends of yoke /
are supported by horizontal guides, and the pinions G and H
are constantly in mesh with short racks M and L along which
the pinions roll as the crank moves them to and fro.
The action of the mechanism will be apparent by considering
the various movements which occur during a forward and return
stroke. The side view of the assembled mechanism shows the
press bed in the position where the driving pinion A has just
come into engagement with the lower rack C As this pinion
rotates in a clockwise direction, the bed will be driven to the
left with a imiform motion. (The relative positions of pinion
A and racks B and C are clearly shown by the end view.) When
the bed has moved so far to the left that pinion A is about to
roll out of mesh at the right-hand end of rack C, pinion G, which,
meanwhile, has been moving along its rack J/, comes into en-
gagement with another short rack P (see also end view) attached
to the bed. To insure the proper engagement of pinion G with
rack P, the action of crank K relative to the motion of the bed
is so timed that pinion G is rolling to the left when rack P which
is also moving to the left comes into engagement with it. As
pinion A leaves rack C, pinion G, which is then in mesh with P,
continues the movement of the bed toward the left imtil crank K
is in the position shown by the diagram in the lower left-hand
comer of the illustration, which represents the end of the printing
stroke. Further rotation of crank K in the direction indicated
by the arrow causes a reversal of the rolling motion of pinion G
and starts the press bed toward the right, motion being trans-
mitted from G to rack P. While this reversal of movement
occurs, pinion A is being shifted by cam E into alignment with
the upper rack B.
ROTARY AND RECTILINEAR MOTIONS 8l
When crank K has moved a quarter revolution from the
position it occupies at the extreme end of the stroke, pinion A
comes into mesh with the upper rack B and the short rack P
leaves pinion G. The view at the lower right-hand comer of
Fig. lo shows pinion A about to enter rack B and pinion G leaving
rack P. As the rectilinear motion of yoke / is harmonic, the
movement of the bed is uniformly retarded as it approaches the
point of reversal and is then accelerated imtil pinion A en-
gages its rack, when the motion is uniform. When pinion A
enters at the end of either rack, the velocity of the movement
derived from crank K and the reciprocating pinion corresponds
to the velocity obtained from the driving pinion A , so that there
is no abrupt change of motion as the load is being transferred
from the reversing pinion to the driving pinion A . As the press
bed approaches the opposite end of its stroke, pinion H comes
into engagement with rack Q and continues the movement for
a short distance each side of the point of reversal or while pinion
A is out of mesh with either rack and is 6eing shifted, the action
being the same as previously described.
Napier Motion for Press Beds. — When a gear or pinion is
in mesh with a single rack and rotates in one position, obviously
both the gear and rack must reverse their direction of motion
at the end of each stroke. The gear, however, may rotate
continuously in one direction if it is arranged to engage the upper
and lower sides of a rack designed especially to permit such
engagement. A mechanism of this type, known as the Napier
motion and also as ^' mangle gearing," has been extensively used
for imparting a rectilinear motion to the tables of flat-bed
printing presses. The principle of the Napier motion will be
apparent by referring to Fig. ii. The rack A is attached to a
frame B which is secured to the table of the printing press.
The rack teeth are of such a form that the gear C may mesh
with the rack on either the upper or lower sides. The shaft J9,
upon which the gear C is mounted, is rotated through a imiversal
coupUng, which permits it to swing in a vertical plane so that
the gear may pass from the upper side of the rack to the lower
side, and vice versa. The gear shaft is made to mdve in a vertical
8a MECHANICAL MOVEMENTS
plane by a. stationary slotted guide E having a vertical slot that
is engaged by a sliding block, mounted on the shaft. Spherical-
shaped rollers F are mounted at each end of the rack, and the
gear has a socket or spherical depression formed in it for engag-
ing the rollers, each time the gear moves aroimd the end of the
rack when passing from one side to the other. Opposite each
end of the rack, there are guide plates G having curved surfaces
which are concaitric with the rollers at the ends of the rack.
Tit. II. Th* Ila^w Motion for flat-bod Mntlng Froi*
The gear C also carries a roller H which engages these curved
guides as the gear moves upward or downward at the points of
reversal.
The action of the mechanism is as follows: If the gear is on the
upper side of the rack, as shown in the illustradon, and it is re-
volving to the left or counter-clockwise, the rack will be driven
to the right with a velocity equal to the motion at the pitch
drcle of the gear. As soon as the gear engages the roller F on
the end of the rack, it begins to move downward in a vertical
plane, because its motion is constrained by guide E. When
the gear is in mid-position so that its axis coincides with the
ROTARY AND RECTILINEAR MOTIONS 83
center-line of the rack, it will have made a quarter turn, thus
moving the center of roller P farther to the right, a distance equal
to the radius of the pitch circle. Farther movement of the
gear downward causes the rack to reverse and move toward
the left; the gear then operates on the imder side of the rack
until the roller at the right-hand end of the rack is engaged, when
the upward movement of the gear takes place and there is
another reversal of motion.
The total length of the stroke is equal to the distance between
the centers of the rollers on the rack, plus the pitch diameter of
the gear. The length of the rack must equal the pitch cir-
cumference of the gear or some multiple of it, so that the rollers
at the end will engage the socket or depression in the gear at the
points of reversal. If a gear is used having two roller spaces
located 180 degrees apart, the length of the rack or the center-to
center distance between the rollers may be some multiple of
half the pitch circumference. The teeth on each side of the
rack incline from the horizontal at the same angle as the gear
ads when in its upper and lower positions, to obtain a full con-
tact of the gear teeth. The gear also has a plain cylindrical
shoulder on the inner side, which rolls upon a plane surface /
at the base of the rack, to give a smoother action than would be
obtained from a gear supported entirely by tooth contact. This
arrangement of gearing imparts a uniform motion to the press
table, excepting any variable movement resulting from a uni-
versal joint, and gives a gradual reversal of motion at the ends
of the stroke. The Napier motion may be designed for any
length of stroke, although the stroke remains constant, as there
is no way of making an adjustment.
Variable Reciprocating Motion. — The fly frames used in the
manufacture of cotton goods are equipped with a mechanism
for traversing the rovings or slightly twisted slivers of cotton
as they pass between the rolls of the fly frame, which is used to
make the rovings more slender and give them a twist. The
reason for traversing the roving as it passes between a steel and a
leather-covered roll is to prevent wearing the leather covering
at one place. On some machines, this reciprocating or traversing
84 ICECHANICAL MOVEMENTS
motioa is obtained frcon a crank or a cam. This ^mple ar-
rangement distributes the wear but, if the length of traverse
is uniform, the tendency is for the leather covering to wear the
most at the pcnnts of reversal. In order to distribute the wear
more evenly, the mechanism ^own in Fig. la was designed.
With this arrangement, the length of traverse gradually in-
creases until it reaches a maximum and then decreases until
the shortest length of traverse is obtained; the gradual in-
creasing and decrea^g of the stroke are then repeated.
The diagram A illustrates graphically the action obUuned with
a crank motion, and diagram B illustrates the variable stn^e
ni. I
derived from the mechanism to be described. The guide-bar
C, which extends the full length of the rolls, has small holes op-
posite each roll section through which the rovings pass, and it
is this guide-bar which receives the reciprocating motion. The
automatic variation of the traversing movement is derived
from two eccentrics D and E, which revolve at different rates
of speed. These eccentrics are formed on the hubs of gears P
and G, which are adjacent to each other, and are both driven
by one worm H as shown by the end view. The motion of the
ROTARY AND RECTILINEAR MOTIONS 85
eccentrics is transmitted to guide-bar C through rods / and K
and the bracket L. One of the gears meshing with worm H
has one more tooth than the other, which causes the gears to
rotate at a varying speed. The result is that the eccentrics
formed on the two gear hubs are continually changing their
position relative to each other, which automatically varies the
length of traverse for guide-bar C For instance, at one period
during the cycle of movements, both eccentrics will move rods
/ and K in the same direction, and, at another period, one ec-
centric rod will be moving backward while the other is moving
forward, thus reducing the stroke of the guide-bar. The connec-
tions between the eccentric rods and the bracket are adjustable;
an adjustment is also provided where the bracket is attached
to the guide-bar, so that the maximum traversing movement
may be varied.
Reciprocating Motion from Epicyclic Gearing. — What is
known as a " wabble " gear is used on mowing machines for im-
parting a rapid reciprocating motion to the cutter bar. The
arrangement of this gearing and the other parts of the mecha-
nism is shown in Fig. 13. The internal gear C is so mounted that
it cannot rotate but is free to oscillate on a universal gimbal
joint D, The gear B which meshes with one side of C is moimted
on the main shaft which connects with the driving wheels. The
frame / is rigidly connected to gear C and is pivoted in the re-
volving part H. By this means, gear C is given an oscillating or
wabbling movement, so that the entire gear describes or follows
a circular path. This circular motion causes the teeth of gear
C to mesh with those of gear B all around the circumference for
each rotation of the part H, This part H turns on a fixed shaft
E and acts somewhat as a flywheel to maintain steadiness of
action besides constraining gear C to follow a circular path.
In this case, gear C has forty-eight teeth and gear B, forty-six
teeth; therefore, if gear B were free to turn on its shaft, it would
be displaced two teeth for each rotation of part H or each time
gear C completed a circular movement. Consequently, twenty-
three revolutions of part H and a like nimiber of oscillations of
frame / would be required to turn B one revolution. Tracing
86
MECHANICAL MOVEMENTS
the motion in the opposite direction, it will be noted that one
rotation of gear B, which acts as the driver when the mechanism
is in operation, will cause twenty-three oscillations or wabbling
movements of gear C and a like niunber of rotations for part H.
The frame / is connected to the cutter bar by the ball joint at Kj
so that one turn of the driving wheels which are mounted on shaft
A will traverse the cutter bar twenty-three times. This com-
bination of gearing makes it possible to use a gear B having only
two teeth less than the niunber in gear C, which would be prac-
tically impossible with gears having teeth parallel to the axis of
Fiff. Z3. Epicydic or *' Wabble** Oearing for Produdnc a Rapid
Redprocatiiig Motion
the shaft. With the usual forms of epicyclic gearing, in which a
high velocity ratio is obtained, the efficiency of transmission is
low on accoimt of the excessive tooth friction, but, in this case,
the efficiency is said to be nearly as high as that obtained with
a train of spur gears having the same velocity ratio.
~ Epicyclic Gear and Crank Combination. — The mechanism
illustrated in Fig. 14 is applied to an electric coal-puncher. One
of the difficulties encountered in designing coal-punchers, ex-
cepting the solenoid type, has been in changing the rotation of the
motor into a reciprocating motion for the drill. If the blow is
ROTARY AND RECTILINEAR MOTIONS 87
directly dependent upon the motor, the latter causes trouble,
owing to the vibrations and strains incident to the blows of the
pick, and if springs are utiUzed they are Uable to break. Types
having separate motors and flexible shaft connections have also
been tried in order to avoid some of these difficulties, but com-
plications were introduced which at least partially offset the
benefits derived.
The coal-puncher of which the mechanism shown in Fig. 14
forms a part uses both compressed air and electricity. Power for
operating the coal-pimcher is obtained from a motor and the
compressed air gives the blow. There is no direct connection
between the motor and striking pick, so that the vibrations are
cushioned. The illustration shows the mechanical means by
which the rotation of the motor armature is changed to a re-
ciprocating motion for driving the air-compressing piston. A
small pinion attached to the armature shaft engages a large driv-
ing gear (not shown) which has a solid web carrying the stud d
upon which the crank pinion e is moimted. This crank pinion
has 33 teeth and meshes with internal gear / which is rigidly
fastened to the frame of the machine and is concentric with the
main driving gear which surroimds it. The pitch diameter of the
crank pinion e is just one-half that of the internal gear/ which has
66 teeth. The crankpin g is attached to the pinion e and engages
cross-head h which is moimted in guides and receives a rectilinear
motion as pinion e revolves around the internal gear. Attached
to the cross-head, there is a piston-rod a which enters the air-
compressing cylinder and has a piston secured to its forward end.
When the main driving gear is revolved by the motor, the
crank pinion stud d describes a circular path, as indicated by the
arrows, thus causing pinion e to revolve about the stud and aroimd
the internal gear. When the pin d has moved one-quarter of a
revolution, it will be in the position shown by the illustration to
the right, and pin g attached to cross-head h will be in the center
of the internal gear. At the completion of one-half a revolution,
pin g will have moved in a straight Une a distance equal to the
pitch diameter of the internal gear, and will be at the right-
hand end of its stroke. Similarly, at three-quarters of a
6a
S8 MECHANICAL MOVEMENTS
revolution, the pin will again be in mid-position, and at the
a)mpletion of a full revolution, it will be at the starting point,
as shown by the view to the left. In this way, the crank
pinion, as it revolves around the internal gear, transmits to
pin g and the attached cross-head h a rectilinear forward and
backward movement The cross-head is mounted in guides,
1 which Rftdpro-
but pin g would follow a straight line even though guides were
not used.
The way in which the air is compressed and utilized to impel
the pick-carrying piston forward, all in one cylinder, will be
described. A sectional view of the air cylinder is shown at C in
Fig. 14. The air cylinder contains two pbtoos j and k. The
rear piston/ is attached to rod a connecting with the cross-head.
The front piston it has no cottnecti(m with/, but it is attached to
ROTARY AND RECTILINEAR MOTIONS 89
the drill or pick socket by the rod /: The first stroke of the pick
is purely mechanical. The rear piston 7 moves forward, pushing
the front piston k. During this stroke, air is drawn mto the
cylinder behind the piston j\ through the main inlet valve 0.
On the return stroke, this air is compressed and at the same time
the front piston k is drawn back by the partial vacuum created
by the piston y, air being admitted in front of k through a port p.
When the return stroke is completed, the rear piston has passed
the by-pass opening q in the cylinder, which opening is between
the two pistons at the time. This allows the compressed air
to force the front piston forward, exactly as in any compressed
air drill. In this way, the first real stroke of the machine is
made; that is, the mechanical stroke previously mentioned is
made only once or when starting from rest. On the forward
stroke of the piston k, the air in front escapes through the port
Py but after the piston has passed and, therefore, closed this
port, a sufficient amount of air remains to cushion the blow and
prevent damage to the front cylinder head. This cushion of
air may leak somewhat, and to prevent an insufficient supply
remaining, which would have the effect of creating a partial
vacuum in this space and holding the piston on the return stroke,
a small inlet valve r is placed in the forward part of the cylinder.
This allows air to flow in under these conditions before the open
port is passed. When the front piston k has made its forward
stroke, the rear piston follows, mechanically driven as before,
and would compress the air which has just made the stroke of
the front piston, were it not for the so-called vacuum valve s
which allows all air between the pistons above a certain pressure
to escape to the atmosphere. This action prevents the two piston
faces from coming together.
A mechanism operating on the same general principle as the
one shown in Fig. 14 has been applied to printing presses of the
flat-bed t)^, for imparting a rectilinear motion to the bed.
This mechanism has the advantage of giving a long, gradually
increasing and decreasing motion with a short crank and without
the use of a connecting-rod or a slotted cross-head; therefore, it
can be applied to some classes of mechanisms when there would
90 JjECHANICAL U0VI3IENTS
not be sufficient room for a connecting-rod or in preference to
the slotted yoke, because of mechanical objections to the latter.
In designing this mechanism, the center of pin g should exactly
coincide with the pitch circle of the internal gear; then, if the
internal gear has twice as many teeth as the revolving gear, the
center of g will move in a straight line, even though its motion is
not constrained by means of guides.
Shifting Reciprocating Part from Working Position. -- The
machine shown in Fig. 15 is used in a certain branch of the
leather business to press a leather product between a pair of
dies ^ by a series of reciprocating motions given to the lower die,
which is afterwards withdrawn to the " open position " shown at
the right, to allow the removal and insertion of the work. The
ROTARY AND RECTILINEAR MOTIONS 91
mechanism to be described serves to automatically locate the
lower die in the open position when the driving belt is shifted to
the loose pulley, and into the '' working " position as eccentric y,
which imparts motion to ram G, is rotated by shifting the belt
to the tight pulley. The shaft to which this eccentric is keyed
turns in the direction shown by the arrow. The upper half of
the eccentric strap is pivoted to the connecting-rod at D and
carries an arm H to which is attached the long spring B. If
there were nothing to prevent it, the spring would evidently tend
to pull the joint D over, as shown by the right-hand view. In
this position, with the belt on the loose pulley, the machine is
ready to receive the work. The lugs K are attached to a leather
band friction, bearing on an extension of the eccentric siurface,
and shown in dotted lines behind the eccentric strap. A finger
screwed to the lower half of the strap and projecting between
the lugs serves to keep the brake in position. If the machine is
started by throwing the belt onto the tight pulley, the brake
grips the eccentric with sufficient force to overcome the slight
tension of spring B, and joint D is moved back to the central
working position, where buffer E has reached its seat on the
connecting-rod. As the shaft continues to turn, the brake slips
on its seat and the eccentric gives the desired movement to the
ram. When the operation is completed, the belt is shifted to the
loose pulley, and spring B turns the shaft, eccentric, and strap
backward imtil the machine is again in the open position with the
ram lowered to allow a change of work.
Rectilinear Motion from Revolving Pawls. — The mechanism
for driving a conveyor is shown in Fig. 16. This conveyor con-
sists of a pair of endless chains between which the conveyor
buckets are carried. These buckets are himg on pivots, so that
they are kept in an upright position by gravity. The chains
are equipped with wheels which run on tracks. The chains and
buckets are propelled along the tracks as indicated by the arrow,
by a system of rotating pawls which receive their motion from a
large gear D. Each pawl, in turn, engages one of a series of
pins on the chain and, after having pushed the conveyor ahead,
the pawl is raised by cam C and the next pawl repeats the oper-
92
MECHANICAL MOVEMENTS
ation. When a pawl, as at i4 , is passing through the lowest arc of
its travel, the conveyor is propelled forward. The pawl shown
at B has passed the lowest point, and it gradually lags behind the
conveyor, so that the end of the pawl is readily lifted out of
engagement without interference. As will be seen, the inner
end of pawl jB is in contact with the cam surface which controls
its position.
Adjustable RectiUnear Motion. — The mechanism shown in
Fig. 17 is for traversing the table of a grinding machine along the
Fig. z6. Arrtncemoiit for Obtaining Rectilinear Motion from RevoMig
Pawia
bed. This machine, which is of a comparatively small size, h
intended for internal and external grinding operations; thus it
is necessary to provide means for readily changing the stroke of
the table. "With the mechanism illustrated, any variation in
stroke can be obtained from zero to the maximum while the
machine is operating. The motion for the table is derived from
a heart-shaped cam C mounted on a vertical shaft which is driven
through a speed-changing mechanism. This cam engages a roll
attached to the lower side of an oscillating arm A having on its
upper side another roll B which can be adjusted relative to the
ROTARY AND EECTILINEAR MOTIONS 93
pivot P abcput which the arm oscillates. This upper roll operates
between the paraJlel faces of yoke D, and the latter is attached
to a tod E located beneath the table of the machine. On the
under ^e of the table and extending throughout its entire length
is a dovetailed slide-way in which is fitted a block that is attached
to and moves with the reciprocating rod E. By means of &
suitable lever, this block which fits into the dovetailed slide-way,
can be clamped in various positions for changing the location of
the table. The action of the mechanism is as follows: When the
cam C is rotating, arm A oscillates about pivot P and, through
roller B, transmits a rectilinear motion to yoke D, rod E, and the
table. The length of this movement or stroke is governed by
the portion of roll B relative to pivot P, wMch may be varied
by means of a screw that is connected through a universal joint
with a shaft upon which handwheel H is mounted. When roll
B is moved inward until it is directly over pivot P, no move-
ment will be imparted to yoke D or the table.
Motion of Drop-hammer Lifting Mechanism. — The drop-
hammers used for making drop-forgings are so designed that the
hammer head is raised by rolls which run in opposite directions
9*
MECHANICAL MOVEMENTS
aod bear against oppo^te ddes of a board attached to tlie ham-
mer head. Front aod side elevations of a drop-hammer lifting
mechanism are shown in Fig. i8. The board A passes between
the rolls B and C. One roll rotates in a fixed position and the
other one is alternately pressed against the board and then with-
drawn from it, when the hammer is in operation. The pressure
of the movable roll is applied for raising the hammer head and
released for allowing it to drop upon the work. The roll that is
withdrawn is usually the front one which has an eccentric bearing
so that a sUgfat rotary movement will cause the roll to release
?1(. iS. Board 'Dnp-hammtt Uftinc J£»ib*alam
the board. As the hammer drops and approaches the bottom
of its stroke, it engages some form of trip or latch which holds
the eo^ntric roll in the outward position so that the roll moves in
against the board; the hammer is then immediately elevated pre-
' paratory to striking another blow. As the hammer approaches
the top of its stroke, the eccentric roll is again automatically with-
drawn, thus stopping any further upward movement. The ham-
mer will then fall and repeat the cycle of movements and will
continue to run automatically, provided the board clamps at D
are not allowed to grip the board. The position of these clamps
is controlled by a foot-treadle. When this treadle is released,
ROTARY AND RECTILINEAR MOTIONS 95
the clamps grip the board as it reaches the top of its stroke and
starts to move downward, so that the hammering action discon-
tinues until the foot-treadle is again depressed. This mechanism
for transmitting the rotary motion of the rolls to board A , which
has a rectilinear movement, is similar in principle to the rack and
pinion, except that motion is transmitted entirely by frictional
contact instead of by means of teeth which give a positive drive.
Combined Rectilinear and Rotary Movements. — The piston
of the pump shown in Fig. 19 has, in addition to a rectilinear
movement, a rotary motion. This pump was deigned for
pumping water or other liquids containing foreign materials,
such as weeds, pieces of rope, paper, etc., which might enter the
Flf. 19. Platoa havlnc ComUnad R*ctUln«M and Rotaiy MaramMita
pump cylinder. Instead of using suction or disdiarge valves
which would beomie clogged and cause trouble, the opening and
closing of the ports is controlled by the rotary movement of
the piston, and any fore^ materials of the kinds mentioned are
sheared off by the edges of the ports. The rectilinear motion of '
the piston is obtained from a cranit. A miter gear keyed to the
end of the crankpin meshes with a mating gear keyed to the end
of the connecting-rod, so that, as the piston is moved in and out,
it is also given a rotary motion. The piston is of the trunk type
with an opening at both ends and a partition in the center. The
head end at the left of the partition contains a port which al-
96 MECHANICAL MOVEMENTS
temately registers with the suction and delivery ports. When
the piston is in the position shown, both ports are closed, but,
as soon as the pump rotates in the direction indicated by the
arrow, the suction port begins to open. When the crank has
moved 90 degrees, the piston port will be exactly over the suction
port and, when the opposite dead center is reached, both ports
will again be closed. When the crank is on the bottom quarter
or at the center of the return stroke, the piston port will be
opposite the delivery port
CHAPTER IV
REVERSING MECHAinSMS
A SEVESSAL of motion is essential to the operation of many dif-
ferent forms of mechanism. Machine parts having a rectilinear
or straight-linemotion must, of necessity, reverse their movement,
and many rotating parts also revolve first in one direction and
then the other. The reversal in some cases is applied to a single
shaft or slide and, in other instances, an entire train of mechanism
is given a reversal of' motion. The types of reversing mecha-
nisms vary considerably, both as to principle of operation and as
to form or design. Some are so arranged that the reversal of
motion occurs at a fixed point in the cycle of movements, whereas,
with other designs, the point of reversal may be changed by means
of adjustable dogs or tappets which are attached to the movable
part and control the action of the reversing mechanism. The
adjustable type is reqtiired on machine tools for varying the
length of the stroke made by a cutting tool or machine table so
that the stroke will conform to the length of the work. Revers-
ing mechanisms also differ in that some are hand-controlled
and others are operated automatically. A crank-driven slide
might be regarded as a form of reversing mechanism, since the
member having a rectilinear movement reverses its motion at
the end of each stroke. In this chapter, however, the forms of
reversing mechanism illustrated and described will be those
intended primarily for reversing motion.
Intermediate Spur Gears for Reversing Motion. — A simple
method of obtaining a reversal of motion by means of spur gears
is shown at A and B in Fig. i, where the reversing gears used
on some designs of lathe headstocks are illustrated diagram-
matically. The two intermediate gears b and c are mounted on
a swiveling arm which can be adjusted for engaging either one
of the intermediate gears with the spindle gear. When the gears
97
98 MECHANICAL MOVEMENTS
are in the position shown at 4, the drive is from a through c to d.
When the arm carrying the intermediate gears is shifted as
indicated at B, the motion is transmitted through both inter-
mediate gears or from a through b and ctod, thus reversing the
direction of rotation. This mechanism, as appUed to a lathe,
is used tor reversing the rotation of the lead-screw when cutting
left-hand threads, in order to make the tool carriage travel from
left to right. .
Another method of obtaining a reversal of rotation by means of
an intermediate gear is illustrated by diagram C, Fig. i. In
this case, there are two sets of gearing between the driving and
Common Matboda of Obtalidiif « RototmI <rf Uotloa
driven shafts. For the forward motion, the drive is from gear
e to/. When the rotation of the driven shaft is to be reversed,
gear e is shifted to the left and into mesh with the intermediate
gear g, as shown by the dotted lines, so that motion is trans-
mitted through e, g, and h. This general arrangement for ob-
taining a reversal of rotation is applied extensively to the trans-
mission gearing of automobiles.
Bevel-gear Type (tf Reversing Mechanism. — A combination
of three bevel gears, as illustrated by diagram D, Fig. i , is apphed
to many different classes of mechanisms for obtaining a reversal
REVERSING MECHANISMS 99
of motion, especially when the reversing action is automatically
controlled. With the usual arrangement, gear j is the driver
and it is constantly in mesh with the bevel pinions / and k.
These bevel pinions are loose upon the driven shaft and have
a clutch m interposed between them. This clutch is free to move
endwise along the shaft, but it slides along a key or feather which
compels it to revolve with the shaft. Each bevel pinion has
teeth corresponding to the clutch teeth, so that the engagement
of the clutch with either pinion locks it to the shaft. Since these
bevel pinions revolve in opposite directions, as indicated by the
arrows, the rotation of the driven shaft is reversed as clutch m
is shifted from one gear to the other. When the clutch is in
the central or '' neutral '' position, it does not engage either gear,
and no motion is transmitted to the driven shaft. Many of the
reversing mechanisms which are equipped with this bevel gear
combination differ in regard to the method of operating the
clutch. For instance, clutch m might be shifted by the direct
action of a slide or table having a rectilinear motion, or an auidl-
iary mechanism might be utilized to give the clutch a more rapid
movement at the point of reversal. Some of these auxiliary
features will be referred to later.
Two-speed Reversing Mechanism of Bevel-gear Type. — On
some classes of machinery, it is desirable to have a relatively
slow motion in one direction followed by a rapid return move-
ment, in order to reduce the idle or non-productive period. One
design of reversing mechanism of the bevel-gear type, by means
of which a slow forward speed and a rapid return speed may be
obtained, is illustrated at E in Fig. i. In this case, there are
two driving as well as two driven gears. The larger driver n
is made cup-shaped so that a smaller driver can be placed in-
side. When the clutch engages the smaller driven gear p, the
fast speed is obtained, and, when the clutch engages gear 9, the
speed of the driven shaft is reduced an amount depending upon
the ratio of the slow-speed gearing. Reversing mechanisms of
this general type are not adapted for reversing the motion of
heavy slides or work tables nor for fast-running machinery,
because of the excessive shocks and stresses incident to a
XOO MECHANICAL MOVEMENTS
sudden reversal of movement in case of high velocities or heavy
loads.
Reversal of Motion with Friction Disks. — When motion is
transmitted between shafts located at right angles to each other
by the type of factional transmission shown at B in Fig. 14,
Chapter I, a reversal of rotation is easily obtained. As disk c
is shifted inward along the face of disk J, the velocity ratio is
gradually reduced, and when disk c passes the axis of disk J, the
direction of rotation is reversed. This form of transmission has
been applied to the feeding mechanisms of certain types of
machine tools, and to other classes of machinery, especially where
simplicity of design and ease of operation and control are es-
sential factors. One method of arranging this form of drive, as
applied to an automobile transmission, is to moimt the driving
member on a sliding shaft whidh enables the driving and driven
disk to be readily disengaged, thus combining in one simple mech-
anism the clutching, speed-changing, and reversing functions.
Reversal from Open and Crossed Belts. — Shafts are often
connected with open and crossed belts for permitting a reversal
of rotation. The arrangement is illustrated by the diagram P
in Fig. I. There are three pulleys on the driven shaft. The
central pulley t is keyed or attached to the shaft, whereas the
outer pulleys s and u are loose and free to revolve upon the shaft.
When the ^' open " belt r is shifted onto the tight pulley ^, the
driven shaft revolves in one direction and its rotation is re-
versed when the crossed belt w replaces the open belt on the
tight pulley.
This form of drive is sometimes modified by having two pul-
leys on the driven shaft and a clutch interposed between the
pulleys, so that either of them may be made the driven member.
Thus, when the clutch is engaged with the pulley connecting
with the open belt, the rotation is the reverse of that which is
obtained when the clutch engages the pulley driven by the crossed
belt. The countershafts for engine lathes and other machine
tools which may require a reversal of movement are commonly
arranged in this manner. Open and crossed belts are also ap-
plied to belt-driven planers for reversing the motion of the platen
• •••••••
• • • .• • • •
• • • *• • •
REVERSiNajiffiCHAiffcMts; ••% : ••: : / •: loi
or work table. Many planer drives have pulleys which are so
proportioned as to give a rapid return movement. A common
arrangement is to place a central or tight pulley on the driven
shaft which has two steps or diameters, the smaller one of which
is for obtaining a fast return motion.
Incidentally, belt drives of the type referred to are often used
in place of gearing, for reversing heavy or fast nmning parts,
because the belts slip somewhat if the load becomes excessive,
due to the stopping and starting at the points of reversal, and
this slipping action automatically protects the mechanism from
injurious shocks or stresses.
Operation of Reversing Clutches. — When a reversal of motion
depends upon the action of a clutch which is shifted from one
gear to another revolving in an opposite direction, it is essential
to operate the clutch rapidly and to secure a full engagement of
the clutch teeth. Provision should also be made against dis-
engagement of the clutch as the result of vibrations incident to
the operation of the machine. There are two common methods
of controlling the clutches used in connection with the bevel-gear
type of reversing mechanism illustrated at J9 in Fig. i. One form
of control may be defined as the swinging-latch type and the
other as the beveled-plunger type. The general principle of
operation is the same in each case, and is as follows: When the
work table, or whatever part is to be reversed, approaches the
end of its stroke, a spring is compressed, and then a latch or trip
allows this compressed spring to suddenly and rapidly throw the
reversing clutch from one gear to the other. Reversing mecha-
nisms of this general design are often called the '' load-and-fire "
type, because the spring is first loaded or compressed and then
tripped to secure a rapid movement of the clutch and a reversal
of motion at a predetermined point within dose limits. The
action of the compressed spring also insures a full engagement
of the clutch teeth and prevents the clutch from stopping in the
central or neutral position, which might occur if a spring were
not used and the momentum of the part to be reversed were
insufficient to carry the clutch across the space intervening be-
tween the two reversing gears.
I03 ;•■.; :•': yiiitCBAHiCAL-MOvmsEins
Latch Tjrpe of Reversiiig Clutch Control. — The reversing
mechanism illustrated in Fig. 3 is a bevel-gear type equiiq>ed
with the swinging latch forni of clutch control. This mechanism
is affiled to a cylindrical grinding machine for reversing the mo-
tion of the work table, and is located at the rear of the machine.
The rockshaft H extends through to the front of the machine
Sprint Hid I'tcli Tjp* of Rarwalac antch Control
and has attached to it a lever which is engaged by dogs on the
work table, the distance between these dogs being varied ac-
cording to the length of stroke required. At the rear end of
rockshaft E there is a lever G which, by means of link J, trans-
mits motion to the reversing mechanism. As the work table
approaches the end of its stroke, lever G swings either to the
right or left as the case may be. If the motion is to the left,
tappet A, connected to link /, compresses spring L on rod Jf
REVERSING MECHAOTSMS 103
and forces block D against a square shoulder on the lower side
of latch B. Continued movement of tappet A to the left causes
the beveled side of A to lift latch B, thus releasing block Z),
which, with rod My is thrown rapidly to the left under the im-
pulse of the compressed spring L,
After the movement of shaft M to the left, the shoulder on
latch C drops in behind block £. The fork N on rod M also
throws shaft O to the left and with it the reversing clutch P which
is keyed to this shaft. The motion which prior to reversal was
transmitted through bevel pinion P to the main gear R is now
from pinion Q to JR so that the movement of the work table is
reversed. When the work table approaches the end of its stroke
in the other direction, tappet A is moved to the right, thus com-
pressing spring S, Then latch C is lifted by the beveled edge on
A and the parts JLf , Ny and O are quickly shifted to the right
by ^ring 5, thus again reversing the motion.
If the operator desires to stop the traversing movement at
the end of the stroke, this may be done by the movement of a
knob located in the center of the table-traversing handwheel at
the front of the machine. This knob is connected with a plunger
T which, by pressing the knob, may be held imder pressure
against the reversing clutch P. When this clutch is shifted at
the end of the stroke either by springs L or 5, plunger T drops
into a groove in clutch F, thus holding it in the central or neutral
position. The knob previously referred to may be set at any part
of the stroke to stop the traversing movement at the end of that
stroke. The withdrawal of the knob again starts the traversing
movement without requiring any further action on the part of
the operator. The shaft connecting with bevel gear R extends
to the front of the machine and, through suitable gearing,
transmits a rectilinear motion to the work table of the grinding
machine.
Beveled Plunger Control for Reversing Clutch. — An example
of the beveled plunger type of clutch control for a reversing
mechanism is shown in Fig. 3. This design is also intended for a
cylindrical grinding machine. The point of reversal is controlled
by the tappets A which are adjusted along the work table to vary
7A
I04
MECHANICAL MOVEMENTS
the length of the stroke. These tappets alternately engage
lever B at the ends of the stroke and, by swinging this lever
about its pivot, shift bar C which transmits motion to the re-
versing clutch. If the work table is moving toward the right,
the tappet at the left engages lever B as the table approaches the
end of its stroke. The movements of the lower end of reversing
lever B towards the left forces the beveled plunger D downward,
thus compressing a spring that is located beneath it. When the
point of the V-shaped end of lever B has passed the point of
plunger Z?, the latter is suddenly forced upward by the com-
Fig. 3. Spring and Bereled Plnngmr Control for RoTorting Clutch
pressed spring and lever -B, rod C, and the reversing clutch are
shifted rapidly.
There is a certain amount of lost motion between the studs E
on bar C and the reversing lever B, As the result of this lost
motion, the clutch is not entirely disengaged until the V-shaped
point of the reversing lever has passed the point of plunger Z>;
the reversing clutch is withdrawn slowly from the bevel pinion
which it engages imtil the sudden action of pltmger D causes it
to shift rapidly into engagement with the opposite bevel pinion.
The clutch is held in engagement imtil the next reversal of motion
by the upward pressure of the plunger against the beveled end of
the reversing lever B, With the particular design illustrated,
REVEkStNG MECHANISMS 10$
the point of reversal can also be controlled by hand lever P which
is connected to rod C; by placing this lever in a central position,
the clutch is shifted to neutral and the movement of the work
table discontinued.
Controlling Point of Reversal by Special Mechanisms. — The
points of reversal for a reciprocating slide are usually controlled
by trip dogs moimted directly on the slide and adjusted to give
the required length of travel or stroke. It is not always con-
venient, however, to control the reversal in this way. For
instance, if the operating slide is at the rear of a machine where
the trip dogs cannot be adjusted readily, some form of mecha-
nism which operates in unison with the slide may be used to per-
mit locating the trip dogs at the front of the machine. A
simple method of controlling the points of reversal from the
front of the machine is applied to Landis grinders. The wheel
slide travels along ways at the rear of the machine and the length
of stroke is regulated in accordance with the length of the work
by two trip dogs mounted on a wheel or circular rack at the front
of the machine. The shaft carrying this wheel extends through
the machine and is connected by gearing, so that it has an oscil-
lating or turning movement in first one direction and then the
other, which movements correspond to, and are in imison with
those of the wheel carriage at the rear. Worm teeth are formed
on the periphery of the trip-dog wheel and the dogs are held in
position by worms which may be lifted out of engagement when
the dogs are to be adjusted considerably. The dogs alternately
strike a tappet or lever which controls the movements of the
reversing clutch.
Another method of controlling the reversing points of a rear
slide is by means of a shaft connected through gearing with the
reciprocating slide and having at the front end a pinion meshing
with a sliding rack carrying the trip dogs. As the rear slide
operates, it turns the pinion shaft in first one direction and then
the other, which imparts a reciprocating motion to the rack.
The trip dogs attached to the rack, by engaging a lever, cause a
reversal of motion by means of a clutch-and-gear type of reversing
mechanism.
Io6 MECHANICAL MOVEMENTS
An indirect or independent method of controlling the points of
reversal on a Brown & Sharpe automatic bevel gear cutting ma-
chine is illustrated in fig. 4. The cutter-slide A must be set at
an angle corresponding to the inclination of the gear teeth to be
cut, so that it would be difficult to have the trip dogs attached
directly to this slide. To avoid such an arrangement, a sUdtng
rack B is employed. This rack, meshes with a pinion C which
rotates in unison with the feeding of the cutter-slide, ^ce this
pinion and the slide derive their motion from the same shaft.
As pinion C rotates in first one direction and then the other, it
traverses the rack B, which, by means of the adjustable dogs E,
controls the action of the reversing mechanism enclosed at F,
With this arrangement, the traversing movement of the rack can
be made less than the travel of the cutter-slide, if this is desirable
because of limited space. On the other hand, if the traversing
movement of the slide is to be very short and it is essential to
reverse it at a given pdnt within close limits, the movements of
REVERSING MECHANISMS
107
the reverse controlling rack can be increased considerably as
compared with the motion of the cutter-slide.
Mechanism for Shifting Open and Crossed Belts. — The open
and crossed belts illustrated by diagram F, Fig. i, are shifted
auttnnatically for obtaining a reversal of motion, when used to
drive such machines as planers, broaching machines, or other
classes of mechanisms which are designed for continuous oper-
ation and equipped with this form of drive. A side elevation
Kg. ;. Stranlns Uaeluuitom of ■ Bdt-driran Plana
and plan of the automatic belt-shifting device used on a planer
is illustrated in Fig. 5. The shaft on which the belt pulleys B
are mounted transmits motion to the planer table A through
a train of gearing which gives a suitable speed reduction. In
order to reverse the motion of the work, table, this entire train
of gearing is reversed by alternately shifting the open and
crossed belts onto the central pulley, which is attached to the
shaft. The length of the stroke is governed by the distance
io8
MECHANICAL MOVEMENTS
between the two dogs K which may be adjusted along a groove
at the side of the table. The position of each belt is controlled
by a guide C having an opening at the end through which the
belt passes. These two guides or shifters, which are in the
fonn of bellcranks, axe pivoted and the inner ends carry small
rollers that engage a groove in the cam-plate D. This cam-
plate is pivoted at E and is connected by a link F with the aim
or lever G which is pivoted at H.
When the planer is in operation, the table moves in a direction
depending upon which belt is on the tight pulley. When this
movement has continued far enough to bring one of the dogs K
into contact with arm G, the latter is pushed over about its pivot,
thus imparting a swinging movement to the cam-plate D. The
groove in this cam-plate is so fonued that the belt on the tight
pulley is shifted to the loose pulley and the other belt is moved
over to the driving poation on the tight pulley. At the end of
the return stroke, the other dog engages arm G, thus swinging the
cam-plate in the opposite direction and again tever^g the
motion.
Reversal of Motion ttirough E{^7cllc Gearing. — A train
of epicyclic or differential gearing may be designed to g^ve a
reversal of motion. This form of txansmis^on has been applied
REVERSING MECHANISMS 109
to some automobiles of the smaller sizes. The principle govern-
ing the operation of one of the earlier designs is shown by the
diagram, Fig. 6. Two sets of difEerential gears, indicated at
A and B, are mounted inside of drums. These drums may be
revolved independently for obtaining the slow forward speed and
a reverse motion, or they may be locked together so as to re-
volve as a unit with the crankshaft for obtaining the direct high-
speed drive. The central gear a is the driver in each case, and
is keyed to the crankshaft. The slow forward ^>eed is obtained
with the combination illustrated at ^. To obtain a reduction of
speed, the internal gear b is held stationary by the application
of a brake-band to its periphery; the pinions c carried by the
driven member are then forced by the driving gear a to roll
around in^de of the internal gear, thus transmitting a slow rotary
motion to the driven member attached to the pinions. In order
to obtain a reversal of motion through the combination of gear-
ing illustrated at B, the disk carrying the pinions is prevented
from rotating by the gripping action of another brake-band,
BO diat the pinions merely revolve on their studs and rotate the
no MECHANICAL MOVEMENTS
internal gear in a reverse direction. In this case, the internal
gear is the driven member and transmits motion to the driving
sprocket.
A reversal of motion may also be obtained with the train of
epicyclic gearing shown in Fig. 7. In this case, there is no inter-
nal gear. Gear A is motmted on the sleeve of sprocket Aiy gear
D is keyed to shaft K, and gear F is attached to the extended
hub of dnmi H. The three gears, B, C, and E are locked to-
gether and revolve upon a pin carried by drum G. A duplicate
set is also located on the opposite
side of the drimi, as the illustra-
tion shows. When this drum is
held stationary by a brake-band,
gear A and sprocket Ai are driven
at a slow forward speed through
gears Z7, C, and B, gears D and
A revolving in the same direction.
Fig. 8. Ratchet Meduuiitm which rm. j- i. i.« 1. j ^ • • ^^
win AntoniAticany Reverse alter The direct high-speed dnve IS ob-
makiiif e Predetermined Nnmber tained when clutch J is engaged,
ol ReTolotioiis ^ 1 1 1 • t «
the whole mechamsm then revolv-
ing as a unit with shaft K. When drum H is held stationary by
a brake-band, gear D causes gear E to revolve about the station-
ary gear F in a direction opposite to the rotation of D; conse-
quently, gear A is forced to follow in the same direction in which
drum G and the planetary gears £, C, and E are moving, thus
reversing the motion of gear A and the sprocket.
- Automatic Ratchet Reversing Mechanism. — The simple de-
sign of ratchet reversing mechanism illustrated in Fig. 8 enables
a ratchet wheel to be automatically reversed after making a
predetermined number of revolutions, and the arrangement is
such that the time of reversal or the number of revolutions made
by the driven ratchet prior to reversal may be varied at will
throughout a wide range. The double pawl A is carried by an
oscillating arm (not shown), and this pawl engages the driven
ratchet B. Mounted concentrically with B there is a smaller
controlling ratchet C which is normally restrained from rotating
by suitable frictional resistance. The larger diameter of ratchet
REVERSING MECHANISMS III
B prevents pawl A from engaging the smaller ratchet C, except
when the deep notch D is reached by the pawl which then drops
down into engagement with C.
The reversal of motion is effected by the engagement of the
extension on pawl A with one of the trip dogs E. The nimiber
of revolutions made by r Ichet B prior to reversal depends upon
the number of deep notches D and the position of the trip dogs
E. When this mechanism is in operation, ratchet B receives an
intermittent motion from the oscillating pawl A and the con-
trolling ratchet C remains stationary until one of the deep notches
D is engaged by pawl A ; then ratchets B and C rotate together
an amount depending upon the motion of the pawl. Control-
ling ratchet C then remains stationary until another deep notch
is engaged. The repeated movements of ratchet C each time the
pawl drops into a deep notch, finally bring one of the trip dogs
E into contact with the projection on the pawl; the latter is
then swung around so that its opposite end engages ratchet B
and, consequentiy, the direction of rotation is reversed. The
time of reversal may be controlled by varying the distance be-
tween the trip dogs and by having one or more deep notches in
the driven ratchet.
Combined Reversing and Feeding Movements. — Some re-
versing mechanisms are so designed that the longitudinal move-
ment of a reversing rod is accompanied by a rotary motion for
imparting a feeding movement at the time reversal occurs. A
reversing device of this kind, as applied to a Richards' side-
planing machine, is illustrated in Fig. 9. The saddle A is
traversed along the bed B by means of a screw, the rotation of
which is reversed by open and crossed belts that are alternately
shifted from loose pulleys to a tight pulley attached to the screw.
The two projecting arms C which are bolted to A strike dogs D
mounted on rod £, which, by its longitudinal movement, ac-
tuates the belt-shifting mechanism. When rod E is shifted in a
lengthwise direction, it is also given a rotary motion in the
following manner: Within the bearing F there is a bushing
having cam grooves cut into it, as shown by the enlarged de-
tailed view. These grooves receive rollers carried by a pin that
112 MECHANICAL MOVEMENTS
passes through the rod E. With this arrangement, any endwise
movement of rod E is accompanied by a rotary motion resulting
from the engagement of the rollers with the helical grooves in
the fixed bushings of bearings P. This rotary movement is
transmitted throu^ bevel gears to a rod G viach imparts a
downward feeding movement to the feed-screw of the tool-
slide, through the medium of ratchet gearing.
Automatic Control of Spindle Reversal. — Fig. lo represents
a sectional view through the bed of an automatic screw ma-
chine, beneath the headstock, and illustrates the mechanism
for automatically controlling the reversal of the spindle rotation.
This machine is driven by a single belt pulley rotating at con-
stant speed. The various movements of the machine, other
than revolving the spindle, are derived from a shaft at the rear
which rotates at a constant speed. On this shaft H is mounted a
series of automatically-controlled clutches which are similar in
action to those used on punch-presses. These clutches control
the feeding of the stock., the opening and closing of the chuck,
the revolving of the turret, the reversing of the main spindle and
the changing of the speed from fast to slow, or vice versa. This
back-shaft H is connected by change-gearing through a worm
REVERSING MECHANISMS
"3
drive, with a slow moving camshaft A at the front on which are
mounted the cams for the txirret and cross-slide movements and
a series of dog carriers B carrying tappets or dogs which control
the action of the different clutches on the back-shaft. The ratio
of the change-gears previously referred to determines the du-
ration of the cycle of operations and, consequently, the length
of time it takes to make a given piece of work.
The main spindle is reversed by a dutch located between two
clutch members revolving in opposite directions. The carrier
Fig. 10, Amngemont for AntoniAtically ControHing Spindle Reversal
B has an annular T-slot in which adjustable dogs like the one
shown at C are mounted. These dogs engage a tappet D on lever
Ey the rear end of which carries a screw F, the cylindrical
point of which enters a cam groove in dutch G, This dutch is
mounted loosely on shaft H which revolves continuously. A
plan view of the cam is shown in detail above the end view.
The cam groove is exactly the same on the other side as on the
side shown, the dutch being arranged to engage each half revo-
lution and then automatically disengage. The normal position
114 MECHANICAL MOVEMENTS
of the pin F is in the recess at a. When it is lowered entirely out
of the groove by the action of dog C on tappet D against the
pressure of spring /, this releases dutch G, which is forced for-
ward by a spring N coiled about the shaft, until it engages a
mating member 0, fastened to shaft H^ and begins to revolve.
Meanwhile dog C has passed tappet D^ allowing pin P to drop into
the cam groove again. The clutch G^ as it revolves, brings in-
clined face h of the groove (or a similar incline on the opposite
side) into contact with F, and the continued revolution of G,
through the action of this inclination on the pin, forces the dutch
teeth out of engagement, stopping G again with the pin in po-
sition a as at the start. A cam P, also loose on the shaft H^ is
keyed to G. This cam engages a roll Q on the end of lever
X, which operates a dutch fork, controlling the position of the
main spindle dutch. When it is time to again reverse the
spindle, another dog C is set in the proper position, and the dutch
is tripped, revolving for a second time a half revolution and
stopping, thus operating lever K and the spindle dutch to
change the direction of the spindle rotation. This represents
the normal procedure in cases where the time taken to make
one piece is short enough so that the rotation of dog carrier B
is reasonably rapid. For many pieces, however, this movement
is so slow that dog C does not come out from imder tappet D in
time to allow pin F to drop into the cam groove before the
clutch has made the required half revolution. In such cases,
indine h would pass without disengaging the clutch and pin P
could not enter imtQ the next recess came aroimd and the next
incline b\ hence the clutch would be stopped at the end of one
revolution instead of a half revolution. This difficulty has been
very simply overcome by the following means:
Tappet D is pivoted to lever E as shown, and is forced back
against a shoulder to the position indicated, by a spring M
located in a drilled hole and pressing against a plunger bearing
on D, This spring is of such strength as compared with spring
/ that the first effect of dog C, when it strikes Z), is to move the
latter backward without raising lever E, When D has been
pressed so far back that it strikes the shoulder at the left, fur*
REVERSING MECHANISMS 115
ther movement being impossible, E is raised, pin F is withdrawn
from the cam slot in the clutch G, and the latter is allowed to
engage fixed member on the shaft H^ and starts to revolve.
A cam surface c is provided on G which, immediately after the
dutch begins to rotate, strikes pin F and depresses it still fur-
ther, thus raising tappet D clear above the point of dog C, and
allowing it to swing back to its normal position against the
shoulder at the right imder the influence of spring M, Lever E
is then ready to drop instantly, as D and C are entirely dear of
each other. As soon as the end of cam projection c passes, F
drops into the groove and the rotation of the cam is arrested after
a half revolution, as required. When it is known that shaft H
revolves at 1 20 revolutions per minute, so that the half revolution
of G occupies but one-fourth second, it will be seen that the
device has a difficult duty to perform, but operates in a very
satisfactory manner.
Automatic Variation in Point of Reversal. — One of the many
interesting mechanisms found on textile machinery is the one
employed on fly frames for controlling the winding of the roving
on the bobbin. The way the bobbins are driven at a decreasing
rate of speed as the diameter increases is explained in connection
with Fig. 13, Chapter VIII, which shows diagrammatically the
relation of the different parts. As mentioned in connection
with that illustration, the bobbins not only revolve but are given
a vertical redprocating motion, in order to wind the roving onto
them in successive heUcal layers. This winding of the roving
onto the bobbin involves, in addition to decreasing the speed as
the diameter increases, a decrease in the traversing speed of the
bobbin and a gradual shortening of the bobbin travel as one layer
of roving is woimd upon another. The bobbin should move a
distance equal to the diameter of the roving while it rotates
relative to the " flyer " a distance equal to one revolution; there-
fore, as the bobbin speed gradually diminishes, it is also neces-
sary to decrease the rate of traverse, so that each layer of the
roving will be coiled dosely. The change in the point of reversal
in order to shorten the stroke as the bobbin increases in diameter
is required in order to form conical ends on the wound bobbin
ii6
MECHANICAL MOVEMENTS
and a finn winding that will not unravel and cause trouble,
such as would be the result of attempting to wind each layer the
full length of the bobbin. These changes occur simultaneously,
although they will be referred to separately in describmg the
" builder motion " illustrated diagrammatically in Fig. ii.
The plates B and C engage a screw A , which has a right-hand
thread extending along one-half its length and a left-hand thread,
along the remaining half.
These plates and the screw
are traversed vertically
with the bobbin carriage.
The vertical shaft D car-
ries a dog £ having two
arms located i8o degrees
apart. At each end of
the stroke, shaft D makes
a half turn which motion
is utilized for rever^g
the motion, for shifting
the cone belt slightly in
order to decrease the
speed, and also for short-
ening the stroke of the
bobbin. As the plates B
and C move vertically, one
end of the tumbling dog
E bears against them until
it slides off at one end.
Prior to the disengage-
ment of the dog with one
of the plates, gear P on the cone-pulley shaft revolves idly in
a space on the rim of gear G where the teeth are omitted.
There are two of these spaces located i8o degrees apart, as
the illustration indicates. One of the projecting pins on the cUsk
H at the lower end of shaft Z> is in engagement with a lever /
which has attached to it a spring that holds the lever agiunst a
{nn and tends to turn shaft D. When dog E slides off one end
REVERSING MECHANISMS II7
of a plate, shaft D is turned far enough by the action of the
spring and lever / to bring gear G into mesh with pinion F\ con-
sequently, gear G is revolved one-half turn or until pinion F
engages the space on the opposite side where there are no teeth.
The partial rotation of shaft D shifts the reversing gears through
a connection at the lower end and starts the bobbin carriage and
plates B and C in the opposite direction. As the opposite end
of the tumbling dog E swings aroimd, it engages one of the
plates and again causes a reversal of motion as it slides off of the
opposite end.
The shifting of the belt on the cone-pulley at each reversal,
for gradually decreasing the speed as the bobbin winding in-
creases its diameter, is obtained by connecting rack M with shaft
D through the pinion N and the train of gearing shown. This
rack M has a fork attached to it that connects with the cone-
belt, and it is traversed slightly each time dog E slides off a
plate and allows shaft /) to turn one-half revolution. The re-
duction in the length of the carriage traverse is obtained by
revolving screw A at each reversal and thus shortening the
distance between the plates B and C This rotation of the screw
is effected by pinion P which engages rack M and transmits
motion through the other gears shown to the extension Q on the
screw, which is made square and is free to slide through the gear
hub as the carriage moves vertically. As the plates B and C are
moved toward each other, the tumbling gear E has a shorter sur-
face to traverse before it is disengaged. These two plates both
move the same distance, so that the point of reversal decreases
at each end and the bobbin is wound conical at both ends.
The roving delivered by the front roll is either tightened or
slackened by engaging pinion R with one of the three gears
shown.
Reversal of Motion after Predetermined Number of Revolu-
tions. — With the mechanism illustrated in Fig. 12, a driven
shaft may be reversed after making any predetermined number of
revolutions from i to 100,000 and the motion may be discon-
tinued entirely after the shaft has made any given number of
reversals up to 10,000. This mechanism was applied to a textile
MECHANICAL MOVEMENTS
REVERSING MECHANISMS II9
machine. The reversing shaft A is driven from the vertical
shaft shown through either one of the miter gears B which re-
volve in opposite directions and are alternately engaged with
the shaft by tlie sliding dutch C. The reversal of rotation after
a predetermined number of revolutions is controlled by a system
of ratchets an^ pawls. Another ratchet-and-pawl mechanism
is also utilized for stopping the rotation of A after a given num-
ber of reversals, by placing the shifting clutch C in the central
or neutral position.
The lower miter gear D has a cam which engages the rollers on
the upper ends of bars E. The lower ends of these bars oscil-
late the rockers F which carry two sets of pawls, Gi and G%. The
set of four pawls Gi at the left is in the operating or working
position, as shown in the illustration. There are four pairs
of ratchets Hi, H^, Hz, and H^. The teeth of each pair of
ratchets are cut oppositely and the four pawls on one side of
the ratchet shaft are for engaging the ratchets which control
the number of revolutions made by shaft A in one direction,
whereas the four pawls on the other side of the shaft are for
operating the reverse motion ratchets. These ratchets operate
progressively and transmit motion to disks /i, /t, /«, and I^.
These disks have projections or cam surfaces /, which serve to
shift the reversing dutch C after shaft A has made a predeter-
mined number of revolutions, which number is regulated by
adjusting the ratchets before the mechanism is put into operation.
This system of cam disks and ratchets will be referred to as the
" combination."
Each ratchet has 20 teeth with one deep cut or tooth. Each
tooth of ratchet H^ is equivalent to 8000 revolutions of shaft A ;
each tooth of ratchet Hz is equivalent to 400 revolutions; each
tooth of ratchet H^, 20 revolutions; and each tooth of ratchet Hi
is equivalent to one revolution of shaft A. The mechanism is
set for a given number of revolutions by turning each ratchet so
that the deep tooth is away from the operating pawl a certain
niunber of teeth, the number depending, in each case, upon the
niunber of revolutions of A represented by each tooth. For
instance, to set the combination for a reversal of motion after
8a
I20 MECHANICAL MOVEMENTS
shaft A makes 49,763 revolutions, ratchet ff 4 is so located that
there are six teeth between the operating pawl and the deep
tooth; these six teeth are equivalent to 48,000 revolutions of
A. Ratchet Hi is then set at four teeth, representing 1600
revolutions of A ; ratchet J7t is set at eight teeth, equivalent to
160 revolutions of A^ and, finally, ratchet Hi is set at three
teeth, representing three revolutions of A. The mechanism is
now set for a total of 48,000 + 1600 + 160 + 3 = 49,763 revo-
lutions.
After the mechanism has been set in the manner described, its
action is as follows: The pawl Gi which is actuated once for
every revolution of gear D^ drops into the deep tooth or notch of
ratchet Hi after engaging three teeth on Hi, since, in this par-
ticular case, this ratchet was adjusted so that there were three
teeth between the pawl and the deep tooth. As soon as this
deep tooth is engaged by the pawl, the ratchet H2 is turned a dis-
tance equivalent to one tooth; ratchet H2 then remains station-
ary until Hi has made a complete turn and its pawl again drops
into the deep tooth, when Ht is again moved one tooth. The
pawls are so located that the first one must engage the deep
notch before the next successive pawl can engage its ratchet at
all, and the relation between the other pawls is the same. Ratchet
Ht continues to be moved a single tooth for each complete
revolution of Hi until it has moved eight teeth, in this particular
instance. The pawl of Ht then drops into a deep tooth and
ratchet H$ is moved one tooth. Ratchet Hi now remains station-
ary until Hti by the continued action of J7i, makes a complete
revolution, when Hi is moved another tooth. After Hi has
moved a distance equivalent to four teeth, its pawl, in turn, drops
into the deep notch, and ratchet Hi is turned one tooth. A
complete revolution of Hi turns Hi another tooth and, when
Hi has moved six teeth, in this case, the shaft A will have made
a total of 49,763 revolutions.
This result will be verified in order to more clearly show the ac-
tion of the mechanism. As previously mentioned, each ratchet
has 20 teeth. Each tooth of Hi represents one revolution of
shaft A and the movement of three teeth prior to engagement
REVERSING MECHANISMS 121
with the deep notch equals three revolutions. Since H^ is set
for a movement of eight teeth, Hi will have to make eight com-
plete turns, which will be equivalent to i6o additional turns of
A . Now the four complete turns of E2 necessary for moving Hz
four teeth require 4 X 20 X 20 or 1600 additional turns of A^
giving a total of 1763 revolutions. Finally, the movement of
^4 six teeth requires 6 X 20 X 20 X 20 — 48,000 additional
turns of il, so that the total number of revolutions made by A
prior to reversal equals 49,763, when the ratchet mechanism is
set as previously described.
The progressive action of the ratchets gradually revolves the
cam disks, preparatory to shifting the reversing dutch. The
cam / on disk A first engages and lifts the floating lever Ki at
the left-hand end and the lever L one-half as much. When the
other cam disks act upon K\ and K%, these levers, together with
part Ir, are lifted the full amoimt and spring balls in L cause it
to be thrown quickly into mesh with the dutch C. This dutch
is threaded and two threads are also formed on the upper side
of part L. As levers Xi, X2, and part L are contained in a car-
riage Jf , all are constrained to move paralld to the axis of shaft
A , because of the action of the screw threads on dutch C. This
results in breaking the combination; that is, the floating levers
are all removed from the cams, the four pawls Gi are disengaged
from their ratchets, and the idle set of pawls G^ comes into action,
thereby reversing the rotation of the controlling mechanism.
As soon as the travel of carriage M is completed, which requires
i\ revolution of the clutch, the latter is constrained to act along
the threads on L while making one revolution, until feathers at-
tached to the dutch over-ride the spring balls in shaft A ; the
clutch is then instantiy thrown out of mesh with one bevel gear
and into mesh with the other, thereby reversing the rotation of
shaft A . Just as the dutch starts this rapid shifting movement,
the cam on gear D engages one of the rollers N on part L and
throws the levers all down and the threads on L out of mesh with
the clutch.
The rotation of shaft A is stopped after a predetermined
number of reversals by means of a separate mechanism which
122 MECHANICAL MOVEMENTS
arrests the movement of carriage M midway of its travel. The
worm threads on clutch C then act upon part L and withdraw
the clutph until it is out of engagement on one side and cannot
engage on the other. Carriage M is stopped by a pin O which
drops into a groove m'M after the four ratchets P, having ten
teeth, are properly aligned as regards a deep notch in each
ratchet. These ratchets are operated consecutively by a stepped
four-fingered pawl on R through the medium of a pin connecting
with Jf .
The three diagrams in the lower part of Fig. 12 illustrate the
systems of gearing controlled by the mechanism described in the
foregoing. The requirements, as illustrated by these three
diagrams, are as follows: i. That a reversing gear shall drive
two others continuously in the same direction but in opposite
directions r^ative to each other. 2. That a reversing gear shall
drive one of the two gears continuously in the same direction
and the other in the same direction as that of the reversing gear.
3. That a reversing gear shall drive one gear continuously in the
same direction and shall drive two others alternately in the
same direction as itself. The full arrows and the full circles on
these diagrams belong together, and likewise the broken or dotted
lines and arrows. The full lines connecting the centers indicate
that those gears are linked, whereas the broken lines denote
spring connections. The movement of the reversing driver and
the friction of the links swing the idler gears.
Reversing Motor Drives. — When a machine is driven by an
electric motor, the direction of rotation may be reversed in the
case of a direct-current motor by reversing the current in either
the armature or the field. The motors used for street railway
work are usually reversed by changing the direction of the cur-
rent flowing through the armature, the flow of the field current
remaining the same. If a motor is running, a resistance should
be inserted in the armature circuit before reversing the current
flowing through the armature, and the speed of the motor should
preferably be reduced considerably before reversing the current.
Some motor-driven planers are so arranged that the reversal
of motion for the work table is obtained by reversing the motor
REVERSING MECHANISMS 133
instead of employing shifting belts. When the planer is in
operation, the point of reversal is controlled by dogs similar to
those on a belt-driven planer. With one type of equipment, at
the instant of reversal a pilot switch is thrown by one of the
dogs and the controller short-drcnits the armature through
suitable resistance, thus causing the motor to act as a generator,
and, consequently, as a powerfid electric brake for arresting the
motion of the planer table. As soon as the speed of the motor
has been reduced a predetermined amount, the armature current
is reversed and with it the rotation of the motor and the move-
ments of the work table. The pilot switch takes the place of the
belt-shifting mechanism on beltKlriven planers. The reversal of
motion at the end of each stroke is entirely automatic.
When motion is derived from an induction motor, a change in
the direction of movement involves reversing the rotation of the
revolving magnetism set up by the field windings. If the motor
is two-phase, the current in either one of the phases may be re-
versed to change the direction of rotation, which is accomplished
by interchanging the connections of one of the phases with its
terminals on the motor* For a three-phase motor, a reversal of
rotation is obtained by interchanging the connections of any two
of the line wires with the motor terminals.
CHAPTER V
QUicK-ssrnsN motions
Many machines, especially of the type used for cutting metals,
are equipped with a driving mechanism which gives a rapid
return movement after a working or cutting stroke, in order to
reduce the idle period. For instance, shapers, slotters, and
planers are so arranged that the tool, after making the cutting
stroke, is returned at a greater velocity, thus increasing the
efficiency and productive capacity of the machine. The method
of obtaining this rapid return varies with different types of ma-
chine tools. In some cases, motion for the return movement
is obtained by using two belts which alternately come into the
driving position and rotate the driven member at two rates of
speed. This method is employed with belt-driven planers, the
belt for the return movement of the table connecting with pulleys
having a higher speed ratio. The rapid return movement for
some other types of machines is obtained by transmitting motion
through a different combination of gearing which is automati-
cally engaged at the end of the working stroke. The term
'' quick-return motion," however, as applied to machine tools,
generally relates to a driving mechanism so designed that the
increased rate of speed for the return movement is obtained
through the same combination of parts which actuate the driven
member during the forward or working stroke.
Crank and Oscillating Link. — A simple form of quick-return
mechanism which has been applied extensively to shapers is
shown diagrammatically in Fig. i. The pinion A drives gear
C at a uniform speed, and this gear carries a swiveling block
B which engages slotted link L, The lower end of this link is
pivoted at D and the upper end connects by means of a link
with the ram of the shaper. As the crankpin or swiveling block
B revolves with gear C, it slides up and down in the slot of link
124
QDICE-RETURN MOTIONS
125
L and causes the latter to oscillate about the fixed {Hvot D at
its lower end. The ram of Uie shaper is mounted in guides or
ways so that it is given a rectilinear movement.
A quidt-retum movement is obtdned with this form of drive
owing to the fact that the crankpin B moves through an arc a
during the cutting stroke, whereas, tor the return stroke, it
moves through a much shorter arc h. As gear C rotates at a
uniform speed, obviously the time required for the return stroke,
as compared with the cutting stroke, is in the same proportion
as the lengths of the arcs a and b. The radial portion of block
B may be varied in order to change the length 5 of the stroke.
This mechanism imparts a variable speed to the ram, the q>eed
increasing toward the center of the stroke and then diminishing.
The angle made by the crankpin for the forward stroke equals
180 d^rees + the angle 9 through which slotted link L moves;
for the return stroke, the crankpin moves through an angle equal
to 180 degrees — the angular movement 9 of the slotted link.
The sine of one-half angle 9 equals the radius of the crank divided
. by the distance from pivot Z> to the center of the gear C.
136
UECHANICAL MOVEMENTS
WUtwortii Quick-Return Motion. — A type of quidt-retum
motioa that has been widely used in slotter construction is il-
lustrated in Fig. 2. This mechanism, which is known as the
" Whitworth quick-return," is ^milar in prindple to the crank
and oscillating link combination previously referred to, although
the construction is entirely different. The pinion A drives gear
C at a uniform velocity, and this gear carries a block B which
engages a slot or groove in part D, which is connected by a
link E with the tool-slide of the machine. The line xx represents
the center-line of motion for the tool-slide. The gear C revolves
upon a large bearing P which is a part of the machine frame.
W\f.i
Whitworth Qtdck-ratnni Hodon
The slotted member D has a bearing G, within F, and the center
about which D rotates is offset with relation to the center of
driving gear C; consequently, the crankpin or block B moves
throu^ an arc a during the cutting stroke and through a shorter
arc b for the return stroke, so that the latter requires less time
in proportion to the respective lengths of arcs a and b. The
stroke is varied by changing the radial position of the pin which
connects with link E.
So far as the prindple of operation is concerned, the chief
difference between the Whitworth motion and the crank and
slotted link is that, in the former case, the bearing for the slotted
or driven member is inside of the crankpin drde, whereas, with
QUICK-RETURN MOTIONS
137
the crank and slotted link onnbination, the pivot is outade of
the crankpin circle. As the result of this difference in arrange-
ment, part D in Fig. 2 has a continuous rotary motion, whereas
the slotted link L, in Yvg. 1, swings through a definite angle.
Wth the Whitworth quick-return, the ratio of the time required
for the forward and return strokes is not varied by changing the
length of the stroke. With the crank and oscillating link, a
change of stroke does affect this ratio, the latter increa^ng as
the length of the stroke is increased.
Modification of WhitworOi Motion. — A quick-return mecha-
nism that is a modification of the Whitworth motion combined
with the slotted link and rotating crank is illustrated by the
128 MECHANICAL MOVEMENTS
sectional view, Fig. 3. This form of drive has been applied to a
shaper in order to secure in addition to a quick return a cutting
speed that is practically constant throughout the working stroke.
The driving gear F transmits its rotary movement through a
swiveling block i4 to a ring E which turns about an eccentric C.
On the opposite side of this ring there is a second swiveling
block £, which drives the crank-disk G^ on which is mounted
the main crankpin block H, engaging the vibrating arm or link
L that, in turn, is connected with the ram. The eccentric C is
offset with relation to the center of the driving gear F, and it
remains permanently in a fixed position; therefore, the circular
path of the eccentric ring blocks A and B is not concentric with
the path described by the main crankpin H. In other words,
the circle which these blocks describe as they are driven aroimd
by gear F has a constantly varying radius from the center of
the gear, which compensates for the irregularity of speed ob-
tained by a plain slotted link, and gives a practically constant
movement during the working stroke.
Quick Return from Elliptical Gearing. — Elliptical gearing
has been used to obtain a quick-return motion, although such
gearing is difficult to cut without special attachments^ and com-
paratively few mechanisms requiring a quick-return motion
have this type of drive. The driving and driven gears are of
the same proportions and size as shown in Fig. 4, and each gear
revolves about one of its fod as a fixed center. The distance
between the shaft centers is made equal to the length of the
common major axis. The angular velocity ratio varies according
to the respective radii of the driving and driven gears at the
point of contact. If il is the driving shaft and it rotates at a
uniform speed, the angular velocity of shaft B will increase
during the first half revolution from the position shown in the
illustration, and then decrease during the remaining half revo-
lution. When the gears are in the position shown, the angular
velocity of the driven shaft B is minimum, because that side of
the driver having the shortest radius is in contact with it; as
the driver revolves, the radius at the point of contact gradually
increases, and, consequently, the angular velocity increases until
QUICK-RETURN MOTIONS
129
tooth C is in mesh, when the angular velocity is maximiun.
When point C representing the longest radius of the driving gear
has passed the point of contact, the angular velocity gradually
diminishes until it is again at a minimum.
The actual niunber of revolutions made by each shaft in a
given time is, of course, the same, and the driving and driven
gears both require the same time to complete the half revolution
between the two positions representing the minimum and maxi-
miun angular velocities. The variable motion of the driven
gear, however, may be utilized to give a quick-return movement
to a driven tool-slide or otiier part. When two shafts are to
be connected by elliptical gearing, either the maximiun or tiie
Fig. 4. Sffijitical Geaxiiig tdmuiged to Retnm Driyea Part quickly
miniTmim angular velocities may be selected at will, but, when
one has been determined, the other is fixed; the driver is as-
sumed in all cases to have a constant or uniform angular velocity.
This type of qidck-retum motion has been applied to shapers
in order to return the tool quickly after the cutting stroke. The
driven gear is connected to the ram by a link. The bolt or
crankpin on the gear which connects with the link may be ad-
justed along a groove for varying the distance from the center
of the driven shaft and the length of tiie stroke. Elliptical
gearing has also been used for operating the slide valve of a
steam stamp, such as is used for crushing rock. In this case,
the variable motion obtained from the gearing is utilized to so
control the motion of the valve as to admit steam above the
130
UECEAMCAL HOVEMEMTS
IHston throughout almost the entire downward stroke, whereas,
on the upward stroke, just enou^ steam is used to return the
stamp shaft, in order to reduce steam consumption.
Eccentric Pinion and Elliptical Gearing for Quick Retnm. —
The combination of eccentric and eUiptical gearing, in conjunc-
tion with gears mounted concentrically, as illustrated in Fig. $,
has been utilized to secure a quick-return motion. The pn-
ions A and B are keyed to the driving shaft. The smaller
pinion A is concentric with the shaft and meshes with a half
^ur gear P. The larger pinion B is eccentrically mounted on
the sbaSt and is in line with a half eUiptical gear B, the two gear
segments on the driven shaft bdng offset as shown by the end
and plan views.
In the operation of this gearing, the semi-circular gear P is
driven by the small pituon A aod the elliptical gear by the ec-
centric pinion B. The elliptical gear makes one-half revolutioD
to each complete revolution of its eccentric driving pinioa
QUICK-RETURN MOTIONS 131
If the driven shaft is revolving in a counter-clockwise direction,
the eccentric pinion will be the driver from C to Z>. At the
latter point, the elliptical gear segment leaves the eccentric
pinion and the smaller pinion A comes into mesh with the half
spur gear and continues to be the driver through the remaining
half revolution of the driven shaft, or xmtil the elliptical gear
again comes around into mesh with the eccentric pinion. Owing
to the difference in the diameters of the half spur gear and its
pinion Ay the latter must make two revolutions before the ec-
centric pinion can again engage the teeth of the elliptical gear.
At the point C where the eccentric pinion again becomes the
driver, the radius of pinions A and B is equal, and the transfer
of the load from AtoB does not cause an abrupt change of speed
for the driven member. As the eccentric pinion, however, be-
gins to swing the elliptical gear aroimd, the speed of the driven
shaft is increased until the maximimi radius of the eccentric
pinion is opposite the minor axis of the elliptical gear. The
speed is then at maximum and, as the movement continues,
the speed gradually decreases until the load is transferred to the
concentric pinion A which imparts a uniform velocity to the
driven member.
With the eccentric-elliptical combination of gearing just
described, one revolution of the driven shaft is obtained for
every three revolutions of the pinion driving shaft, two revo-
lutions of the concentric pinion A being required for a half
revolution, and one revolution of the eccentric pinion B for the
remaining half revolution. If this mechanism is applied to a
Blotter or other machine requiring a similar movement, the cut-
ting stroke will occur while pinion A is the driver, because a rela-
tively slow and uniform speed is imparted to the driven shaft.
As the eccentric pinion starts the drive, the speed of the driven
shaft is gradually accelerated and, after reaching the majdmimi,
is reduced to the cutting speed, so that the tool-slide is rapidly
returned to the starting position ready for the next cutting
stroke. The ratio of the quick return to the cutting speed shoidd
not be too great, because a jerky motion and excessive vibrations
in the machine will result. It has been found, by experiment,
132 MECHANICAL MOVEMENTS
that a ratio of 3 to i is about the highest that will give satisfac-
tory operation.
When laying out gearing of this kind, there are a few funda-
mental points which must be observed in all cases: i. The long
radius ^45 of the e<xentric pinion from the shaft center to the
pitch line should equal one-half the distance between the centers
of the driving and driven shafts. 2. The short radius AC of the
eccentric pinion should equal one-half the diameter of the con-
centric pinion. 3. The major axis CD of the elliptical gear
should equal twice the distance between the shaft centers, minus
twice the short radius AC of the eccentric pinion. 4. The minor
axis of the elliptical gear, or twice the distance EG, should equal
the distance between the centers of the shafts. 5. The ellip-
tical gear, assuming that it were complete, should have twice
the number of teeth that there are in its eccentric driving pinion,
and the number of teeth in both the elliptical gear and eccentric
[Mnion should be even. 6. The shaft hole for the elliptical gear
should always be located at the intersection of the major and
minor axes, or in the center of the gear. This type of gearing
QUICK-RETURN MOTIONS 133
is employed when it is especially desirable to secure a uniform
motion during the entire cutting stroke.
Independent Qtick-retum Movement. — On the Brown &
Sharpe automatic screw machine, the quick-return and advance
movements of the turret-slide are controlled independently of
the turret-slide feed cam by means of a crank. The turret A
(Fig. 6) is carried by a slide that moves horizontally along the
machine bed. The movements of the turret-slide are derived
from two different sources. When the turret tools are at work,
the slide is operated by a lead cam through lever B, which has
teeth at its upper end meshing with rack C. While the turret
is being indexed, it is withdrawn rapidly and then quickly ad-
vanced to the working position again, by the action of crank E
which is revolved once for each indexing movement. The rack
C transmits motion to the tiuret-slide through connecting-rod
F, which is pivoted to crank E on the turret-slide. This crank
is on the '^ dead center," as shown in the illustration, while the
tools are cutting; when the turret is to be indexed to bring the
next successive tool in position, it is first withdrawn far enough
for the tool to clear the work, and then the shaft carrying crank
E is turned one revolution, through suitable gearing, by the
engagement of a clutch the action of which is controlled by a
trip dog. When the crank revolves, it allows spring D to draw
back the turret-slide without rack C, while making one-half turn,
and then advance it during the remaining half turn, the rate of
movement being increased by the motion derived from cam A ,
which is laid out to suit the work. This quick-acting crank
operates while the roll on the lower end of lever B is passing
from the highest point of the cam lobe to the point for starting
the next cuL
CHAPTER VI
INTBRMITTBNT MOVEMENTS
It is frequently necessary for machine parts to operate inter-
mittently instead of continuously, and there are various forms
of mechanisms for obtaining these intennittent motions. A tool-
slide which is given a feeding movement at regular intervals
is an example of a p>art requiring an intennittent movement.
Automatic indexing mechanisms which serve to rotate some
member, periodically, a definite part of a revolution, after the
machine completes a cycle of operations, represent other ap-
plications of intermittent movements. The usual requirements
of an intermittent motion, when automatic in its action, are that
the motion be properly timed relative to the movement of parts
operating continuously and that the member receiving the in*
tennittent motion be traversed a predetermined amount eadi
time it is moved. When the machine part which is traversed
intennittently must be located in a certain position with con-
siderable accuracy, some auxiliary locating device may be
utilized in conjunction with the mechanism from which the
intermittent motion is obtained. The spindle carriers of
multiple-spindle automatic screw machines are so arranged
that the carrier is first rotated to approximately the reqidred
position by an intermittent motion, and then it is accurately
aligned with the cutting tools by some form of locating device.
Ratchet Gearing* — One of the simplest and most conmion
methods of obtaining intermittent movements is by means of
ratchet gearing. This type of gearing is arranged in various
wajrs, as indicated by the diagrams in Fig. i. In its simplest
form, it consists of a ratchet wheel a (see diagram A), a, pawl 6,
and an arm or lever c to which the pawl is attached. The arm
c swings about the center of the ratchet wheel, through a frac-
tional part of a revolution, as indicated by the full and dotted
134
INTERMITTENT MOVEMENTS
135
lines which represent its extreme positions. When the move-
ment i^ toward the left^ the pawl engages the teeth of the
ratchet wheel so that the latter turns with the arm. When the
arm swings in the opposite direction, the pawl simply lifts and
slides over the points of the teeth without transmitting motion
to the ratchet wheel. If a load must be sustained by the
Vif. X. Diif«ent AmngeoiMta of Ratchet Oeariog
ratchet gearing, a fixed pawl located at some point, as indicated at
d, is used to prevent any backward rotation of the ratchet wheel.
With geanng of this general type, the faces of the ratchet teeth
against which the end of the pawl bears should be so formed
that the pawl will not tend to fly out of mesh when a load is
applied. In order to prevent such disengagement, the teeth
should be so inclined that a line at right angles to the face of
the tooth in contact with the pawl will pass between the center
of the ratchet wheel and the pivot of the pawl. If the face of
136 MECHANICAL MOVEMENTS
this tooth should incline at such an angle that a line at right
angles to it were above the pawl pivot, pressure against the end
of the pawl would tend to force it upward out of engagement with
the ratchet wheel.
Multiple Pawls for Ratchets. — When a single pawl is used as
shown at Ay Fig. i, the arm whidi carries it must swing through
an arc equal to at least one tooth of the ratchet wheel; hence
the pitch of the teeth represents the minimum movement for the
wheel. If two or more pawls are used, a relatively small motion
of the arm will enable successive teeth to be engaged without
decreasing the pitch of the ratchet wheel. The principle is
illustrated by diagram B which shows two pawls in position
instead of one. As will be seen, one pawl is longer than the other
by an amount equal to one-half the pitch of the ratchet teeth.
With this arrangement, the movement of the arm may equal
only one-half the pitch, if desired, the effect being the same as
though a single pawl were applied to a wheel having teeth re-
duced one-half in pitch. By using three pawls, each varying
in length by an amoimt equal to one-third of the tooth pitch,
a still finer feeding movement could be obtained without ac-
tually decreasing the pitch of the teeth and thus weakening
them.
Reversal of Motion with Ratchet Gearing. — A simple method
of obtaining a reversal of motion is illustrated by diagram C,
Fig. I. A double-ended pawl is used and, in order to reverse
the motion of the ratchet wheel, this pawl is simply swimg from
one side of the arm to the other, as indicated by the full and
dotted lines. Reversible ratchet wheels must have teeth with
bearing faces for the pawl on each side.
Another method of obtaining a reversal of motion is shown at
D. The pawl, in this case, is in the form of a small plunger
which is backed up by a spiral spring. One side of the pawl is
beveled so that the pawl merely slides over the teeth on the
backward movement of the arm. When a reversal of movement
is required, the pawl is lifted and turned half way around, or
until the small pin / drops into the cross-slot provided for it,
thus reversing the position of the working face of the pawl.
rNTERMITTENT MOVEMENTS 137
Ftictional Ratchet Mechanisms. — The types of ratchet gear-
ing previously referred to all operate by a positive engagement
of the pawl with the teeth of the ratchet wheel. Some ratchet
mechanisms are constructed on a different principle in that
motion is transmitted from the driving to the driven member
by frictional contact. For instance, with one form, the driving
member encircles the driven part which has cam surfaces that
are engaged by rollers. When the outer driving member is
revolved in one direction, the rollers move along the inclined
cam surfaces imtil they are wedged tightly enough to lock the
driven part and cause it to turn with the operating lever. When
the driver is moved in the opposite direction, the backward mo-
tion of the rollers releases them. This general principle has been
applied in various ways.
Double-action Ratchet Gearing. — It is sometimes desirable
to impart a motion to the ratchet wheel during both the forward
and backward motions of the ratchet arm or lever. This result
may be obtained by using two pawls arranged as illustrated by
diagram £, Fig. i. These pawls are so located relative to the
pivot of the arm that, while one pawl is advancing the ratchet
wheel, the other is returning for engagement with the next suc-
cessive tooth.
Variable Motion from Ratchet Gearing. — Ratchet gearing,
especially when applied to machine tools for imparting feeding
movements to tool-slides, must be so arranged that the feeding
motion can be varied. A common method of obtaining such
variations is by changing the swinging movement of the arm
that carries the operating pawl. In many cases the link which
operates the pawl arm receives its motion either from a crank or
a vibrating lever, which is so arranged that the pivot for the rod
can be adjusted relative to the center of rotation for changing
the movement of the operating pawl and the rate of feed.
One method of adjusting the motion irrespective of the move-
ment of the operating pawl is illustrated at F in Fig. i . The pawl
oscillates constantiy through an arc a, and this angle represents
the maximum movement for the ratchet wheel. When a re-
duction of motion is desired, the shield b is moved around so
138 MECHANICAL MOVEMENTS
that the pawl is lifted out of engagement with the ratchet wheel
and simply slides over it during part of the stroke. Thus, when
the shield covers three of the teeth as shown in the illustration
the motion of the ratchet wheel is reduced the same as though
the swinging action of the pawl lever had been diminished an
amount corresponding to three of the teeth. With the particular
arrangement illustrated, the shield is held in any position by
means of a small spring plunger c that engages holes in a station-
ary plate d.
Ratchet Mechanisms for Releasing Sinrockets. — Some in-
genious ratchet mechanisms have been applied to the sprocket
wheels of bicycles to permit the pedals to remain stationary while
coasting down a grade or hill. A design that has been exten-
sively used is illustrated in principle by the detailed sectional
view at il in Fig. 2. The sprocket wheel is not attached directly
to the inner member which is shown in section, but motion is
transmitted from one part to the other through frictional con-
tact. The inner ring has a series of recesses equally ^aced about
the circumference. Each of these recesses contains a hardened
steel roller or ball, and the bottoms of the recesses are inclined
slightly. The rollers are lightly pushed up these inclined sur-
faces by blocks behind which are small spiral springs. Any rel-
ative motion of the inner and outer members of the sprocket
causes these steel rollers to either roll up the inclined surfaces
and lock the two parts together or to move in the other direc-
tion and release the driving and driven members, the action de-
pending upon the direction of the relative movement. For in-
stance, if the outer sprocket is revolved in a clockwise direction,
all of the rollers are immediately wedged in their recesses. If
the motion of the outer sprocket is suddenly arrested and the
inner member continues to revolve, the rollers are immediately
released.
An entirely different type of ratchet mechanism designed for
use on the sprockets of bicycles is shown by diagrams B to F,
inclusive, which illustrate its method of operation. The exterior
sprocket is recessed on the inner side for the reception of a crescent-
shaped piece a, which acts as the pawl. The depth of the recess
INTERMITTENT MOVEMENTS
139
and the shape of part a are such that the teeth on the inner ring
b can pass freely when moving in the direction indicated by the
arrow at B; with motion in this direction, part a simply is given
a rocking movement in its recess to allow the successive teeth to
pass. When the relative motion is in the opposite direction, as
indicated by diagram C, the teeth on the inner member swing
part a around in its seat, as shown by the successive diagrams,
until it is finally wedged firmly between the two parts as shown
at F. These so-called " free-wheel " mechanisms were subse-
quently replaced by an arrangement operating on the same
Fig. 3. Ratchet Mechantimi for Rdeasinc Sprockets
general principle so far as the releasing mechanism was concerned,
but so designed that a backward movement of the pedal also
applied a brake.
Automatic Disengagement of Ratchet Gearing. — The action
of ratchet gearing can be stopped automatically after the ratchet
wheel has been turned a predetermined amoimt, by equipping
the wheel with an adjustable shield which serves to disengage
the pawl after the required motion has been completed. This
form of disengaging device, as applied to the cross-feeding mech-
anism of a cylindrical grinding machine, is shown in Fig. 3.
This mechanism is used to automatically feed the grinding wheel
in toward the work for taking successive cuts, and it is essential
X40
MECHANICAL MOVEMENTS
to have the mechanism so arranged that it can be set to stop the
feeding movement when the diameter of the work has been re-
duced a predetermined amount. When the pawl il is in mesh
with the ratchet wheel B, the grinding wheel is fed forward an
amount depending upon the position of screws (not shown)
which control the stroke of pawl A. The automatic feeding
movement continues at each reversal of the machine table, until
the shield C, which is attached to head Z>, intercepts the pawl
and prevents it from engaging with the ratchet wheel, thus stop-
ping the feeding movement. The arc through which the ratchet
Fig. 3. Ratchet Oearinc arranged to Diiengage Automatically after a
Predetermined Movement
wheel is turned before the pawl is disengaged from it, or the
extent of the inward feeding movement of the grinding wheel,
depends upon the distance between the tooth of the pawl and
the end of the disengaging shield. With the particular mecha-
nism illustrated, a movement of one tooth represents a diameter
reduction of 0.00025 inch, so that the amount that the wheel
moves inward before the feeding motion is automatically dis-
engaged can be changed by simply varying the distance between
the shield and the pawl. To facilitate setting the shield, a
thumb-latch E is provided. Each time this thumb-latch is
INTERMITTENrr MOVEMENTS 141
pressed, the shield moves a distance equal to one tooth on the
ratchet wheel. For instance, if the shield is at the point of
disengagement and the latch is pressed sixteen times, the shield
will move a distance equal to sixteen teeth. As each tooth repre-
sents 0.00025 inch, a feeding movement of 0.004 ii^ch will be ob-
tained before the pawl is automatically disengaged. This mech-
anism prevents grinding parts below the required size, and
makes it unnecessary for the operator to be continually measuring
the diameter of the work. It is located back of a handwheel
(which is partiy shown in the illustration) that is used for hand
adjustment. The pawl is kept in contact with the ratchet wheel
and is held in the disengaged position by a small ^ring-operated
plunger P.
Escapements. — An escapement may be considered as a form
of ratchet mechanism having an osdllating double-ended pawl
for controlling the motion of the ratchet wheel by engaging suc-
cessive teeth. Escapements are designed to allow intermittent
motion to occur at regular intervals of time. The escapement of
a dock is illustrated in Fig. 4. As applied to a pendulum dock
the escapement serves two purposes, in that it governs the move-
ment of the scape wheel for each swing of the penduliun and also
gives the pendulum an impulse each time a tooth of the scape
wheel is released. An escapement should be so arranged that the
pendulum will recdve an impulse for a short period at the lowest
part of its swing and then be left free until the next impulse oc-
curs. The time required for a pendulum to swmg through small
arcs is practically independent of the length of the arc. For
instance, if a stationary pendulum recdves an impulse, the time
necessary for its outward and return movement will be approxi-
mately constant regardless of the impulse and arc of swing,
within ordinary limits. Thus, if the impulse is of considerable
magnitude, the pendulum starts with a relativdy high vdodty,
but the distance that it travels counteracts the increase of speed
so that the time remains practically constant for any impulse
or arc of swing. A pendulum that is swinging freely will adapt
the length of its swing to the impulse it recdves, and any inter-
ference which might be caused by the locking or unloddng of
X49
MECHANICAL MOVEMENTS
the escapement will affect the regularity of movement less if it
occurs at the center of the swing rather than at the ends. As the
axe of swing increases, there is a very slight increase in the time
required for the movement, and, therefore, it is desirable that
the impulses ^ven to a pendulum should always be equal.
One of the earlier forms of escapements was known as the
*' anchor " or " recoil " escapement. With this type, the pen-
dulum was never free, but was controlled by the escapement
throughout the swing. To
avcad this effect, the Gra-
ham " dead-beat " escape-
ment, illustrated in F^. 4,
was designed and has been
extensively used. When
the escapement is in ac-
tion, the pallets A and
S alternately engage the
teeth of the scape wheel,
which revolves intermit-
tently in the direction
indicated by the arrow.
With the mechanism in
the portion illustrated,
the point of tooth C is
about to slide across the
inclined " impulse face " or end of the paUet A, thus ^ving the
pendulum an impulse as it swings to the left. When tooth D
strikes the " dead face " of pallet B, the motion of the scape wheel
will be arrested until the pendulum reverses its movement and
swings far enough to the right to release tooth D; as the point of D
slides past the inclined end of B, the pendulum receives another
impulse, and this intermittent action continues indefinitely or until
the force propelling the scape wheel around, which may be from a
spring or weight, is no longer great enough to operate the mech-
anism. In designing an escapement of this type, the pallets are
so located as to embrace about one-third of the circumference of
the scape wheel. One of the features of the dead-beat escape-
rNTERMITTENT MOVEMENTS 143
ment is the effect which friction has on its operation. During
each swing of the pendulum, there is a rubbing action between
the points of the scape wheel teeth and the surfaces of the pallets,
so that the pendulum is retarded constantly by a slight amount
of friction. This friction, however, instead of being a defect,
is a decided advantage, because, if the driving force of the clock
is increased so that the impulse on the pallets becomes greater,
the velocity of the pendulum tends to increase, but this effect
is counteracted by the f rictional retardation caused by a greater
pressure of the teeth of the scape wheel on the faces of the pallet.
If the driving force be increased, the frictional retardation in-
creases relatively in a greater proportion than the driving effect
and, up to a certain point, the time of vibration of the pendulum
diminishes. If the force or weight propelling the dock mecha-
nism is continually increased, a neutral point is finally reached,
beyond which a greater force causes the time of vibration to
increase instead of to diminish. In the design of dock mecha-
nisms, it is desirable to have a driving power of such magnitude
that it ndther accderates nor retards the motion of the pendu-
lum. Many modifications of the escapement previously re-
ferred to have been devised to meet special requirements. The
escapements of watches and of some docks and portable time-
keeping devices have a balance whed instead of a pendulum to
regulate the period of the intermittent action, but all of these
escapements operate on the same general prindple.
Crank and Ratdiet Combination. — An interesting form of
ratchet mechanism is illustrated in Fig. 5. This mechanism is
used on moving picture cameras and also for feeding films through
printing machines. It is commonly referred to as a '' claw "
mechanism or movement. The daw or hook A is double and
engages evenly spaced perforations that are along each edge of
the film. When this device is applied to a moving picture
camera, the film is drawn, from a roll in the film box, down in
front of the lens and then passes to a reel in the recdving box.
The film remains stationary during each exposure and is drawn
downward between successive exposures which are made at the
rate of sixteen a second. The hook A, which engages the film
144
MECHANICAL MOVEMENTS
and moves it along intermittently and with such rapidity, re-
ceives its motion from a crank and cam combination. The two
intermeshing gears B and C revolve in opposite directions. Gear
B has a crankpin upon which the hook is pivoted. An extension
of this hook has a curved cam slot that engages a pin on gear C.
As the two gears revolve, the hook is given a movement corre-
sponding approximately to the D-shaped path indicated by the
dotted lines. While this mechanism is shown in a horizontal
position in the illustration, it would normally be vertical with the
hook uppermost, when in operation. Some of the other claw
mechanisms in use differ from the one shown in regard to the
arrangement of the operating crank and the cam or curved slot
Fig. 5. Crank and Cam Combinatioii lor Operating Claw Mecbaniam
of Moving Picture Camera
for modifying the crank motion. For instance, the cam, in
some cases, is a separate part that is placed between the crank
and the film hook, a pin on the hook lever engaging the cam slot.
Another type of claw mechanism derives both the downward
motion for moving the film and the in and out movements of
the film hook from separate cam surfaces.
Automatic Reduction of Intermittent Movement. — The mech-
anism to be described is applied to a Bryant chucking grinder
for automatically reducing the cross-feeding movement and
depth of cut, as the diameter of the part being ground approaches
the finished size. The head which carries the grinding wheels
(three or four wheels are used on this machine) is given a recipro-
cating motion on the bed of the machine, and the work-spindle
INTERMITTENT MOVEMENTS
I4S
head is mounted on a bracket that can be set at an angle relative
to the motion of the wheel-canying slide for taper grinding. The
shaft which transmits motion to the cross-feed mechanism shown
in Fig. 6 derives its motion from a cam surface on a swinging
member of the wheel-head reversing mechanism, which is of the
Fig. 6. Ratchet Feeding MecluuiiBm amuiged to AotomaticgOy
Diminish the Feeding MoTement
bevel gear and dutch type controlled by a load-and-fire shifting
device. The universally jointed telescopic shaft F2 transmits
motion to the cross-feed mechanism at whatever angle the
swiveUng bracket and work-spindle may be set. The cross-feed
screw Jf 2 has mounted on it a handwheel K2 and a spur gear Nt.
146 MECHANICAL MOVEMENTS
This spur gear is connected with ratchet wheel Bt by a tumbler
gear arrangement controlled by lever /s, which thus provides
for reversing and disengagiog the feeding movement. The
ratchet wheel is operated by a pawl 0%^ pivoted to lever Gt,
which, in turn, receives its movement from rockshaft Ft. This
movement is positive in the direction which operates the ratchet
wheel Htf and through it the cross feed. In the other direction,
motion is derived from a spring Rt until the point of plunger 5s
brings up against the adjustable stop Tt. As the position of
T2 governs the extent of the movement of the swinging of lever
Gt, a greater or less cross feed is effected at each stroke. The
position of stop Tt, and the amount of feed, is governed by two
things. In the first place, the knurled nut Ut furnishes a check
to its backward movement, and thus regulates the rate of cross
feed. Screwing this nut out increases the feed — screwing it
back decreases it. In the second place, the feed is controlled by
cam Vt, which is adjustably clamped on the shaft of ratchet
wheel Btf and revolves with it in the direction of the arrow.
As the feeding progresses, the lower edge of Vt comes into con-
tact with the left-hand end of stop Tty gradually limiting its move-
ment from that permitted by the adjustment of Ut until finally,
in the position shown, the swinging of lever Gt is stopped alto-
gether, thus stopping the cross feed. The diminishing depth
of cut thus provided for, as the desired finished diameter is ap-
proached, tends to improve the work in regard to accuracy and
finish.
It will be noted in the plan view that there are three stop cams
Vt, three stops Tt, and three feed adjusting nuts Ut and plungers
St. Any one of these three latter may be pressed down into
working position, thus giving a separate cross-feed stop and rate
of feed for each of three operations.
Intermittent Gearing. — When a shaft which rotates con-
tinuously is to transmit motion to another shaft only at pre-
determined intervals, intermittent gearing is sometimes used.
Gearing of this type is made in many different designs, which may
be modified to suit the conditions governing their operation, such
as the necessity for locking the driven member while idle, the
INTERMITTENT MOVEMENTS
147
inertia of the driven part, or the speed of rotation. With
some forms of intermittent gearing, the driven gear rotates
through a fractional part of a revolution once for each revolution
of the driver, whereas, with other designs, the driving gear
transmits motion to the driven gear two or more times while
maldng a single revolution. The number of times that the
driven gear stops before it is turned completely around is varied
Fig. 7. Gears for Uniformly Intermittent Motion
in each case according to the requirements; the periods of rest
may also be uniform or vary considerably.
Gears for Uniformly Intermittent Motion. — The design of inter-
mittent gearing illustrated by diagram A , Fig. 7, is so arranged
that the driving gear, which has only one tooth, revolves four-
teen times for each revolution of the driven gear. Each time
the tooth of the driver engages one of the tooth spaces in the
driven gear, the latter is turned through an arc a. The driven
gear is locked against rotation when the driving tooth is not in
mesh, because the circular part of the driver fits closely into the
concave surfaces between the tooth spaces as they are successively
148 MECHANICAL MOVEMENTS
tiimed to this position. The radius of the driver should be
small enough to insure adequate locking surfaces between the
tooth spaces, but not so small that sharp weak points will be
formed at the edges of the tooth spaces. Counting mechanisms
are often equipped with gearing of this general type. In order
to vary the relative movements of the driving and driven gears,
the meshing teeth may be arranged in various ways. For in-
stance, if a second tooth were added to the driver on the opposite
side as indicated by the dotted lines, the driven gear would
receive motion for each half revolution of the driver. The dia-
gram at B illustrates another modification. In this case, the
driven gear has a smaller number of rest periods, and it is
turned farther for each revolution of the driver, as the latter
has three successive teeth.
Variable Intermittent Motion from Gearing. — With some
forms of intermittent gearing, the driven gear does not move the
same amoimt each time it is engaged by the driver, the motion
being variable instead of uniform or equal. The diagram A,
Fig. 8, shows an example of the variable motion intermittent
type. The driving gear has four driving points around its
circumference with nimibers of teeth at each place varying from
one to four. The tooth spaces on the driven gear are laid out
to correspond so that the motion received by the driven gear
is either increased or decreased progressively depending upon •the
direction of rotation of the driver. Gearing of this general
type may be arranged in many diflFerent ways and is designed to
suit the particular mechanism of which it forms a part. After
laying out gears of this kind, it is often advisable to make brass
templets in order to ascertain by actual experiment if the gears
are properly formed and give the required motion.
Intennittent Gearing for High Speeds. — The design of gearing
illustrated by diagram B, Fig. 8, is considered preferable to the
forms previously described, where the driving member revolves
at a comparatively high speed. With this gearing, the driven
member is stationary during one-half revolution of the driver.
The latter has a stud a or roller which engages radial slots in the
driven gear while passing through the inner half of its circle of
INTERMITTENT MOVEMENTS
149
travel. The fiat spring illustrated at c is used to hold the driven
wheel in position so that the driving roller will enter the next
successive slot without interference. The projections or teeth
on the driven gear may have semi-circular ends as shown, or all
of the ends may be concentric as indicated by the dotted line at
b. If the semi-circular ends are not provided, there should be
some form of positive locking device to insure alignment between
the radial slots and the driving pin or roller. The comers
should also be roimded to facilitate engagement of the roller.
Fig. 8. (A) GMrinc for Variable Intermittent Motion; (B) Higfa-epeed
Intermittent Gearinc
Another form of intermittent gearing designed to eliminate
shocks when operating at relatively high speeds is illustrated in
Fig. 9. The speed ratio between the driving and driven members
is 4 to I, each revolution of the driver turning the driven wheel
one-quarter revolution, or 90 degrees. The driver A has a cam
groove C which is so shaped that the motion of the driven wheel
B is gradually accelerated and retarded at the beginning and
end of its movement. This groove is engaged by rollers D on
the driven wheel. The rollers enter and leave the cam groove
ISO
MECHANICAL MOVEMENTS
through the open spaces at £, and when the driven wheel is
stationary, two of the rollers are in engagement with this groove,
thus efifectually locking the driven member. The illustration at
the left showb the driven wheel at the center of its movement,
and the view to the right shows the relative positions of the two
parts after the movement is completed. As the roller at Z> is
revolved 45 degrees from the position shown, the following roller
enters the cam groove through the left-hand space E.
Intermittent Motion of Moving Picture Projector. — A very
rapid intermittent motion is required on moving picture project-
Fig. 9. Anothtr Form of Oetring deiicned to Eliminate Shocks at
High Speeds
ors. The film is not moved continuously, but each view or posi-
tive on it is drawn down to the projecting position while the
shutter is closed, and the film remains stationary for a fractional
part of a second while the picture is exposed on the screen; then,
while the shutter is again closed, the next successive view is
moved to the projecting position. It is apparent, therefore,
that moving pictures are, in reality, a series of stationary pic-
tures thrown upon the screen in such rapid succession that they
are, in effect, blended together and any action or movement s^
pears continuous. It is important to give the film a very rapid
INTERMITTENT MOVEMOnrS 151
intermittent motion, because^ it is necessary to have the shutter
dosed when this movement occurs; and the length of time that
the shutter is dosed, should be reduced to a minimum. This
shutter is in the form of a wheel or disk, and it has a fan-shaped
section which passes the projector lens while the film is being
shifted. In order to avoid flicker on the screen, the shutter has
two additional fan-shaped sections. With these three equally
spaced sections, the light is not only shut off from the screen
during each successive film movement, but twice between each
movement at uniform intervals. By dosing the shutter twice
while the picture is on the screen, the flicker that would be visible
and annoying if the shutter were only dosed while moving the
film is multiplied to such an extent that it becomes almost con-
tinuous and is practically eliminated as far as the observer is
concerned, assuming that the projector is operated at the proper
speed. The width and area of that section of the shutter which is
passing the lens when the film is being moved is governed by the
time required for the film movement. Theoretically, the area
of each section or segment of the shutter should be equal, al-
though, in practice, the two extra sections are made of somewhat
smaller area than the main one, in order to increase the open space
and the percentage of area left for the passage of light.
There is an important relation between this shutter whed and
the intermittent motion or gearing of the projector. This is due
to the fact that the shutter must be dosed while the film is being
shifted. With the mechanism to be described, the film move-
ment is very rapid so that the shutter blades may be propor-
tionately reduced in area, thus leaving more open space for the
light. The intermittent motion referred to is shown in Fig. 10
and is used on the Power moving picture projector. This
mechanism is composed of a disk or wheel Aj having an annular
flange or ring Bj which has two diagonal slots across it as shown;
this whed, which is the driver, imparts an intermittent motion
to the follower H, which carries four equally spaced pins or
rollers that engage the ring B on wheel A. Each time this
wheel makes one revolution, the follower H is turned one-
quarter revolution and in the same direction, as indicated by
10 A
152
BIECHANICAL MOVEMENTS
the arrows. The follower is stationary except when it is engaged
by the slots or cam surfaces formed on one side of ring B. Dur-
ing this stationary period, the ring B simply passes between the
four pins on the follower, two of these pins being on the outside
and two on the inside of the ring.
The quarter-turn movement is obtained in the following
manner: When the projection or cam surface G on the revolv-
ing wheel A strikes one of the pins, the rotation of the follower
begins, and the pins are so spaced that one on the outside moves
through a diagonal slot in ring B while a pin on the inside moves
Fig. 10. Rapld-tctiiic Intermittent Oeuinf of Moving Picture Projector
outward through the other slot. For instance, if the pins C
and D are on the outside and E and F on the inside, pin D will
first be engaged by cam surface G and, as the follower revolves,
pin C will pass in through one diagonal slot while pin E is moving
to the outside of the ring through the other slot. At the com-
pletion of the quarter-turn movement, pins C and F will be on
the inside and D and E on the outside. As wheel A continues
to revolve, ring B simply passes between these closely fitting
pins which lock the follower against movement imtil projec-
tion G again comes aroimd and strikes the next successive pin
on the follower.
INTERMITTENT MOVEMENTS 153
The follower operates a toothed wheel or sprocket which con-
nects with the film and moves it downward each time the shut-
ter is closed. Above and below the intermittent gearing there
are other sprockets which rotate continuously, and these are so
timed that a loop of film is formed above the intermittent gearing
that is just large enough to provide for one film movement, which
is equivalent to the length of one view or positive. As the film
is drawn down rapidly by the intermittent mechanism, a loop
is formed below it which is taken up by the lower sprocket as
the film is wound upon the lower receiving reel. The normal
speed of wheel A is sixteen revolutions per second, and it has
been operated at two or three times the normal speed. The
time required for turning the follower one-quarter revolution is
approximately one-sixth of the time for a complete revolution,
or ^ second, when running at normal speed. With the Geneva
motion (illustrated in Fig. 12), which has been applied to many
projectors, approximately one-quarter of the time is required
for the intenoittent action; therefore, the shutter blades must
be of larger area than when the film movement occurs in one-
sixth of the time. Notwithstanding this increase of speed, the
mechanism shown in Fig. 10 is claimed to be superior to the
Geneva motion in that there is less tendency to subject the film
to injurious stresses. The locking of the follower during the
stationary period is also more secure, especially at the critical
time when near the operating point. The three holes drilled in
the ring B are to compensate for the slots on the opposite side
and to balance the wheel A.
Intermittent Gear with Swinging Sector. — The gearing illus-
trated in Fig. II operates on a different principle from the
gearing previously described. The driven gear has one period
of rest for each revolution of the driver ; the latter has a sector
B which is free to swing in the space provided for it, but is
normally held in the position shown by a spiral spring D. The
driver revolves at a imif orm speed in the direction shown by the
arrow and, when the sector B comes into engagement with the
driven gear, the latter stops revolving while the sector is swing-
ing across the open space or until side B strikes side F, when the
154 MECHANICAL MOVEMENTS
driven gear is again set in motion. As soon as the sector is
released by the driven gear, the spring draws it back to the
position shown in the illustration, preparatory to again arresting
the movement of E, The resistance to motion offered by gear
E should be great enough to overcome the tension of spring Dy
as otherwise the sector would not swing away from the position
shown. In order to avoid shocks, this gearing would have to be
revolved quite slowly; while the design is not to be recommended,
the principle may be of some practical value.
Geneva Wheel for Intermittent Motion. — The general type
of intermittent gearing illustrated in Fig. 12 is conmionly known
Fig. zz. Intermittent Motion derived from t Swinging Gear Sector
as the " Geneva wheel," because of the similarity to the well-
known Geneva stop used to prevent the over-winding of springs
in watches, music boxes, etc. Geneva wheels are frequently used
on machine tools for indexing or rotating some part of the ma-
chine through a fractional part of a revolution. The driven
wheel shown at il in the illustration has four radial slots located
90 degrees apart, and the driver carries a roller k which engages
one of these slots each time it makes a revolution, thus turning
the driven wheel one-quarter revolution. The concentric surface
b engages the concave surface c between each pair of slots before
INTERMITTENT MOVEMENTS
^SS
the driving roller is disengaged from the driven wheel, which
prevents the latter from rotating while the roller is moving
around to engage the next successive slot. The drailar boss b
on the driver is cut away at (f to provide a clearance ^ace for
the projecting arms of the driven wheel.
The Geneva wheel illustrated by diagram B differs from the
one just described principally in regard to the method of locking
the driven wheel during the idle period. The driven wheel has
Fig. I a. Genevt Wheels which Tary in regard to Method of Locking
Driven Member during Idle Period
four rollers g located 90 degrees apart and midway between the
radial grooves which are engaged by the roller of the driver.
There is a large circular groove e on the driver having a radius
equal to the center-to-center distance between two of the rollers
g, as measured on the center line xx. This circular groove en-
gages one of the rollers as soon as the driving roller h has passed
out of one of the grooves or radial slots. Each time the driver
makes one revolution, the two rollers on the center line xx are
engaged by the locking groove. The illustration shows the
iS6
MECHANICAL MOVEMENTS
driving roller about to enter a slot and the locking roller at the
point of disengagement. When the driven wheel has been
moved 90 degrees from the position shown, the roller which is
now at the lowest position will have moved around to the left-
hand side so that it enters the locking groove as the driving
roller leaves the radial slot.
When designing gearing of the general type illustrated in Fig.
12, it is advisable to so proportion the driving and driven mem-
bers that the angle a will be approximately 90 degrees. The radial
slots in the driven part will then be tangent to the circular
path of the driving roller at the time the roller enters and leaves
the slot. When the gearing is designed in this way, the driven
Fig. 13. Intermittent Gearing for Shafts et Right An^es
wheel is started gradually from a state of rest and the motion is
also gradually checked.
Intermittent Gearing for Shafts at Right Angles. — When
driving and driven shafts are at right angles to each other, in-
termittent gears which are similar to bevel gears in form, but
constructed on the same general principle as the spur gearing
illustrated in Fig. 7, may be employed. The smooth or blank
space on the driving gear for arresting the motion of the driven
member corresponds to the pitch cone and engages concave
locking surfaces formed on the driven gear. Owing to the
conical shape, Buch gearing is more difficult to construct than
the spur-gear type.
INTERMIITENT MOVEMENTS
IS7
A form of intennittent gearing for shafts at right angles to
each other but not lying in the same plane is illustrated in Fig.
13. The driving member is in the form of a cylindrical cam and
has a groove which engages, successively, the rollers on the driven
wheel. Diagram A shows the cam in the driving or operating
position, and at B the driven wheel is shown locked against ro-
tation during the period of rest. The locking action is obtained
by parallel faces on the cam which fit closely between the rollers
and are located in planes at right angles to the axis of rotation.
This mechanism was designed for a high-speed automatic ma-
chine requiring an accurate indexing movement and a positive
locking of the driven member during the stationary period.
Fig. 14. A Modliicfttioii of fh6 Type of Gearinx shown in Fig. 13
The gearing operated successfully at a speed of 350 revolutions
per minute, and it was because of the speed that this design
was used in preference to the Geneva-wheel type of gearing
previously described. The curvature of the operating groove
on the driving cam is such that the driven wheel is started slowly
and, after the speed is accelerated, there is a gradual reduction
of velocity. The driven wheel has no lost motion for any posi-
tion and the mechanism operates without appreciable shock or
vibration, and is practically noiseless.
Another form of intermittent drive for shafts located at right
angles but not lying in the same plane is illustrated in Fig. 14.
This mechanism operates on the same general principle as the
158 MECHANICAL MOVEMENTS
one just described, but differs in regard to the fotm of the driv-
ing member or cam. This cam B is attached to the end of the
driving shaft A and has an annular groove corresponding in
width to the diameter of the rollers on the driven wheel D
carried by shaft C. This onnnlnr groove is not continuous as
there are inclined tunings on both sides. When the cam re-
volves in the direction indicated by the arrow, the inclined sur-
face F pushes roller E over to the left, thus causing disk D to
turn; at the same time, roller Ei enters the opening on the op-
posite side and is pushed over to the central position by cam
surface G. This roller Ei remains in the groove until the cam
has made one revolution, thus lo(iing the driven wheel against
rotadon. This locking roller then passes out at the o|^x>^te
side and another roller is eng^ed by the groove. The ratio of
this gearing, which was used to provide a feeding movement on
an automatic machine, depends upon the number of rollers on
the driven wheel.
INTERMITTENT MOVEMENTS 159
Aiiziliary Locking Device for Intennittent Bevel Gears. —
The intermittent bevel gearing illustrated in Fig. 15 is provided
with auxiliary locking plates which regulate the motion of the
driven gear and hold it stationary while disengaged from the
driver. The driving gear is on shaft A and revolves continu-
ously. It is only provided with enough teeth to rotate the
driven gear and shaft B one-third revolution to one complete
revolution of the driver. This mechanism is used to actuate
feeding rolls requiring an intermittent motion. Formerly the
gearing was used without the locking device to be described,
but there were slight variations in the movements of the driven
shaft so that the gears did not always mesh correctly, which
caused them to break, and also interfered with the timing of
the feeding movement. These defects were eliminated by apply-
ing locking plates to the shafts A land B, one plate being located
just back of each gear. The plate on shaft B has three equally
spaced flat sides or edges and the plate on shaft A is cut away
to provide a clearance space for the protruding sections of the
plate on shaft B when this shaft is in motion. As the plan view
shows, the flat side of the plate on shaft B, during the idle peripd,
is intercepted by the plate on il so that the driven shaft is not
only locked but its motion is limited to one-third revolution for
eadi complete turn of the driving shaft.
Two-speed Intermittent Rotary Motion. — The fast and slow
motion of the pattern cylinder of a certain type of loom is de-
rived from the reversible intermittent gearing shown in Fig. 16.
The large gear A is moimted on the pattern cylinder shaft,
and receives its motion either through the segment gear and
crank combination B or through a similar combination C, these
two combinations being used to reverse the direction of rotation.
Gear D is the driver for this train of mechanism. Whether the
motion is transmitted from gear D to the pattern gear A through
the crank and segment gear combination B or through combina-
tion C depends upon the position of a sliding key F. An inter-
mittent fast and slow motion is obtained with either combination.
When key F locks the crank and gear B to the shaft, the pattern
wheel is rotated at a relatively slow speed when the segment
i6o
MECHANICAL MOVEMENTS
pinion is acting as the driver, and at a faster speed when the
crankpin E comes aroimd^nto engagement with one of the radial
slots in the pattern gear. When this direct drive is employed,
the gears G and E revolve idly with the upper crank and gear
combination C When a reversal of motion is required, sliding
key F is pushed in to engage gear H, which then drives gear G
and the combination at C.
Intermittent Feed Mechanism. — The solution of an interest-
ing problem in design is indicated in Fig. 17. The require-
ments were that for every one and one-quarter revolution of
Fig. z6. Two-tpeed Rerening lotermittent Geuiac
a continuously rotating shaft A a second shaft L in alignment
with the driving shaft must rotate intermittently, with equal
velocity and in the same direction as shaft A^ one-twelfth revolu-
tion or through an angle of 30 degrees. An eccentric bushing C
is keyed to the driving shaft A. A 96-tooth gear D is loosely
mounted on eccentric bushing C, but is prevented from rotating
by lever E; the pitch-line of gear D, however, is always tangent
to the pitch-line of the 120-tooth gear F and to that of the plan-
etary pinion G. This pinion is carried by a double arm B which
DJTERMITrENT MOVEMENTS l6l
is also keyed to the driviag shaft A. As ann B traverses the
pinion around gear D, gear F is revolved on shaft A in the ratio
of 130 to 96 or 1.35 to I. The end of arm B oi^x>^te the pinion
carries a link and roUer I which runs on a flange of gear F until
a depression in the periphery allows the roller to drop and permits
pawl E to engage ratchet wheel / which is keyed to shaft L\
each time the pawl engages the ratchet wheel, the latter is turned
forward until roll / runs up on top of the flange again. As gear F
advances one-fifth revolution for each revolution of the arm and
pawl, and since 30 degrees equals one-twelfth revolution, the
opening or depression for the roU must be shortened ^ X ^ of
30 degrees, or to 39J degrees.
Constant Intermittent Motion from Variable Motion. — The
feeding movement of a planer tool, which occurs at the end of
each return stroke, is derived from a shaft which revolves in
first one direction and then the other, the number of revolutions
depending upon the length of the stroke which is adjusted to
suit the work. The simple mechanism to be described makes it
possible to obtain the same rotary movement for operating the
feed-screw of the tool-slide, regardless of the number of revolu-
tions made by the shaft which drives the feeding mechanism.
l63 MECHANICAL MOVEMENTS
The arrangemeDt is such that a feed disk or crank at the end of
the driving shaft turns part of a revolution and then remains
stationary while the shaft continues to revolve.
One method of securing this fractional part of a turn and then
stopping the motion of the feed disk is illustrated at A in Fig. i8.
The link / connects the crankpin of the feed disk with a rack
which, through suitable gearing, transmits motion to the feed-
screw. The maia pinion shaft of the gear tr^ for driving the
planer table has attached to its end the cup-shaped casting a,
which forms one part of a friction clutch. The crank disk b has
flf. ig. M«ehaniamt for Deririnc u UnnuTliit Rotarr MorBmnit ham
a Drivliit Shaft regardlew ^ the Hunber of Kerolattona made bj Uie
Shaft
a hub c, which fits into the tapering seat in part a and forms the
other member of the clutch. If this friction clutch is engaged
when the planer is started, the crank disk b revolves until one of
the tapered projections d strikes a stationary taper lug, thus forc-
ing part c out of engagement with a ag^nst the tension of spring
e. The crank disk then remains stationary until part a and the
driving shaft reverse their direction of rotation at the end of the
stroke. This reversal of motion disengages the tapering surface
d or <fi, as the case may be, and allows the friction clutch to
regngage; the crank disk is then turned in the opposite direction,
until the other tapering projection strikes a seccmd lug which
INTERMITTENT MOVEMENTS 1 63
again stops the motion of the feed disk. This intermittent ac-
tion in first one direction and then the other is continued as
long as the planer is in operation, and the feed disk oscillates
through the same arc regardless of the length of stroke or the
nimiber of revolutions made by the driving shaft.
Another planer feed mechanism which operates on the same
general principle as the one just described is illustrated at J3,
Fig. 18. In this case, the hub g is keyed to the shaft and the
flange formed on this hub is between plates h and j. This
flange does not come directly into contact with the plates, as
there are leather washers on each side as indicated by the heavy
black lines. The plates h and j are held in contact with these
washers by three bolts / having springs imder the heads. The
hub g is sutroimded by a band which is split on the lower side
and has lugs n into which is fitted a pawl of such shape that,
when it strikes a fixed stop, the band is opened and released from
the hub. This releasing of the band occurs after the crank disk
has turned far enough to give the necessary feeding movement.
The crank is held in position while the driving shaft continues to
revolve, by the friction between plates h and j and the leather
washers previously referred to. When reversal occurs at the end
of the stroke, the hub g revolves in the opposite direction and
the band again grips it imtil the pawl of lug n strikes the oppo-
site stop.
Adjustable Intermittent Motion. — The intermittent feed
mechanism shown in Fig. 19 is so arranged that the intermittent
action may be varied according to requirements by means of a
simple form of " skipping " device. A pitman connecting with
crank B transmits an oscillating movement to lever A. This
lever carries a stud on its free or upper end upon which is pivoted
a fiber pawl C This pawl engages the smooth periphery of
disk D and turns the latter a fractional part of a revolution when
lever A is moving to the left, imless the engagement of the pawl
is prevented by the mechanism to be described. The pawl is
formed of two pieces attached to opposite sides of a diamond-
shaped block F. This block is within the slot and, being slightly
thinner than the bar, causes the projecting sides C to f rictionally
164
MECHANICAL MOVEMENTS
engage the lower side of the bax. Any motion of lever A towards
the right causes the pawl to turn to the position shown so that
it clears the disk D for the return stroke. The reverse motion of
lever A changes the position of block F so that the ends C grip the
disk Dj which is given the required feeding movement. The
skipping of the feed is accomplished by a train of change-gears
and a cam G. This cam serves to lift the pin H clear of its seat,
so that the bar carrying pawl C is free to slide horizontally as
lever A moves to the left; the result is that the pawl is not
Fig. 19, Feed Mechanism with SUpiiIng Device for Varying the
Intermittent Motion
turned by frictional resistance to the gripping position, and it
simply makes an idle stroke. The cam G is pushed in when it
strikes dog K and is suddenly thrown outward by a spring
after passing the dog; this sudden release disengages pin H
from its seat, into which it drops again upon the return of bar E.
The number of feeding strokes before an idle stroke are governed
by the ratio of the change-gears.
Automatic Variation of Intermittent Motion. — The mecha-
nism described in the following is somewhat complicated as it is
designed to turn a driven shaft through a small arc for every
INTERMITTENT MOVEMENTS 165
other revolution of the driving shaft and according to the fol-
lowing requirements: The feeding movement of the driven
shaft is to increase by small amounts imtil a maximum feed is
obtained; the feed then decreases to a minimum, again increases
to a maximum, and at this point instantly begins at the mini-
mum again. H a line is drawn representing tiiese movements
graphically, it will readily be seen that there are two periods of
increasing feed and one period of decreasing feed for every cycle
of movements. It -was necessary to derive the feeding motion
from a shaft nmning at twice the desired speed.
The principle upon which this mechanism operates is shown
partiy in diagrammatical form, in Fig. 20. The arm C carries
a sliding block D which is connected to lever L by a pitman K.
Block Z7 is fed to or from the center of B by screw £, working in
a divided nut. On the upper end of C are two intermittent mo-
tion star-wheels F and G, of six teeth each, with their planes at
right angles. Wheel F is pivoted on the side of C, and G is
fastened onto £. Wheel F has three projecting pins Fi, F2, and
Fs, placed on alternate teeth and denoted in the illustration by
black dots. Suppose star-wheel F is rotated one tooth (denoted
by the straight lines). If that tooth is one of the three with the
projecting pins on the side, wheel G and screw E will be rotated
one-sixth revolution. Conversely, if the tooth on F has no pro-
jecting pin, G will not rotate. This method gives the alternating
feed through K and L, as the arm C revolves about the center
of J5.
The center of F revolves about B in a path as shown by the
broken line, which passes midway between the two circles at H.
These circles represent the controlling star with six teeth or
points (denoted by straight lines). A pin (not shown) upon the
block D is caused to engage two teeth of ff , on two successive
revolutions before it is retracted. This is done only when the
slide is at the upper end of its travel. Star-wheel H merely
operates star F. Three projecting points (denoted by black dots)
engage point after point of F as it comes around. Suppose it is
projections Ex or Et that engage with F. Then, by reason of
their being on the outer side of the center of F, star-wheel F must
l66 MECHANICAL MOVEMENTS
revolve in an opposite direction to that in wliich it would re-
volve if Hi were the projection engaging F, because Hi is on the
inner side of the center path of F.
It is now apparent that block D moves up (or down) through
the action of H upon F and F upon G ; and the motion takes place
only for every other revolution of B. When block D reaches
the outer limit, the pin upon the blodt is released as mentioned,
which, in turn, revolves E two teeth before it is retracted, thereby
engaging the opposite side of F, reversing the direction of rotation
of F and G, and returning D toward the center. Pin Hi is now
brought into action and D goes outward again to the extreme
position. The controlUng star is rotated as before, returning
Hi to position and bringing Ht into action to open the split nut
at screw E, which allows a spiral spring in / to return the block
D and pitman K instantly to the center, thus completing one
cycle. Through link K, lever L, and pawl if, ratchet ^ is ro-
tated. A star N is carried by L, which is operated by the hinge
INTERMITTENT MOVEMENTS 167
tappet O and which is provided with three projecting pins to
lift the eccentric pawl from the ratchet every alternate stroke
of Z.
Automatic Indexing Mechanism. — The indexing or dividing
of circular work requiring equally spaced grooves milled across
the periphery may be controlled automatically by the dividing-
head illustrated in Fig. 21. In addition to the transverse and
longitudinal sections shown, there are three detail views which
illustrate important features. The mechanism for controlling
the indexing automatically derives its motion from a spindle L
driven through coupling W from a special pulley carried on a
bracket attached to the bed of the milling machine. The clutch
M (see detail view) on spindle L locks worm K to the spindle
when the worm is pressed against the clutch if by a spring
H, acting through rod / and finger J. This engagement with
clutch M occurs when lock-bolt B is withdrawn from plate C, so
that worm-wheel E is free to revolve. The movement of plate
C at each indexing is controlled by a counter mechanism con-
sisting of a dividing-plate C having teeth on the periphery which
engage the teeth of disk N, thus rotating stop-plate which
controls the engagement of lock-bolt B and the extent of the
indexing movement.
The table of the milling machine on which this mechanism is
used should be arranged to return automatically. When one
groove has been milled across the work, the table returns and,
when near the end of the return stroke, lock-bolt B is with-
drawn by a suitable mechanism (not shown in the illustration).
When this bolt is disengaged from dividing-plate C, the worm-
wheel E is free to revolve. The pressure of spring H forces rod
/, finger 7, and worm K to the left, the worm engaging dutch M
on spindle L which is constantly revolving. As worm K and
worm-wheel E revolve, rotary motion is transmitted to dividing-
plate C, and also to spindle G through epicyclic gearing con-
sisting of bevel pinions T mounted on pins U attached to part V
which is keyed to the spindle G. The indexing movement con-
tinues until bolt B enters one of the succeeding holes in plate C.
The movement of worm-wheel E is then arrested and the worm.
ZI»
i68
MECHANICAL HOVEUENTS
as it continues to revolve, disengages itself from dutcli M and
stops rotating. The dividing-plate C has a number of teeth c,
the number corresponding to the number of its holes. Whenever
this plate is set in motion, these teeth engage disk N and turn
Aotonutlc lodttziiic or DMdiAf MMhimlnD
the counter 0. A solid portion of this counter is thus placed
in front of lock-bolt B, which prevents the bolt from refingaging
with plate C until a rotation equal to the required number of
holes has been completed. One of the concave notches in
coimter O then releases bolt B which engages plate C The
INTERMITTENT MOVEMENTS 1 69
number of teeth in plates C and N and the notches in counter
O depend upon the number of divisions required. This dividing-
head may be used the same as the hand-operated design. The
hand-operated indexing movements, as well as the automatic
movements, are transmitted to spindle G through the train of
epicyclic gearing previously referred to.
Indexing Mechanism of Screw-slotting Machine. — The
automatic machine to which the indexing mechanism shown in
Fig. 22 is applied mills the screw-driver slots across the heads of
screws. The screws to be slotted are placed in a slowly revolving
hopper from which they are conveyed by a chute to the work-
holder or turret Jf , which, in turn, locates each successive screw
beneath the narrow cutter or saw, which mills the screw-driver
slot. The work-holding and cutter-feeding movements are
derived from a camshaft at the back of the maddne which is
connected with the main driving pulley through change gearing
so that the rate of operation may be varied to suit the size
of the work.
Fig. 22 is a plan view showiag the turret operating mecha-
nism. After a screw is released from the chute, it falls into the
position shown at A where it is held between a seat in bushing
B and spring C, which is attached to escapement lever D. This
escapement permits the blank to fall into position in the work-
holding turret and also holds the screw blank in place in bushing
jB. The lever D receives its motion from cam £ on a camshaft
at the rear of the machine, which is driven through change-
gears. At F is a vertical shaft extending down through the bed
of the machine, which is driven through bevel gearing from the
shaft on which cam E is mounted. This vertical shaft carries
a revolving arm G that strikes locking lever B pivoted at /,
and raises it from the slot in disk K in which it is seated. All of
these parts are shown by dotted lines, as they are located be-
neath the turret or work-holder of the machine. As arm G
continues its movement, it strikes against one of the teeth of
star-wheel L and revolves it one-sixth revolution. When this
indexing movement has been completed, locking lever H again
drops into a slot in K, thus locking the turret in position.
I70
MECHANICAL MOVEMENTS
The turret carries six equally spaced bushings By although
only one is shown in the illustration. The slotting saw (not
shown) is located on the side opposite bushing B and the screw
blanks, after being placed in the work-holder at A , are indexed
around to the saw by the intermittent action of the indexing
mechanism, which movement occurs after each screw-head is
slotted. As the screw blanks leave position A they are held
loosely in place in the bushings by guard N which may be ad-
justed in or out to
agree with the body
diameter of the screw
blank. As each screw
arrives at the operat-
ing position beneath
the slotting saw, it is
held firmly against its
seat in the bushings
by the inner end of
lever O. This lever
receives its motion
from the left-hand
face of cam E. This
cam does not bear
directly against the
end of the lever 0,
but acts through the
intermediate lever P
which is adjustable by
means of the thumb-
screw shown. It is thus possible to regulate the- pressure with
which bears against the work, the adjustment being varied
according to the size of the screw blank.
The slide carrying the slotting saw moves vertically and is fed
downward by a cam as each successive blank is located beneath
it. After the slot is milled, the saw is moved upward rapidly
by a spring action, and lever O releases the slotted screw which
drops through a chute and into a receptacle. If the screw blank
Fig. aa. AntomAtic Indezinc Mechanism of
a Screw-alotting Machine
INTERMITTENT MOVEMENTS 171
does not release readfly, the continued rotation of the turret
brings it into contact with the curved edge of the ejector 5.
Incidentally, the bushings B are provided with a number of
seats in their periphery so that, by simply turning these seats
outward, the bushings are adapted for holding screws of a number
of different sizes. The indexing mechanism is so arranged that
any inaccuracy which may occur is in a direction lengthwise of
the screw slots and not at right angles to the face of the saw,
so that the centering of the slot in the head of the screw is not
affected.
Combined Indexing and Locking Mechanism. — The auto-
matic indexing and locking mechanism illustrated in Fig. 23
was designed for a multiple-spindle automatic screw machine.
The motions of this machine are all controlled by cams on a
camshaft which transmits motion for indexing by means of a
chain and sprocket gearing. The sprocket wheel A on the cam-
shaft is directly connected by a chain with a sprocket wheel
fast to the spindle head B, Sprocket wheel A is normally loose
on its seat on cam C, but it is engaged with the cam for indexing
by means of a dog D contained in a slot in the cam. One end
of this dog is arranged to engage a recess inside the hub of sprocket
wheel A and the outer or projecting end is in position to be acted
upon by stationary cam E. Normally the dog D is out of en-
gagement with the sprocket wheel, but for the indexing move-
menty cam E throws the dog into engagement, thus revolving
the sprocket and the spindle head to a new position. As there
are five spindles in fhe head, in this case, the spindle head must
be revolved one-fifth revolution at a time. After the indexing
movement is completed, cam E disconnects the dog from the
sprocket automatically.
As it is necessary on machines of this class to locate the spindle
head very accurately each time it is indexed, some form of auxil-
iary locating and locking mechanism is employed. In this case,
the locking bolt is at G, and is forced into its seat by the spiral
spring shown. The action of the bolt is controlled by a lever
H and cam P. This cam allows the bolt to drop in place as soon
as the indexing motion is completed. The conical point of bolt
173
MECHANICAL MOVEMENTS
G engages a seat of corresponding form, in whichever plug K is
in position. These plugs are spaced equidistantly about the
periphery of the spindle head. The tapered seat for the end of
bolt G is formed partly in the plug K and partly in the bushing
J through which the plug passes, as indicated by the detailed
view. With this arrangement, the location of the spindle head
does not depend upon the closeness of the fit of the cylindrical
part of the locking bolt in bushing J.
Action tA an Adding Mechanism. — The adding mechanism
to be described is applied to a machine which is a typewriter
and adding machine combined. Wth this machine (the Ellis),
debit and credit accounts may be written down indiscriminately;
each set of items added, and the total amount printed beneath
each vertical column. The writing is done on the typewriter
in the regular way, and the figures are set up and printed with
the adding mechanism at the same time that the reading matter
is written. Two adding mechanisms or " accumulators " are
required, one being for the debit and the other for the credit
column. This machine may also be used in various other ways.
For instance, a list of items may be printed in a series of vertical
INTERMITTENT MOVEMENTS 1 73
columns and these columns added to obtain the total amount in
both horizontal and vertical directions; finaUy, these totals,
both horizontal and vertical, may be added together to obtain
the grand total. Discounts may also be reckonedy amounts may
be subtracted from each other, and many other operations per-
formed in connection with commercial work.
The adding keyboard is composed of nine vertical rows of nine
ke}rs each. The lower key of each row is nimibered one, the next
two, and so on up to nine. Of the nine vertical rows, the first
on the right is for units, the next, for tens, etc., or, since the reck-
oning is usually in dollars and cents, the first row is for cents, the
next, for dimes, and the succeeding rows, for dollars. Figs. 24 and
25 show diagrammatical sections through the machine along the
line of any one of the vertical rows of adding ke}rs, which are
shown at G. Other important parts of the mechanism are the
rack Ay the type sector F, by means of which the numbers are
printed on paper carried by roller i?, and the accumulator wheels
B, by which the addition is performed. These parts, as well as
the other moving mechanism shown, are duplicated for each one
of the nine rows of keys, there being nine racks, nine type bars,
nine sets of accumulator wheels, etc., in all.
The adding mechanism is operated by the movement of rack
A. This movement takes place under the influence of spring
whenever stop N is swung back as shown in Fig. 25 by the
operation of the handle of the machine. The length of the
movement which spring thus gives to rack A is determined
by keys G. If the figure $476.34 is set up on the keyboard,
for instance, key '' 4 " will be depressed in the cents coltunn,
and, when the movement of the rack takes place, the rack teeth
beneath the accumulator wheel will have moved four spaces.
This is more clearly seen in Fig. 24 where each of the keys
G is shown to be mounted on. a stem which carries a stop H at the
lower end. When the keys are depressed, these stops come
into line with corresponding steps formed at the left-hand end
of the rack A. These steps are so proportioned that when
key I is depressed, for instance, the rack is allowed to move one
tooth before striking its abutment. When key 2 is depressed.
174
MECHANICAL MOVEMENTS
INTERMITTENT MOVEMENTS 175
it moves two teeth and so on, as shown by the numbered arrows
at the lower part of the illustration. When no key is depressed,
indicating zero, then a stop is interposed which prevents any
movement of the rack. When key 9 is depressed, the rack takes
the full movement of nine teeth allowed by the striking of the
projections on the under side of the rack against supporting
bar/.
Each rack A has cut in it a slot engagmg pin C in sector D.
Each sector is, in turn, connected by link E with the type bar
F having nxmibers from o to 9. Whenever a key (key 4, for
instance) is depressed as shown in Fig. 25, and the rack is
allowed to move four teeth backward under the influence of
spring O, the type bar F is thereby set at the corresponding figure.
The throwing forward of lever L to which the type bar is pivoted
then prints this figure '' 4 " on paper wrapped about roll K.
It is important to remember that rack A and type bar F are posi-
tively connected under all conditions. It should, perhaps, be
mentioned that the teeth in sector D simply provide for more
accurate alignment of the type in printing than would otherwise
be possible. Just before the printing stroke takes place, arm
W swings up, carrying a plate which enters the corresponding
tooth space in each one of the nine sectors Z>, aligning all the
figures on type bars F and giving a good, evenly printed number
on paper.
The Accumulator Mechanism. — The accumulator mechanism,
by means of which the adding is done on the machine pre-
viously referred to, will now be described. There are ordinarily
nine accimiulator wheels for each of the nine racks. This par-
ticular machine, however, has two sets of nine wheels each, one
set being above rack A (see Fig. 25), and the other below it.
The upper one is the debit accumulator for addition in the
debit column and the other is the credit accumulator for the
credit column. Only the upper or debit accumulator will now
be considered. This set of nine accumulator wheels, of which
only one is shown at B, may be swimg into and out of engage-
ment with the teeth of racks A, at will. These accumulator
wheek have 20 teeth each; they could have ten, except for the
176
MECHANICAL MOVEMENTS
INTERMITTENT MOVEMENTS 1 77
fact that it would make them inconveniently small. Each
wheel is provided with a two-tooth ratchet M positively pinned
to it. This ratchet spans ten of the wheel teeth between its
points. Pawl P is adapted to engage the teeth of ratchet If,
and is connected with the mechanism by means of which the
tens are carried from one column to another (that is, from one
accumulator wheel to another) as will be described later.
Order of Operations for Adding. — Figs. 26 and 27 show, in
diagrammatical form, the method of procedure followed in the
simple problem of adding 4 to 9, and obtaining the simi 13. At
A J Fig. 26, the machine is shown " clear," that is, with the ac-
cumulator wheels at zero, which means that one tooth of the
two-tooth ratchet is up against the hook of the pawl. Key 4,
corresponding to the niunber to be added, in this case, into the
accumulator wheel, is now depressed and the operating handle
of the machine is pulled over. The first thing that takes place
is that the rack is allowed to move four teeth to the right, as
shown at B (see also Fig. 25). In this position, the nimiber '' 4 "
is printed. Next (as shown at C in Fig. 26) the mechanism
automatically throws the accmnulator wheel down into engage-
ment with the rack. Then as the operator allows the handle
to return, the rack moves back to the zero position again as
shown at D, carrying the accumulator wheel with it a space of
four teeth from its zero position. The mechanism then disen-
gages the accimiulator wheel, leaving the machine ready for the
next operation with the 4 added into the accmnulator, as shown
at£.
To add 9 to the 4, key 9 is depressed and the operator pulls the
handle. This results in a movement of nine teeth of the rack
as shown at F in Fig. 27. The figure 9 is then printed. The
accmnulator wheel is next engaged, as at G. Then the rack is
returned to the zero position as at H^ and the accimiulator wheel
is disengaged as at /. This evidently moves the accumulator
wheel 9 + 4 = 13 teeth as shown at H. In doing this, one of
the teeth of the two-tooth ratchet lifts the pawl as it passes under
it. This raising of the pawl operates a spring-loaded mechanism,
which shifts the next accumulator wheel (that for the tens col-
178
MECHANICAL MOVEMENTS
umn) one tooth, when the wheels are returned from engagement
in operation /. This operation corresponds to that of " carry-
ing " when adding with pendl and paper, except that it is done
automatically. This carrying mechanism will not be described
in detail as the parts are small and rather complicated, although
o
3
o
o
<
o
o
o
<
a
z
<
cc
a.
Q
z
<
a.
D
»-
U
CO
A^
MACHINE CLEAR,
ACCUMULATOR
^WHEEL AT ZERO
B<
PRESS KEY "4,"
MOVE RACK TO
POSITION, AND PRINT
f ENGAGE ACCU-
MULATOR WHEEL
D^
RETURN RACK TO
ZERO POSITION, AND
ADD 4 INTO ACCU-
MULATOR WHEEL
DISENGAGE ACCU-
MULATOR WHEEL
Fig. 36. Diagrams illnstrating Principle GoTerniiig Action of Adding
Mechanism
the action is simple. The mechanism may be understood more
clearly by considering the actions of the wheels when every one
of them in the accumulator, from cents up to the millions of
dollars, is set at 9 — that is, when they are set up for 9,999,999.99.
Now suppose that one cent is added, so that the first wheel is
INTERMITTENT MOVEMENTS 1 79
moved beyond 9 — that is, to o. The tooth of the ratchet M
will then pass under the first pawl, raising it. When the ac-
cumulator wheels return from engagement, this raising of the
first pawl releases a spring-loaded mechanism which moves the
next wheel from 9 to o. This, in turn, moves the next wheel from
9 to o and so on until each one of the row has been advanced one
tooth, setting the whole row at 0,000,000.00. This operation is
done so rapidly that one cannot distinguish between the suc-
cessive operations, but each one is dependent upon the preceding
one. The operations required for finding a total are shown at
7, Kj Lj and If, Fig. 27. The first thing the operator does is to
depress the " credit total *' key at the left of the keyboard, the
simi having been added into the upper or credit accumulator.
He then pulls the operating handle, and the accimiulator wheels
are engaged with the racks as shown at J. The next operation
is the release of the racks so that the springs move them toward
the right. There are, in this case, no keys depressed in the key-
board, so that the racks would move the full distance of nine
teeth, were it not for the fact that they have to carry the ac-
cumulator wheels with them, and the ratchets on these wheels
come in contact with the pawls, thus arresting their movement
and stopping the movement of the racks.
The previous operation of adding 9 to the 4 in the wheel set
the " units wheel *' three teeth beyond the point of the ratchet,
and the " tens wheel," one tooth beyond the point of the ratchet.
It is evident, then, that in operation K the units rack will be
allowed to move three teeth and the tens rack one tooth. This
will evidently set up the imit type bar at " 3 " and the tens type
bar at " i." On the return of the handle, the printing mecha-
nism is operated, transferring the total " 13 " to the paper. The
accmnulator wheel will then be released, and the rack will be
allowed to return to the zero position as shown at M. This
leaves all the acciunulator wheels back in the zero position, with
the teeth of the ratchets back against the pawls, leaving the ma-
chine " dear " and ready for the next operation.
It might have been desired to print a sub-total instead of a
total; that is, a total for the addition as far as it had proceeded.
i8o
MECHANICAL MOVEMENTS
flC
o
o
o
<
o
o
a
<
a
z
<
0»
H
Z
s
Q.
O
z
<
Q.
3
UJ
CO
PR&88 KEY "9,"
F < MOVE RACK TO
^POSITION, AND PRINT
°i
fENQAQE ACCU-
MULATOR WHEEL
CAARY 10
H
RETURN RACK TO
ZERO, ADD 9 TO 4
IN ACCUMULATOR WHEEL
«18 (OR 8 AND CARRY 10)
rOlSENQAQE ACCU-
IMULATOR WHEEL
O
I-
3
O
O
<
111
z
H
-I
o
<
<
I-
O
I-
a.
{ENQAQE ACCUMULATOR
WHEELS FOR TOTAL
f MOVE RACK TO POSI-
TION AQAINST ACCU-
MULATOR WHEEL STOP,
>ND PRINT TOTAL (18)
r DI8ENQA0E ACCU-
MULATOR WHEELS
I AT ZERO POSITION
H
RETURN RACK TO
ZERO POSITION,
MACHINE CLEAR
Fig. 37* Continiuitbn of Diagrams illnstrating Operation of Adding
Mechaniim
INTERMITTENT MOVEMENTS l8l
but not to dear the machine, thus permitting more figures to be
set up and printed and added into the same sum. Sub-totals
can be printed at any point in the adding up of a line of figures,
as required, by a simple change in the operation shown at 7, K,
L, and M in Fig. 27. This consists simply in allowing the
wheels to remain in engagement at L, so that the racks, when
they return in operation Jf , will bring the wheels to the same
position as they liad in /, thus leaving the totals still set up in the
accumulator. Since there are two independent accumulators, it
is evident that a nimiber can be added into either one or both of
them; or a total or sub-total can be taken from one of them and
added into the other — all depending upon the manipulation of
the keys and the time of throwing the accumulator wheels into
and out of action.
This adding machine has what are known as '' controlling keys."
These are named " non-add," " debit add,'^ " debit sub-total,"
" debit total," " credit add," " credit sub-total," " credit total,"
" repeat," and " error." The pressing down of the non-adding
key permits the printing of a nimiber without adding. In other
words, this keeps the accumulators permanently out of engage-
ment with the racks. The debit and credit add keys permit a
niunber to be printed and added into the corresponding accumu-
lator, even though the carriage is not set in the proper position
for that accumulator. The use of these keys, therefore, gives
a flexibility to the machine which is necessary for special oper-
ations such as horizontal adding. The debit and credit sub-
total keys take and print a total from either the debit or credit
accumulators without clearing the accumulators. The debit
and credit total keys, on the other hand, take the total from
either the debit or credit acciunulators, as the case may be, and
clear the acciunulator after the total is printed. The pressing
down of the repeat key holds in the downward position which-
ever of the number keys have been depressed, allowing the
same nimiber to be repeatedly printed and added as many
times as the operating handle is pulled. This is useful in
multiplying by repeated additions and for other similar uses.
The pressing of the error key will release every other key on
l82
MECHANICAL MOVEMENTS
the keyboard, both of the number keys and of the (grating
keys as well.
The keyboard is provided with an interlocking mechanism
connected with the controlling keys of the machine and with the
operating lever. This mechanism, among other things, pre-
vents the keys from being pressed down or changed after the
operating lever movement is started. The keyboard also has a
connection with an error key, the pressing of which releases all
the keys that may be depressed at the time. Means are also
! Ic
\
J-^-
•
^~\2
^ Ti
. .
Fig. a8. Flying Lever Coimectioii between Openkting Shaft and
AccomulatorB of Adding Mechanism
provided for automatically releasing and returning the keys
after each operation.
Accumulator Controlling Mechanism. — The engagement of
the accmnulators with the racks, and their release, in the oper-
ation of the adding mechanism previously described, is effected
as follows: The sector K (see Fig. 28) is directly connected with
the operating shaft L controlled by the operating handle. It
is provided with connections with both accumulators, although
this illustration only shows the connections with the debit ac-
cumulator. Flying lever M is connected with the debit ac-
cumulator by means of links 0\ and bellcrank Q. Member
INTERMITTENT MOVEMENTS 183
P IS simply a spring detent to locate Q for either the engaged or
disengaged position of the accumulator wheels.
As sector K starts on its stroke toward the dotted position,
flying lever M is carried with it, owing to the resistance which
the end of the latter meets with against abutment R, When
K has gone far enough so that the end of the lever has dropped
oflf R, the lever M becomes free. The movement has been
sufficient, however, to move accumulator lever Q to position Qx
which throws the wheels into engagement. If it had been de-
sired to throw the wheels into engagement at the end of the
stroke instead of at the beginning, detent R would have been
withdrawn from the position sho^n, leaving flying lever M free.
Near the end of the stroke of K^ however, the end of the pawl S
would have struck stud T, making M and K solid, for all prac-
tical purposes, and moving Q to the position Q\ at the end of the
stroke. If it had been desired to keep the accumulator wheels
out of engagement altogether, R would have been lowered out
of the position shown, and S would have been moved to a posi-
tion dear of stud T. Then flying lever M would have been
entirely free of Ky and no movement of Q would have taken place.
The provisions for throwing the accumulator out of engagement
at either the commencement or end of the return stroke are
similar to those just described.
ISA
CHAPTER Vn
ERRSGULAR MOTIONS
Many machine parts require either an intermittent or an ir-
regular motion instead of moving continuously or at a xmiform
velocity. The most common method of obtaining an irregular
motion is by means of cams which have grooves or surfaces of
such shape or form that the required motion is imparted to the
driven member when the cam is in motion. The exact move-
ment derived from any cam depends upon the shape of its oper-
ating groove or edge which may be designed according to the
motion required.
Cams may be classified according to the relative movements of
the cam and follower and also according to the motion of the
follower itself. In one general class may be included those cams
which move or revolve either in the same plane as the follower
or a parallel plane, and in a second general class, those cams
which cause the follower to move in a different plane which or-
dinarily is perpendicular to the plane of the motion of the cam.
The follower of a cam belonging to either dass may either move
in a straight Ijne or receive a swinging motion about a shaft or
bearing. The follower may also have either a imiform motion
or a uniformly accelerated motion. The working edge or groove
of a uniform motion cam is so shaped that the follower moves at
the same velocity from the beginning to the end of the stroke.
Such cams are only adapted to comparatively slow speeds, owing
to the shock resulting from the sudden movement of the follower
at the beginning of the stroke and the abrupt way in which the
motion is stopped at the end of the stroke. If the cam is to
rotate quite rapidly, the speed of the follower should be slow at
first and be accelerated at a imiform rate xmtil the maximum
speed is attained, after which the motion of the follower should
be xmiformly decreased until motion ceases, or a reversal takes
184
IRREGULAR MOTIONS 185
place; such cams are known as '' uniformly accelerated motion
cams."
Plate Cam. — Several different forms of cams are shown in
Fig. I. The form illustrated at il is commonly called a '^ plate
cam," because the body of the cam is in the form of a narrow
plate, the edge of which is shaped to give the required motion to
the follower. This follower may be mounted in suitable guides
and have a reciprocating motion (as indicated in the illustration)
or it may be in the form of an arm or lever which oscillates as
the cam revolves. When the follower is in a vertical position
as shown, it may be held in contact with the cam either by the
action of gravity alone or a spring may be used to increase the
contact pressure, especially if there are rather abrupt changes
in the profile of the cam and the speed is comparatively fast.
Positive Motion Cam. — The cam illustrated by diagram B,
Fig. I, is similar to the type just described, except that the roller
of the follower engages a groove instead of merely resting against
the periphery. Cams of this general form are known as '' face
cdms " and their distinctive feature is that the follower is given
a positive motion in both directions, instead of relying upon a
spring or the action of gravity to return the follower. The fol-
lower, in this particular case, is in the form of a bellcrank lever
and is given an oscillating motion. One of the defects of the
face cam is that the outer edge of the cam groove tends to ro-
tate the roller in one direction and the inner edge tends to
rotate it in the opposite direction. A certain amount of clear-
ance must be provided in the groove and, as the roll changes
its contact from the inner edge to the outer edge, there is an in-
stantaneous reversal of rotation which is resisted, due to the
inertia of the rapidly revolving roll; the resulting friction tends
to wear both the cam and the roll. This wearing action, however,
may not be serious when the cam rotates at a slow speed. If
the speed is high, there is also more or less shock each time the
follower is reversed, owing to the clearance between the roller
and the cam groove.
- Plate Cam arranged for Positive Motion. — In order to
avoid the defects referred to in connection with the face cam,
!iC£CHA24ICAL UOVEMEMTS
FIf. I. DiSeimt TypM o( Caai
the follower of a plate cam is sometimes equipped with two
rollers which operate on opposite sides of the cam, as shown at
C, Fig. 1. With such an arrangement, the curve of the cam for
moving the follower in one direction must be complementary to
the curve of the remaining half of the cam, since the distance
between the rollers remains constant. In other words, this cam
may be designed to give any motion throughout i8o degrees of
IRREGULAR MOTIONS 187
its movement, but the curvature of the remainmg half of the
cam must correspond to that of the first. When a cam is laid
out in this way, the distance between the sides as measured along
any center line, as a,t xx or yy, is constant and represents the
distance between the rollers of the follower. For this reason,
the term constant diameter cam is sometimes applied to this class
which is adapted for heavier work than the grooved face cam
illustrated at B. The follower or driven member is slotted to
receive the camshaft, and this slot acts as a guide and keeps
the rollers in alignment with the center of the cam.
Return Cam for Follower. — When the curvature of one-half
of a cam does not correspond to the curvature of the other half,
a special return cam is necessary, if the follower is equipped with
two rollers in order to secure a positive drive. A main and re-
turn cam is illustrated at D, Fig. i. The main cam may be laid
out to give any required motion for a complete revolution of
360 degrees, and the return cam has a curvature which corre-
sponds to the motion of the return roller on the follower. After
the main cam is laid out to give whatever motion is required,
points as at a, b, c, d, etc., are located on the path followed by
the center of the roller, and, with these points as centers, the
points e, /, gy and h are located diametrically opposite, and at a
distance equal to the center-to-center distance between the rollers.
These latter points lie in the path followed by the center of the
return roller, and by striking arcs from them having a radius
equal to the roller radius, the curvature or working surface of
the return cam may be laid out. One method of arranging these
two cams is to place the follower between them and attach the
rollers on opposite sides of the followers. The camshaft, in
some cases, carries a square block which is fitted to the elongated
slot in the follower to serve as a guide and a bearing surface.
Yoke Type of Follower. — Another form of positive motion
cam is shown at E, Fig. i. In this case, the follower has a sur-
face which is straight or tangential to the curvature of the cam.
With a follower of this kind, there is a limitation to the motion
which can be imparted to it, because, when the contact surface
is flat or plane, it is evident that no part of the cam can be con-
l88 MECHANICAL MOVEMENTS
cave "since a concave surface could not become tangent to the
straight face of the follower, and even though the follower is
curved or convex any concave part of the cam must have a radius
which is at least as great as the radius of any part of the follower.
The type of cam shown at £, like the one illustrated at C, can
only be laid out for a motion representing i8o degrees of cam
rotation; the curvature of the remaining half of the cam must
be complementary to the first half or correspond to it. The
follower of the cam shown at E has a dwell or period of rest at
each end of its stroke, the parts x and y being concentric with
the axis of the camshaft This general type of cam has been
used for operating light mechanisms and also to actuate the
valves of engines in stem-wheel river steamers.
Inverse Cams. — On all of the cams previously referred to,
the curved surface for controlling the motion has been on the
driving member. With a cam of the inverse type, such as is
shown at F (Fig. i) the cam groove is in the follower and the
roller which engages this groove is attached to the driving mem-
ber. The motion of this cam can be laid out for only i8o de-
grees of movement. The inverse type of cam is used chiefly on
light mechanisms, the particular cam iQustrated at F being
designed to operate a reciprocating bar or slide. The curved
part of the slot in the follower has the same radius as the path of
the driving roller, and serves to arrest the motion of the slide
momentarily. The well-known Scotch yoke or slotted cross-
head is similar to an inverse cam having a straight slot that is
perpendicular to the center line of the follower. (The motion
obtained with the Scotch yoke and its practical application is
referred to in Chapter HI.)
Wiper and Involute Cams. — The form of cam shown at G,
Fig. I, is simply a lever which has a curved surface and operates
with an oscillating movement through an arc great enough to
give the required lift to the follower. A cam of this kind is
called a " lifting toe " or a " wiper " cam, and has been employed
on river and harbor steamboats for operating the engine valves.
Many involute cams are somewhat similar in form to the type
illustrated at G, and they are so named because the cam curve
IRREGULAR MOTIONS 189
is of involute fonn. Such cams are used on the ore crushers
in stamp mills. Several cams are placed on one shaft and as
they revolve the rods carrying the stamps are raised throughout
part of the cam revolution. Disengagement of the cam and
follower then causes the latter to drop.
Cams having Rectilinear Motion. — Some cams instead of
rotating are simply given a rectilinear or straight-line motion.
The principle upon which such cams operate is shown by dia-
gram Hy Fig. I. The cam or block k is given a reciprocating
motion in some form of guide, and one edge is shaped so as to
impart the required motion to the follower I. An automatic *
screw machine of the multiple-spindle type is equipped with a
cam of this general type for operating side-working tools, the
tool-slide receiving its motion from the cam which, in turn, is
actuated by the turret-slide. This type of cam is also applied
to an automatic lathe for operating the radial arm or tool-holder.
Cams for Motion Perpendicular to Plane of Cam. — The
cams previously referred to all impart motion to a follower
which moves in a plane which either coincides with or is parallel
to the plane of the motion of the cam. The second general
dass of cams previously referred to, which cause the follower to
move in a plane usually perpendicular to the plane of the motion
of the cam, is illustrated by the design shown at /, Fig. i. This
form is known as a " cylinder " or " barrel " cam. There are
two general methods of making cams of this type. In one case,
a continuous groove of the required shape is milled in the cam
body, as shown in the iQustration, and this groove is engaged
by a roller attached to the follower. Another very common
method of constructing cylinder cams, especially for use on auto-
matic screw machines, is to attach plates to the body of the cam,
which have edges shaped to impart the required motion to the
follower. When a groove is formed in the cam body, it should
have tapering sides and be engaged by a tapering roller, rather
than by one of cylindrical shape, in order to reduce the friction
and wear.
Automatic Variation of Cam Motion. — Ordinarily the motion
derived from a cam is always the same, the cam being designed
190
MECHANICAL MOVEMENTS
and constructed especially for a given movement. It is possible,
however, to vary the motion, and this may be done by changii^
the relative positions of the driving and driven members by some
auxiliary device. This variation may be in the extent or magni-
tude of the movement or a change in the kind of motion derived
from the cam. The cam mechaoism shown at A ia Fig. 2 is so
arranged that every other movement of each of the two followers
is varied. The bellcrank levers a and b, which are the followers,
have cam surfaces on the lower ends, and they are given a
nc- >• Medunluiu loi Vuyliic Uotloit Honully d«rlT«d from Cams
swinging motion by rolls d and e pivoted to arm c which revolves
with the shaft h seen in the center of the arm.
The requirements are that each lever have first a uniform
motion and then a variable motion; it is also necessary to have a
change in the variable stroke imtil twelve strokes have been
completed, when the cycle of variable motions is repeated. For
instance, every other vibration of each lever is through a certain
angle, and for twelve alternate vibrations the stroke is changed
from a maximum to a minimum, and vice versa, the angle of
the uniform vibration bdng the mean or average movement
for the variable strokes. The uniform vibration is obtEuned
when roll d engages the cam surface on either lever a or b, and
IRREGULAR MOTIONS 191
the variable movement is derived from roll e on the opposite end.
This roll is moimted eccentrically on bushing / which is rotated
in its seat by star-wheel g, one-twelfth revolution for each revo-
lution of arm c\ consequently, the roll is moved either toward or
away from the axis of shaft A, thus varying the angle of vibration
accordingly.
Another mechanism which serves to vary the motion derived
from a cam surface is shown at £ in Fig. 2. This mechanism
is used in conjxmction with the one previously described. A
motion represented by the curvature / of a plate cam is repro-
duced by the upper end of the rod or lever q. One movement of
the rod end is an exact duplicate of the cam curvature, and this
movement represents the mean of a cycle of twelve movements,
each of which is a reproduction of the curvature on an increasing
or diminishing scale from maximum to minimum, or vUe versa.
The lever returns to the starting position with a rectilinear or
straight-line motion. The lever is given a reciprocating move-
ment by crank j and connecting link k. The roll s at the lower
end of the lever is kept in contact with cam surface / by spring t.
The lever q is fulcrumed and slides in the osdUating bearing m
which is supported- by the slotted cross-head n. This cross-head
is operated by roll which is carried by a crankpin on a twelve-
tooth ratchet wheel p. When the mechanism is in action, the
crank j throws connecting link k out of line with lever q and the
resulting tension on spring / causes roll s to follow the outline or
curvature / of the cam until the upper end of the travel is reached;
then the connecting link k is thrown out of line with lever q in
the opposite direction, which causes spring t to force roll s
against the straight return guide r. For each revolution of the
crank, a pawl turns the ratchet wheel p one tooth, so that the
slotted cross-head n and the bearing m are gradually raised and
then lowered. As the result of this upward and downward move-
ment of bearing m, which is the fulcrum for lever 9, the motion
is increased and then diminished the desired amoimt.
Varying Dwell of Cam Follower. — The mechanism illustrated
in Fig. 3 is for varying the dwell of a cam follower or the length
of time it remains stationary. The cam A lifts lever B during
193 MECHANICAL MOVEMENTS
three-fourths of a revolutiott, and during the dwell the follower
B is held up by the latch C. This latch is controlled by pawl D,
cam E, and spring F. The cam E has ratdiet-shq>ed notches
in its edge and is made integral or in one piece with a twenty-
four-tooth gear G. The ratchet and gear are revolved upon the
hub of a twenty-five-tooth stationary gear H, by the planetary
pinion K, once for every twenty-four revolutions of cam A.
With this particular mechanism, the lever B is given a dwell of
90 degrees for the first revolution; thereafter the dwell increases
360 degrees after each rise of the follower, imtil the fourth period
Pig. 3. Airaiit«meiU for Vuj>ia( Dwell of Cmh PoUoww
(which ^ves 1530 degrees dwell) when the dwell decreases until
it is again 90 degrees; that is, during the fourth period the rise
occurs while the cam makes three-fourths revolution, and then
there is a dwell equivalent to 4} revolutions. Twenty-four
revolutions are required to complete a cycle of movements.
When milling the teeth in cam E, the index-head was arranged
for twenty-four diviaons, but teeth were cut only at the follow-
ing divisions: 1-2-4-7-11-16-20-33. When the mechanism is
in use, latch C is disengaged whenever pawl D enters a notch
in cam E, thus allowing lever B to drop suddenly.
Automatic Variation of Cam Rise and Drop. — The q>ecial
design of cam illustrated m Fig. 4 normally has a i20H]e^;ree
□tSEGULAR MOTIONS
193
rise, a 60-degree dwell, a 90-degree drop, and a 90-degiee dwell.
In the operation of the machine to which this cam was f^plied,
howevei, it was necessary to vary the motion derived from the
cam in acc<mlance with the pressure exerted upon a certain
part of the machine; for instajice, if the pressure exceeds a
given limit diuing a dwell, the rise must take place in 90 degrees
instead of 120 degrees; whereas, if the pressure decreases below
the desired amount, the drt^ must be lengthened to lao degrees.
The mechanism for automatically varying the cam motion is
comparatively ^mple, as the illustration indicates.
The main cam A carries two auxiliary cams B and C. These
cams are driven by pins, which pass through them as shown by
the sectional view, and they are free to slide upon these pins and
the shaft, parallel to the axis of the shaft. Cam B carries a roller
K and cam C, a roller L. Adjacent to these movable cams, there
is a disk D having two sets of ratchet teeth and two side cams
M and N. (The end view of this disk is shown at the lower part
194 MECHANICAL MOVEMENTS
of the illustration.) A pawl F rests upon the block G until the
increase or decrease of pressure interferes with the balance of
the spring shown and causes pawl F to drop into engagement
with a ratchet tooth. As soon as this engagement occurs, disk
D stops rotating and cams M and N come into engagement
with rollers K and L and force cams B and C over toward cam i4,
so that they engage the wide cam-roller on the follower, and
give it the required variation of movement. The cam H re-
turns pawl F to the neutral position.
Sectional Interchangeable Cams for Varying Motion. — A
flexible cam system was required that made it possible to vary
the motion relative to the complete cycle of movements by sub-
stituting one interchangeable cam section for another, instead
of using a large single cam for each variation. Two distinct
methods of obtaining practically indentical results were suc-
cessfully evolved. One mechanism was a rotary type and the
other involved the use of rectilinear motion for the cam sections.
Both mechanisms might properly be called '' magazine " cams,
because the cam sections are continually placed in action and
then replaced by others in successive order.
The rotary design is illustrated in Fig. 5. The cam sections
shown at A are semi-circular. The continuity of the cam sur-
face is obtained by making each semi-circular section in the form
of a half turn of a spiral with dose-fitting joints, the complete
cam appearing like a worm. The sections are fed longitudinally
along the shaft and successively under the lever roller at a rate
of advance equaling the lead of the spiral. Four feathers C
are provided to guide and retain the cams. The two screws D
producing the longitudinal movement are driven by pinions E
meshing with an internal gesw F, which is fastened to the bearing.
As the feathers extend only to within the width of one cam from
the left bearing, two sections drop from the shaft at every revo-
lution, the dropping sections being guided by the guides G.
The double cam upon the driving gear 7, the lever /, and the
carrier-slide K provide the means for hanging the semi-drcular
cams upon the magazine bar ff. The slide K catches each
piece by the pins L and, by pushing one, causes the further one
IRREGULAR MOTIONS 195
to slide onto the lifting slide M which engages its grooved hub.
The gears N and 0, in. the ratio of i to 2, and disk P operate a
slide for returning the cams to their shaft. The rollers on P
successively engage the steps Mi and M%, thus raising the slide
which drops back automatically.
To fadhtate engagement between the cam threads and the
screws, the square threads of the latter are V-shaped at the
entering ends, and, to insure locking the cams to the shaft
quickly, the ends of the feathers recede into pockets and fly
out by the action of springs. Any part of the system may be
changed by placing the desired section in a holder and intro-
ducing it between the slide K and the magazine bar. The cam
to be removed — the dropping cam — comes out upon an inclined
runway of the hcJder.
The alternate design is the rectilinear cam system shown in
Fig. 6. The mechanism consists of the cam sections A, pro-
vided with rack teeth at B. (See also detail sectional view.)
Each section has four lugs C which act as guides in the ways D.
A pinion E feeds the sections along beneath the lever roller,
and the frictionally driven pinion P assembles them. When
any section has passed beneath the roller, it is automatically
196 MECHAiaCAL MOVEMENTS
hung upon the magazine chute. The forward lugs C are made
sUghtly longer than the rear ones, to span the gap G; but the
rear lugs enter the gap just as the forward lugs clear the ways.
The sections are taken from the lower part of the ways in the
magadne by spring-controlled forks H upon the chain / which
engage the lugs and lift the cams until the smaller lugs strike at
the comer J. The linked gear K meanwhile ei^ges the rack,
and as it swings about the center L, it lifts the cam up ag^nst the
ways; here the resistance offered to further motion of the links
causes K to rotate about its own center and shde the cam into
Fii. 6. IntercbantMbte Cam Sectioiu vblch Iuit* k SactOiiiMi Motion
place. Substitute sections are introduced at M, and the replaced
sections are lifted from the ways.
Variable Rotary Motion derived from Cam. — An imusual
application of a cam is illustrated m Fig. 7. In this case, a cam
is used to impart a variable speed to a diaft which makes the
same number of revolutions as its driving shaft. Tlie driving
shaft carries a casting A to which is fulcrumed the lever B which,
in turn, has a roll on each end. One roll engages a cam C which
is supported upon the shaft but does not revolve with it. The
other roll bears upon a lug on the side of gear D which is also
free upon the shaft, but is constrained to revolve with it either
faster or slower, according to the relative positions of lever B
and cam C.
IRREGULAR MOTIONS 197
Group of Cftms engaged Successively. — The mechanism to be
describe^ was designed to engage with the driving shaft first
one and then another of the cams in a group of five mounted
upon the same shaft. It was necessary to have these cams oper-
ate their respective levers successively back and forth from one
end of the group to the other, and while any one cam was in
action the others must remain stationary with their lever rolls
on a 90-degree dwell. Eight revolutions of the shaft were re-
quired to complete one cycle of movements. The device for
VU- 7> Ap^icatloa of Cam for Vanrliia Sotaij HoUihi
controlling the action of these cams is shown in Fig. 8. The
cams A, B,C, etc., are mounted upon a hollow shaft D carried
in bearings E. The engagement of successive cams with the
hollow shaft is effected by a roll-key G which is caused to move
inside of the shaft from end to end. This motion of the roll-key
is obtained from ratchets K and Ki. (See longitudinal section
at lower part of illustration, which is taken at an angle of 90
d^rees to i^per section in order to show more clearly the con-
struction.) As the roll-key is moved along, it follows the in-
clined surfaces B which bring it into engagement with the re-
spective cam keyways, as at Af. Vfitinn the roll-key there is a
double-ended pawl L (see also detail view) which is held into
198 MECHANICAL MOVEMENTS
engagement with either ratchet K or Ki by balls and springs.
The ratchets are cut oppo^tely and are g^ven a reciprocating
movement by cam O, roll N, and roll screw P which causes both
ratchets to reciprocate tt^ther. A dmilar equipment on the
opposite end of the ratchet makes the motion positive. When
the roll-key has engaged the last cam in one direction, the return
of the ratchet causes the pawl L to rise onto a higher surface.
Fig. 8. Cmiu in a Onmp encafed SaecMsiTalr
thereby throwing it into mesh with the other ratchet and effect-
ing the reversal.
Obtaining Resultant Motion of Several Cams. — A driven
member or follower is given a motion corresponding to the re-
sultant motion of four other cam-operated followers by the
mechanism to be described. These followers are in the form of
levers, which are equally spaced and fulcnimed upon one bar.
Four of the levers are operated independently by four positive-
IRREGULAR MOTIONS
199
motion cams. The fifth lever, which is in the center of the group,
receives the resultant motion of all the others; that is, the forces
acting upon the other four levers are automatically resolved and
their resultant in magnitude and direction is transmitted posi-
tively to the fifth lever. It is not necessary to show the cams
or levers to illustrate the principle involved, but the ingenious
apparatus by means of which the resultant motion is obtained
is shown in horizontal section in Fig. 9. Each of the four levers
is connected by a knuckle joint to one of the racks A, BjCy and
D. These racks are free to sUde up and down independentiy
and are arranged in two pairs. One pair meshes with pinion E
and the other pair with pinion F. As the arrangement of the
mechanism is symmetrical it will only be necessary to describe
the action of one side. Any movements of the levers connecting
Fig. 9. Mectianiim for Obtaining Resultant Motion of SoTeral Cams
with racks A and B will be transmitted to pinions E and G, which
are mounted on one stud and rotate together. A stationary
rack H and a sliding rack / engage pinion G. The sliding rack
/ carries a pinion K which, in turn, engages a stationary rack
L and a sliding rack M. Pinion N is located on sliding bar P
to which is attached the fifth lever previously referred to.
In order to illustrate the action of this mechanism, assume that
rack A lifts one inch, rack B drops one-half inch, rack C is
stationary, and rack D lifts one-quarter inch. The resultant is
a three-quarter inch rise. In analyzing the motion, it shoidd
be remembered that a pinion moving along a stationary rack
will cause a movable rack on the opposite side to travel with
twice the pitch-line velocity of the pinion, which fact and its
converse are here applied. The racks A and B acting upon
pinion E will cause it to rise i X (i — i) = J inch. This move-
X5A
300 MECHANICAL MOVEMENTS
ment is doubled in the sliding rack J which, therefore, travels
one-half inch, and it is again doubled in sliding rack. M which
has a movement of one incli. Rack if, in turn, moves pin ^
and the fifth level slide P one-half indi. If the action of racks
C and D is analyzed in a similar manner, it will be found that
rack O has a movement of one-half inch, and rack iV, one-quarter
inch, which gives a total rise of the lever attached to slide P of
three-fourths inch. To further illustrate the action, if all of the
cam levers should drop one inch simultaneously, the result would
be a drop of four inches for the middle lever attached to slide P.
Double Two-revdution Cam of Shifting Type. — The cam
mechanism illustrated at ^4 in Fig. lo is so arranged that two
revolutions of a double cam are necessary in order to pve the
required motion to a follower. One revolution is required for
the rise or upward movement of the follower and a second revo-
lution for the " dwell," during which the follower remains station-
ary. The cam sections a and h are fastened together and are
free to slide upon their shafts a distance equal to the face width
of one section. The two cam sections are driven by means of a
sjdine. Roll c is attached to the follower or driven member and,
in the illustration, is shown in contact with the spiral cam a,
from which the upward movement is derived. TTie cam A is
IRREGULAR MOTIONS 201
simply a circular disk mounted concentric with the shaft. The
lever d for shifting the double cam is operated by a " load-
and-fire " mechanism having a spring plunger at e. (The load-
and-fire principle is explained in Chapter IV on " Reversing
Mechanisms.")
When the mechanism is in operation, cam a lifts roll c to its
highest position, when lever d shifts the double cam along the
shaft, leaving roll c upon cam 6, where it remains during a dwell
of one revolution; the cam is then immediately shifted in the
opposite direction, thus allowing roller c and the driven member
to drop instantaneously upon cam section a. The movement of
shifting lever d is derived from the double-ended lever / (see
detailed view) which extends through a slot in the cams. This
lever is pivoted at the center and is free to swing in one direction
or the other, until it rests against the sides of the opening. With
the double cam in the position shown in the illustration, end /
engages roll h and forces it to the left until spring plunger e
comes into action and suddenly throws the lever over the full
distance. The opposite end of lever / swings far enough to
clear roll k before this roll is thrown over.
Lever Vibrated from Shaft on which it is Fulcrumed. — A
cam which is used for vibrating a lever twice for each revolution
of a shaft on which it is fulcnmied is illustrated at J3 in Fig. lo.
A gear I attached to the shaft drives a pinion tn which is one-half
the size of the gear. This pinion revolves cam n, and the shaft for
the pinion and cam has a bearing in the end of lever p. The cam
revolves in contact with a stationary roll o which causes the lever
to vibrate about the shaft as a center twice for every revolution.
Shaft Oscillated by Cam located on it. — Fig. lo shows, at C,
how a shaft can be given an oscillating or rocking movement by
a cam which is mounted on the shaft. The cam r is attached to
gear q which is driven from an outside source. As the cam re-
volves in contact with roll s, a reciprocating motion is imparted
to slide L A chain attached to this slide passes over a sprocket
u which is fast to the shaft. The other end of the diain is
fastened to a tension spring beneath the slide, which serves to
hold the roll 5 into engagement with the cam.
CHAPTER Vm
DIFFBRENTIAL MOTIONS
When a motion is the resultant of or difference between two
original motions, it is often referred to as a differential motion.
The differential screw is a simple example of a motion of this
kind. This is a compoimd screw from which a movement is
derived that is equal to the difference between the movements
obtained from each screw. The diagram A^ Fig. i, illustrates
the principle. A shaft has two screw threads on it at e and /,
respectively, which wind in the same direction but differ in
pitch. Screw/ passes through a fixed nut and screw e through
a nut that is free to move. The motion of the movable nut for
each revolution of the screw equals the difference between the
pitches of the threads at e and /.
This combination makes it possible to obtain a very slight
motion without using a screw having an exceptionally fine pitch
and a weak thread. Another form of differential screw is shown
at B, which illustrates a stop that enables fine adjustments to be
obtained readily. The screw bushing g is threaded externally
through some stationary part and is also threaded internally to
receive screw k which is free to move axially but cannot turn.
Both screws in this case are right-hand, but they vary as to
pitch. If bushing g has a pitch of ^ inch or 0.03125 inch and
screw h a pitch of ^ inch or 0.02777 inch, one complete turn of
g will advance screws h only 0.00348 inch (0.03125 — 0.02777
» 0.00348), because, as bushing g advances nj^ inch, it moves
screw h back a distance equal to the difference between the
pitches of the two threads. By turning the bushing only a
fractional part of a turn very small adjustments may be
obtained.
Differential Motion of Chinese 'Vnndlass. — The Chinese
windlass shown by the diagram C, Fig. i, is another simple
202
DIFFERENTIAL MOTIONS
203
example of a dlSerential motion. The hoisting rope is arranged
to imwind from one part of a drum or pidley onto another part
differing somewhat in diameter. The distance that the load or
hook moves for one revolution of the compound hoisting drum
is equal to half the difference between the circumferences of the
two drum sections.
The well-known differential chain htnst illustrated at D oper-
ates on the same general principle as the. Chinese windlass. The
double sheave a has two chain grooves differii^ slightly in di-
ameter, and an endless chain passes over these grooves and
around a single pulley b. This pulley b and the hook attached
to it is raised or lowered, because, for a given movement, a
greater length of chain passes over the larger part of sheave a
than over the smaller part. If the upper sheave is revolved by
pulling down on the side d of the chain that leads to the groove
of smaller diameter, the loop of chain passing aroimd pulley b
will be lengthened, thus lowering the pulley; the opposite re-
sult will be obtained by pulling down on chain c which leads up
to the larger diameter of the sheave.
204
MECHANICAL MOVEMENTS
Differential Motions from Gearing. — Most differential mo-
tions are derived from combinations of bevel or spur gearing.
The epicyclic bevel gear train illustrated by diagram A, Fig. 2,
is applied to many mechanisms of the differential type, and its
action under different conditions should be thoroughly under-
stood. The shaft a has mounted on it two bevel gears b and c
and an arm d. The arm is attached to the shaft and carries a
pinion e which meshes with each gear and is free to revolve upon
the arm. There are several conditions that can exist with a gear
train of this kind.
rm .
[
mm
4J
^
A
Fi(. 3. E^cydlE Tndiu at Btiti and Sptu Oauinc
First, assume that gear b is stationary and c loose on the shaft.
If the shaft and arm d is revolved, motion will be transmitted
from the stationary gear b to gear c, through pinion c, and gear
c will make two turns for every one of arm d and in the same
direction as the arm. If gear b should rotate instead of being
stationary, this motion, combined with that of the arm, would
modify the motion of gear c and it would also make a difference
whether gear b turned in the same direction as the arm or in an
oppoate direction.
Second, suppose the preceding conditions are reversed and
one of the bevel gears 6 or c is revolved while the other gear
remains stationary, and that arm d carrying the bevel pinion
constitutes the driven element 'With only one gear revolving.
DIFFERENTIAL MOTIONS 205
the ami will turn in a direction corresponding to that of the gear
and at half its speed. If both gears rotate in the same direction
at difiFerent speeds, the arm will follow in that direction and with
a speed intermediate between the two. If the gears are driven
in opposite directions at different speeds, the arm will follow
the more rapidly moving gear, and if the speeds are equal, pinion
e will revolve upon the arm, but the latter will remain stationary.
Third, assume that arm d remains stationary and gears b and c
are loose on the shaft. If gear b is the driver, the pinion e will
simply transmit motion to gear c in the opposite direction,
the three gears in this case forming a simple train with pinion e
acting as the idler. The force tending to rotate arm d will be
one-half the force transmitted from gear b to gear c. A prac-
tical application of this last principle is found in the Webber
differential d3niamometer. The arm of this dynamometer which
supports the scale pan and weights corresponds to arm d and is
pivoted on a shaft carrying two bevel gears. On the arm and
meshing with these two bevel gears are bevel pinions and the
amoimt of power transmitted through this train of gearing is
measured by the weights in the scale pan. The combination of
gearing illustrated by diagram A usually has two or more pin-
ions meshing with the bevel gears. In many cases, there are
two pinions located diametrically opposite, as indicated by the
full and dotted lines. The addition of other pinions, however,
does not affect the action of the gearing.
The diagram JB, Fig. 2, shows an arrangement of spur gearing
which gives a differential motion. This combination consists
of ordinary spur gear g, an internal gear A, and a pinion k. This
pinion is free to turn on a stud that is attached to arm h In
the application of this gearing, there are three possible conditions.
In the first place, the internal gear h may be stationary, and the
gears g and k may revolve. Second, the arm I may be station-
ary, in which case either the internal gear h or gear g may be
the driver. Third, gear g may be stationary and the motion be
transmitted in either direction between gear h and arm L Fig.
3 shows a practical application of this gear combination. In
this design, there are two intermediate pinions (corresponding to
3o6 MECHAXTCAL MOVEMENTS
k in diagram B, Fig. 2) which are mounted on an arm and lo-
cated diametrically oppoate. This arm is keyed to the end of a
shaft. The large internal gear is stationary and forms part of a
casing endoang the gears. The central gear is keyed to an-
other shaft which is in line with the ^aft carrying the pinion
arm. This arrangement is simply used to obtain a reduction of
speed. The design is compact, although differential or epicyclic
gearing, in general, is inefficient as a transmitter of power. Such
gear combinations, however, have certain mechanical advan-
tages, and they are often utilized by designers for a variety of
purposes as indicated by the different mechanisms to be de-
scribed.
Compound Differential Gears for Varying Speeds. — Tlie
differential speed-chan^g mechanism shown in Fig. 4 has spur
gears and pinions but no internal gear. This is a compound or
reverted trmn and is intended for an automatic screw machine
of the heavier class (the Cleveland) in order to provide a slow
and powerful movement to the spindle for heavy thread-cutting
operations, or for any other heavy worit which requires a powerful
drive. The gearing is contained within the spindle driving
pulleys on the back shaft of the spnndle head. There are three
pulleys and the slow speed is obtained by shifting the belt to the
DIFFERENTIAL MOTIONS 207
center pulley A, and engaging the sliding clutch B with gear C;
as this clutch slides upon a square shaft and cannot revolve, the
gear C is held stationary. There are two sets of planetary
pinions D and E located diametrically opposite. The pinions
on each stud are locked together but they are free to revolve
about the stud. Pinions D rotate around the fixed gear C,
while pinions E revolve the driven gear F at a slow speed, but
with considerable power. The gear F is keyed to the extension
of pinion G which meshes directly with the front spindle gear of
the machine. When this slow speed is not required, the clutch
B is disengaged, so that the entire train of differential gears is
free upon the loose center pulley A. Two spring plungers (not
shown) attached to pulley A engage the rim of pulley L and
cause both pulleys to revolve together when the slow-speed at-
tachment is not engaged, so that the planetary pinions will not
revolve upon their studs at this time. The clutch B is shifted
by a cam-operated rod E acting in conjunction with a spring /.
With this arrangement of gearing, the differential action and
reduction of speed is the result of the difference in the diameters
of pinions D and E and thdr mating gears. When the slow-speed
attachment is operating, the larger pinions D roll around the
2o8 MECHANICAL MOVEMENTS
stationaxy geax C and force gear F to follow slowly in the same
direction. This action will be more apparent if that part of the
larger pinion D which is in engagement with stationary gear Cy
at any time, is considered as a lever pivoted at the point where
the teeth mesh with the stationary gear. As the pinion D re-
volves and the imaginary lever swings aromid its fulcrum, the
teeth of the smaller pinion E in contact with gear F force the
latter to move in the same direction in which the rolling pinions
D and E and pulley A are moving. (See " Reversal of Motion
through Epicyclic Gearing," Chapter IV.)
Differential Motion between Screw and Nut — Variations of
movement are sometimes obtained by the differential motion
between a revolving screw and a nut which is rotating about
the screw at a different speed. One application of this principle
is illustrated by the variable-speed mechanism of a milling ma-
chine shown in Fig. 5. This mechanism is designed to increase
the efficiency of a machine by accelerating the speed of the table
when the cutters are not at work. The machine table moves
rapidly up to the cutting point, then the speed is reduced while
milling and, after the operation is completed, the table is quickly
returned to the loading position.
This mechanism is located beneath the machine table C, which
is traversed by a screw Z7, that passes through the plain bearings
E, F, and G, mounted upon the base of the machine. The
pinion E is confined longitudinally between bearings E and F,
and it is splined to screw Z7, so that the latter must turn with the
pinion but is free to slide in a lengthwise direction. The hole
through gear / is threaded to fit screw D so that it is practically
a nut and gear combined. The auxiliary shaft / supported in
bearings K carries two pinions, L and ilf , which are loosely
mounted upon the shaft. This shaft / is rotated continuously
in one direction through spiral gears W from the driving shaft
V. Within the housings N and O are dutch sleeves which
encircle the shaft /. The sleeves are splined to the shaft, but are
free to slide upon it, and they may be locked with teeth formed
on pinions L and Af . These clutches are controlled by levers T
and U at the front of the machine which are connected by the
DIFFERENTIAL MOTIONS
209
shafts shown, with the clutch shif tmg devices at R and Q. The
action of the clutches is controlled automatically by adjustable
stops located on the front of the machine table.
The dutch connecting with gear L is first engaged by hand
lever T, The table then moves forward rapidly (in the direction
indicated by arrow i4) as gear H revolves ^rew D and causes it
to turn through the gear nut / which is held stationary at this
time. Just before the milling cutter begins to act upon the
work, lever U strikes a stop, thus engaging the clutch with gear
M. The gear nut / is then revolved in the same direction as
Fig. 5. Variable Feeding Mechanism which it partly controlled by the
Differential Movement between a Revolving Screw and Ifnt
gear H but at a slower speed, so that the forward movement of
screw D is reduced, because of the differential action between the
screw and nut. Both sets of gears continue to operate while
the cut is being taken; when the milling operation is completed,
another stop engages lever T, thus stopping the rotation of gears
L and H. As the gear nut / continues to revolve about the
screw, the movement of the machine table is reversed, since
screw D is not rotating. The motion continues in the direction
indicated by arrow B imtil a third stop to the right of lever U
trips the latter, thereby stopping gear / and the table movement.
2IO MECHANICAL MOVEMENTS
The table is dow in position for removing; the finished parts and
replacing them with others that require milling.
Differential Feeding Mechanism for Revolving Spindle. —
The spindle of a horizontal boring, drilling, tapping, and milling
machine is given a lengthwise feeding movement by the differ-
enrial action between the revolving spindle and a revolving
nut which engages a helical groove in the spindle. The spindle
is driven by a large gear A (see Fig. 6) which connects with the
back gearing of the machine. The hub of this gear has two keys
which engage the splined spindle. The sleeve B on which gear
A is mounted has gear teeth cut in one end which mesh with
three planetary pinions D that engage one side of the double
internal gear E. The other side of this internal gear meshes
with pinions N. These pinions, in turn, mesh with gear teeth
formed on the rotary nut L which engages directly with a spiral
or helical groove cut in the spindle. A flange on this nut rotates
between large ball thrust bearings, as shown, in order to take
the end thrust in either direction.
When nut L rotates at the same speed as the spindle, the latter
DIFFERENTIAL MOTIONS 211
does not move in a lengthwise direction, but, by revolving nut L
either faster or slower than the spindle, a feeding movement in
one direction or the other is obtained. The rotation of nut L
is regulated by the gearing at G, When the feeding movement is
stopped, gear F, which carries the planetary pinions ZJ, does not
revolve and nut L rotates with the spindle, which, therefore,
remains in the same longitudinal position. When gear F which
is connected indirectly with the feed change-gears G is revolved
by these gears, the nut L is revolved independently of the spindle
and at a different rate of speed.
Application of Floating Lever Principle. — What are known as
" floating " or " differential " levers are utilized in some forms of
mechanisms to control, by the application of a small amount
of power or force, a much greater force such as would be re-
quired for moving or shifting heavy parts. Floating levers are
commonly applied to mechanisms controlling the action of parts
that require adjustment or changes of position at intervals vary-
ing according to the function of the apparatus subject to control.
The initial movement or force may be derived from a hand-
operated lever or wheel, and the purpose of the floating lever is
to so control the source of power that whatever part is to be
shifted or adjusted will follow the hand-controlled movements
practically the same as though there were a direct mechanical
connection. A floating lever is so called because it is not attached
to fixed pivots and does not have a stationary fulcrum, but is
free to move bodily, or to " float " within certain limits and in
accordance with the relative forces acting upon the different
connections.
Fig. 7 illustrates one application of the floating lever. The
diagram at the left represents an auxiliary braking apparatus
for a large hoist. The brake shoe A is applied to the brake drum
B whenever the dead weight C rests upon the lever D. This
lever is connected by rod E with a cross-head attached to the
upper end of a piston rod extending through the oil cylinder F
and into the steam cylinder G, When steam is admitted beneath
the piston in cylinder G by opening a valve at H, the weight is
raised and the brake released, and, if for any reason the steam
212
MECHANICAL MOVEMENTS
pressure should be suddenly reduced, weight C would fall and
the brake be applied automatically. The movements of the
piston in cylinder G and, consequently, of weight C are controlled
by hand lever L through floating lever /, in such a manner that
the weight rises and falls, as the lever is shifted, practically the
same as though the force, for moving the weight were derived
directly from the lever by means of a rigid mechanical connection.
Fig. 7. DUcnum fflustratiiig Application and Action of Floating X«Ter
The action of the mechanism is as follows: If the weight is down
and the brake applied, and lever L is moved from its central
position to the right, the left-hand end of lever / will be raised
(as shown on an exaggerated scale by diagram X), thus lifting
rod K and opening valve H\ this valve has no lap, so that any
movement of the lever admits steam to the cylinder. As soon
as the piston begins to rise, the right-hand end of lever / also
rises (see diagram Y) and turning about pivot O inmiediatdy
begins to dose the steam valve. If the lever L is moved through
DIFFERENTIAL MOTIONS 213
a small axe, the valve is closed quickly and the weight only rises
a short distance; on the contrary, if the lever is thrown over to
the extreme position, the piston and weight must move upward
a proportionately greater distance before the valve .is closed.
If the lever, after being thrown to the right, is moved towards
the left, valve H opens the exhaust port and the weight descends;
as soon as it begins to move downward, the left-hand end of the
floating lever is raised, which tends to close the exhaust port
and prevent further downward motion.
An apparatus of this kind responds so quickly to adjustment
that the weight follows the motion of the hand lever almost
instantaneously and the end of the floating lever connected to
rod K has very little actual movement. The oil cylinder P is
used to stabilize the action of the weight and prevent overtravel
which woidd occiu* if there were only the cushioning effect of
steam. The by-pass valve N controls the flow of oil from one
end of the cylinder to the other as the piston moves up or down,
so that the motion of the weight ceases as soon as the steam and
oil valves are closed.
Controlling Mechanism of Steering Gear. — The practical
effect of the floating lever previously described for controlling
the movements of power-driven apparatus may be obtained by
other mechanical devices, examples of which are found on steam-
ships for controlling the action of the steering engines. Engines
used for this purpose are commonly equipped with a control valve
which distributes steam to the engine valves. The latter are
generally of the hollow piston type and are arranged to receive
steam either at the ends or in the center, the exhaust varying
accordingly. The admission of steam either to the ends or in
the center is governed by the position of the control valve. For
instance, if the control valve is moved in one direction, steam
may be admitted to the ends of the engine valves and be ex-
hausted in the center. If the control valve were moved in the
opposite direction, this order would be reversed and also the
direction in which the engine rotates; therefore, each engine
valve requires but one eccentric, the control valve acting as a
reversing gear. The mechanism which operates this control
214 UECHANICAL MOVEMENTS
valve b so designed that, when the engine is set in motion to
move the rudder either to port or starboard, this same motion is
utilized to shift the control valve in such a way that the move-
ment of the rudder coincides with the motion of the steering
wheel. While the floating lever has been used in connection
with this controlling mechanism, the common form of control
depends upon the action (which is often differential) either of
gearing or of a screw and nut.
With the arrangement illustrated at A , Fig. 8, the control valve
of a steering engine is governed by the action of a screw that is
operated by the steering wheel, and a nut that is revolved by
A
the en^ne. The shaft a is connected with the steering wheel
and transmits rotary motion to screw b which is splined to, and
free to slide throu^, gear c. The rod d serves to operate the
control valve of the steering engine. Any rotary motion of
shaft a moves screw i in a lengthwise direction in or out of the
nut on worm-wheel e, uidess this nut is revolving at the same
speed as the screw. The action of the mechanism is as follows :
If worm-wheel e, which meshes with a worm on the steering en-
gine crankshaft, is stationary, the rotation of diaft a will turn
screw 6 in or out of the nut and shift the control valve, thxis
starting the engine in one direction or the other, depending upon
which way the control valve was moved. As soon as the enpne
starts, worm-wheel e and the nut begin to revolve, which tends
DIFFERENTIAL MOTIONS
"5
to move the screw and control lever in the oppodte direction.
Suppose screw b were revolved in the direction shown by the
arrow /, thus moving the screw and control lever to the right;
then, as the en^e starts, worm-wheel e and the nut revolve as
shown by the arrow g. Now as soon as the rotation of shaft a
and screw b is stopped or is reduced until the speed of rotation is
less than that of worm-wheel e, the screw is drawn back mto the
nut and the control valve is closed. If the steering wheel and
screw b were turned slightly and then stopped entirely, the rud-
der would only be moved a corresponding amount, because the
control valve would soon be shifted, by the action of worm-
wheel e, to the dosed position. Steering eng^es, in general,
are equipped with some form of stopping device which auto-
matically limits the movement of the rudder and prevents
overtravel and damaging the mechanism.
Contnd Mechanism having Differential Bevel Gearing. —
The steering gear controlling mechanism illustrated in Fig. 9
operates on the same general principle as the design previously
described, although the constructioa is quite different. The con-
trol valve, in this case, operates with a rotary motion, instead of
moving in a lengthwise direction. Shaft A is revolved by the
steering wheel and transmits rotary motion to shaft B through
2l6 MECHANICAL MOVEMENTS
the gearing shown. The differential action for regulating the
position of the control valve is obtained by means of three gears
C, D, and £. Gear C is keyed to shaft B, and gear E on the
extended hub of worm-wheel F is free to revolve about shaft B.
Gear D interposed between gears C and E is mounted upon a
segment gear G which engages another segment gear on the con-
trol valve spindle /. If shaft B is revolved while gear E and
the worm-wheel are stationary, gear D rolls around between the
gears and, through the segment gear, turns the control valve,
thus starting the steering engine and with it the worm H on the
crankshaft which drives worm-wheel F and gear E. As soon as
the rotation of shaft B is stopped, gear E which has been re-
volving in the opposite direction to that of C rolls gear D back
to the top position, thus closing the control valve and stopping
the engine. If gears C and E are revolved at the same speed,
gear D simply rotates between them and the control valve re-
mains open. If the speed of gear E exceeds that of C, the valve
begins to close, and if C revolves faster than £, the valve is
opened wider and the engine continues to operate.
Rolling Worm-wheel Type of Controlling Mechanism. —
The ingenious substitute for the floating lever illustrated at £ in
Fig. 8 depends for its action upon a worm-wheel which is inter-
posed between two worms. The handwheel h controls the ro-
tation of worm j, which meshes with the worm-wheel k. The
worm / on the opposite side of the worm-wheel is rotated by
whatever apparatus is to be controlled. The shaft of the worm-
wheel is journaled in boxes which are free to slide up and down
the vertical slides in the framework shown. Any vertical dis-
placement of the worm-wheel is transmitted to rod n which
operates the valve, clutch, or other mechanical device used for
starting, stopping, and reversing the driving machinery. Assume
that the mechanism is at rest with the worm-wheel midway be-
tween its upper and lower positions in the vertical slides of the
housing. When the handwheel h is revolved in a direction cor-
responding to the motion desired, worm j revolves, and worm /
is stationary, since the mechanism is not yet in motion; there-
fore, the rotation of the handwheel has the effect of rolling the
DIFFERENTIAL MOTIONS 217
worm-wheel k between the two worms either up or down, de-
pending upon the direction in which the handwheel is rotated.
Any vertical displacement of the worm-wheel will, through the
medium of controlling rod n, start the power-driven machinery.
This motion is immediately transmitted to shaft m and worm /
which acts to move worm-wheel k in the opposite direction ver-
tically, provided wormy is stationary or is revolving slower than
/. The result is that the power-driven member is moved or ad-
justed proportionately to the rotation of the handwheel A. The
handwheel, for instance, might be turned to a position coire-
sponding to a certain required adjustment, which would then be
made automatically. This controlling device operates on the
same general principle as the steering gear controlling mecha-
nisms previously described.
Differential Governors for Water Turbines. — Many of the
automatic governing devices used for controlling the speed of
water turbines have a differential action. A simple form of
governor is illustrated in principle by the diagram A, Fig. 10.
An auxiliary water motor drives the bevel gear a by belt d, and
bevel gear c is driven by belt e from a shaft operated by the tur-
bine to be governed. Both gears a and c are loose on their
shaft, but the arm n which carries the bevel pinions b is fast to
the shaft. On one end of the shaft there is a pinion / which
meshes with a rack g that operates the turbine gate, and thus
controls the flow of water to the turbine. As the auxiliary motor
has no work to do except to drive part of the governing mech-
anism, it runs at practically a constant speed; the variations
due to the rise or fall of the water level are so small a percentage
of the total head of water that the speed of this motor is little
affected. It will be assimied then that the speed of gear a is
practically uniform. The speed of gear c, however, changes
with an increase or decrease of the load upon the turbine, and,
as gear c runs faster or slower than gear a, the arm n follows it
aroimd one way or the other and thus opens or closes the turbine
gate.
The governor shown at B also has a differential action, but
it is controlled by centrifugal force acting on a fly-ball governing
3l8 MECHANICAL MOVEMENTS
device. The governor is operated by a belt a connected with
the turbine. This belt passes around idler pulleys and over the
wide-faced pulleys b and c. These pidleys, throu^ bevel geat-
ing, drive the differential gearing composed of gears d, e, and /.
Gears d and e are loose from their shafts and pinion/ is pivoted
on an arm that is keyed to the shaft. Gear e is connected by the
gearing shown with a centrifugal governing device at g. The
belt pulley b is conical ajid the diameter at the center is the same
as that at pulley c. When the turbine is operating at normal
speed, the belt is at the center of the conical pulley b and, con-
DlBerenUal Oorerninc D«Ticei tor W««r TtublsM
sequently, gears d and e revolve at the same rate of speed in op-
posite directions. The result is that the arm carrying pinion /
remains stationary. If the turbine begins to run too fast, the
balls at g move outward under the action of centrifugal force,
and belt a is shifted by a mechanism not shown to a smaller part
of the conical pulley b. The resulting increase in the speed of
gear d causes the arm carrying pinion / and the shaft k to which
it is attached to revolve in the same direction as gear d. As a
result of this movement, the turbine gate is lowered by means of
gearing not shown, and the speed of the turbine wheel is reduced.
If the turbine should begin to run more slowly than the normal
DIFFERENTIAL MOTIONS 219
speed, the shifting of belt a by governor g would cause gear d
also to revolve slower, thus turning shaft A in the opposite direc-
tion and reusing the gate.
Another modification of the difEerential governor is shown by
the diagram, Fig. 11. This particular type of governor was
installed in one of the large power plants at Niagara Falls. It
is equipped with two sets of epicyclic gearii^. The gears A
and B are free to turn on the shaft, but may be retarded by brake
bands at E and F. The inner gears C and D are driven by belts
connected is some way with the turbine. One of these belts is
open and the other crossed, so that the gears revolve in opposite
H«- 1
directions. The brake bands are so arranged that, whqn one
tightens, the other loosens its grip on the brake drum. Both of
these bands are operated by a shaft G and the ti^tening of the
bands is eflfected by a double ratchet mechanism (not shown)
having two pawls. One pawl rotates shaft G in one direction
and the other in the opposite direction. When the speed in-
creases or decreases, one pawl or the other is operated by a fly-
ball governor driven from the turbine. As the result of this
modoD of the pawl, one band is listened and the other released,
so that one of the gears ^4 or £ is held with a greater or less
degree of friction or is prevented from turning alt<^ther, while
220 MECHANICAL MOVEMENTS
the other one runs free. If gear A is held by the brake, the aim
carrying pinion H will begin to turn in the same direction in
which gear C turns, whereas, if gear B remains stationary, the
arm carrying pinion / will follow gear D; consequently, the
pinion K on the end of the shaft will by means of a rack raise or
lower the turbine gate. This governor depends for its sensitive-
ness upon the fly-ball governing device, and for its power upon
the open and cross-belts which may be proportioned to transmit
any required amoimt of power.
Differential Gearing of Automobiles. — One of the important
applications of differential gearing, at the present time, is found
on automobiles. The object of transmitting motion from the
engine to the rear axle through differential gearing is to give an
equal tractive force to each of the two wheels and, at the same
time, permit either of them to run ahead or lag behind the other
as may be required in rounding curves or riding over obstructions.
The axle is not formed of one solid piece, but motion is trans-
mitted to the right- and left-hand wheels by means of separate
sections, the inner ends of which are attached to different mem-
bers of the differential mechanism. The principle of this me-
chanical movement will be imderstood by referring to Fig. 12.
Two general types of differential gearing are shown in this illus-
tration. The deagn at the left is equipped with bevel gearing
and is the type generally employed. The propeller shaft ex-
tends from the transmission case where speed changes are ob-
tained, and revolves the bevel pinion N which drives the large
bevel gear M. This gear M and the casing O to which it is
bolted revolve freely on the hub of gears F and £. Attached
to the casing O are radial pivots on which revolve loosely
bevel pinions D. These pinions engage the bevel gears E and
F which are connected with the right- and left-hand axles or
shafts r.
Under ordinary conditions, the rotation of gear M causes
gears F and E to both revolve at the same rate of speed, since
the connecting pinions D are moved around with the casing O,
but do not revolve. To illustrate the action, assume that the
wheels are jacked up and are sunply revolving in one position;
DIFFERENTIAL MOTIONS 321
then, if one wheel is held from tvtming so that, say, gear E is
stationary, the rotation of bevel gear M will roll pinions D around
on gear £, with the result that gear F will revolve twice as fast
as when gear E is revolvii^ with it and at the same speed. On
the other hand, if the oppoate wheel and gear F were held
stationary, the gear E would run at twice its normal speed;
moreover, if the speed of either of the gears is reduced, the other
side is q>eeded up a correspondii^ amount.
Kg. ta. AutomoUl* DUtamitUl OeKriac of BeT«I and Spur Oeai Tjp«a
While the bevel form of differential gearing is largely used,
some designs have been equipped with spur gearing. The dia-
gram at the right in Fig. 12 illustrates the difference in arrange-
ment Each of the bevel pinions is replaced by a pair of ^ur
pinions D connecting with each other and with spur gears E and
F. These pinions do not extend over as far as the opposite gear
so that connection between the gears F and E is from one pinion
to the other, as shown by the detailed view. The action of this
form of differential is identical with the bevel pinion type pre-
viously described. The differenrial gearing is ordinarily in-
corporated in the rear axle, except when power is transmitted to
223
MECHANICAL MOVEMENTS
the wheel by means of side chains, in which case the differential
is in the countershaft.
Speed Regulation through Differential Gearing. — When the
speed of a driven part is governed by drives from two different
sources, differential gearing may be used to combine these drives
and allow any variations in speed that may be reqtdred. An
application of this kind is f oimd on the fly frames used in cotton
spinning for drawing out or attenuating the imtwisted fiber or
Fig. 13. Diagram of Mechaniam having Diffarential Gearing Hiroagh
which Spoad Changea are Tranamitted
roving, by passing it between different pairs of rolls which move,
successively, at increased speeds. After the fiber is attenuated,
it is woimd on bobbins and at the same time given a .slight twist.
The diagram, Fig. 13, represents a mechanism for controlling the
speed of the bobbins, one of which is indicated at B. This
bobbin receives its motion through a train of gearing connecting
with the main shaft of the machine and also through another
combination of gearing which is driven by a pair of cone-pulleys
DIFFERENTIAL MOTIONS 223
for decreasing the speed of the bobbin as the roving is wound upon
it and the diameter increases.
The main shaft is driven by pulley A and motion is transmitted
through shaft S and the gearing shown to the cone C and the
rolls, one of which is indicated at the upper part of the diagram.
The cone C and the rolls move at a constant speed, and the roving
is delivered by the rolls at a uniform rate of speed. On the
shaft S there is a bevel gear £, which is one of the gears of an
epicyclic train that is commonly known as the '' differential
motion." The large gear D corresponds to the arm of the gear
train, since it carries the two intermediate bevel pinions / and K.
This gear D is driven from the lower cone C\ which is connected
by belt with the upper cone. Bevel gear F which meshes with
the pinions carried by gear D is loose on shaft S and is connected
through gearing with the bobbin B. With this arrangement,
the speed of the bobbin depends first upon the speed of bevel
gear £, which is constant, and also upon the speed of gear D,
which may be varied by shifting the position of the belt on the
cones. Any variations in the relative speeds of gears D and E
will produce twice the variations in the speed of the bobbin.
The roving is woimd on the bobbin in successive helical layers
by means of the flyer E driven at a constant speed by gear M
on shaft S. The roving passes from the rolls to the flyer, and
entering the top of its hollow spindle, is threaded down through
one arm of the flyer and then wound on the bobbin. The flyer
and bobbin revolve in the same direction, but the bobbin has a
higher velocity and, for that reason, draws the roving from the
flyer and winds it in successive layers as the bobbin travels up
and down, so as to cover its entire surface. As each successive
layer is added, the bobbin increases in diameter, and its speed
relative to that of the flyer must be decreased in order to pre-
vent breaking the roving. This change of speed is transmitted
to the bobbin through the differential gearing referred to by
shifting the belt on the cone-pulleys.
Differential Gear and Cam Combination. — The differential
gear and cam combination described in the following is used on
fly-frames in conjimction with the same general class of mecha-
224
MECHANICAL MOVEMENTS
nism illustrated by the diagram, Fig. 13. This mechanism
differs from the differential ordinarily used in that it has no
epicyclic train of gearing. As previously explained, a differential
motion is employed in connection with a shifting belt and cone-
pulleys for changing the speed of the bobbins. The differential
action is obtained, in this case, by means of a crown gear A
(Fig. 14) which is attached to the main driving shaft B\ the
crown gear C secured to sleeve J£, which carries the bobbin
driving gear F, and the double crown gear Z), which is moimted on
a spherical seat and engages gears A and C at points diametri-
cally opposite. This double crown gear operates in an oblique
position, so that a small part of the gear meshes with gear A
Fig. 14* DifferontUl Gear and C«m CombiiiAtl<m
on one side and a small part on the other side meshes with gear
C. The spherical bearing allows the intermediate crown gear
D to swivel in any direction, and it is held in position by a cam
surface on the edge of sleeve G. The gear C has the same num-
ber of teeth as the intermediate gear £), but gear A has a some-
what smaller number of teeth.
The differential action is obtained by the relative motions
between gear A and cam G. This cam is driven from the lower
belt-cone of the machine which is connected with gear H.
If cam G were revolving at the same speed as gear A, the same
teeth on gears A and D would remain in contact and the entire
gear combination would act practically the same as a clutch.
As soon as the speed of the cam differs from that of gear A, the
position of intermediate gear D is changed so that different teeth
DIFFERENTIAL MOTIONS 22$
are successively engaged. As the result of this differential
action, the speed transmitted to gear C is either increased or
decreased. The extent of the differential motion depends upon
the difference between the speeds of gear A and cam G. As
this difference diminishes, the speed of gears D and C increases;
inversely, as the speed of cam G is reduced, the speed of gear C
is also reduced, ^ce the motion from gear A is lost as the result
of differential action. The advantages claimed for this mecha-
nism are quiet operation and reduction of friction.
Differential Mechanism of Gear-cutting Machine. — On a
certain kind of gear-cutting machine, a differential mechanism
is employed so that when cutting spiral gears the rotary motion
Fli- IS- Ap^c4tloD of DiflenntUl OMrins lu ComUnlnc Kotai; Motion*
for generating helical teeth will be combined with the rotary
motion for indexing the work, for cutting successive teeth.
This machine operates on the same general principle as a uni-
versal milling machine when the latter is used for cutting spiral
gears. The mechanism, however, for generating the helical
teeth and indexing the work form integral parts of the machine.
The screw which feeds the cutter-slide along the horizontal bed
of the machine is driven from cone-puUey D (see Fig. 15) through
connecting shafts and gears. This cone-pulley is also connected
with change gearing F which transmits motion to the indexing
worm K for revolving wheel G and the work at a rate suitable
for generating the required helix angle. These change-gears
226
MECHANICAL MOVEMENTS
F serve the same purpose as those used on a universal milling
machine for connecting the spiral head with the table feed-
screw. The worm-wheel G is not only used for rotating the work
in order to generate the helix, but for indexing as well. The way
these two motions are imparted to wheel G without interfering
with each other will now be explained.
The change-gears for controlling the indexing movement con-
nect at H with a shaft leading to the differential or epicyclic
gearing, consisting of bevel gears / and L with intermediate
pinions N. Bevel gear / is attached to the shaft connecting
with the change-gears at J7, whereas the opposite bevel gear L
qooaoaoooooojooc-e-B-oooo^o^tooco^xa'
■J M o <f »Ma»
Fig. x6. Crane eqtiipped with DifferontUl Hoifting Mecluuiism ihowii
DiAgnumnatically In Fig. 17
is attached to a hollow sleeve upon which worm K is mounted.
The bevel pinions N are carried by an arm attached to shaft M.
This shaft M is driven by worm-wheel connecting with the
cutter-slide through change-gears F. The action of this differ-
ential mechanism or " jack-in-the-box " is such that, if shaft M
is stationary, the change-gears at H may be operated for in-
dexing, motion being transmitted from gear J to L through
pinions N as idlers, thus revolving worm K. On the other
hand, if the indexing mechanism is stationary and the cutter-
slide feeding, the movement thus imparted to shaft M may be
transmitted to worm K as pinions N roll around the stationary
bevel gear / and impart motion to gear L. As will be seen, it
DIFFERENTIAL MOTIONS
227
would be possible with this mechanism to index the work and
rotate it for generating helical teeth independently. The two
motions can also be operated together or combined without inter-
ference. The change-gears at H are connected through a one-
revolution friction trip with the main driving shaft. As the
cutter feeds across the gear blank, a helical groove is generated
by the rotary motion derived from change-gears F, shaft Af ,
the differential gearing, and worm K, After a tooth groove is
finished, the cutter is dropped down to clear the work and re-
tiuned for milling another tooth groove. The indexing mecha-
nism is then tripped by hand and the work is rotated sufficiently
Fig. 17. Differential Hoistiiix Mechanism
for the next successive tooth by the change-gears at H acting
through the differential gearing and worm K,
Differential Hoisting Mechanism. — An ingenious method
of utilizing differential action to vary the speed of a hoisting
mechanism is illustrated by the diagram, Fig. 16, which repre-
sents the crane to which this mechanism is applied. There are
two chains attached to the crane hook. One of these chains
A passes over a pulley on the troUey and over pulley B to the
winding drum C. The other chain D passes upward over its
trolley pulley to the left, and over pulley E to pulley F, and then
down to a drum located back of drum C. These chains may
be wound upon their respective dnuns either in opposite direc-
328
MECHANICAL MOVEMENTS
tions or in the same direction, and at varying rates of speed.
If both drums are rotated in 0|qx}site directions at the same speed,
the effect will be to raise or lower the hoisting hoolL, whereas,
if the drums rotate in the same direction and at equal speed, the
chain will be taken in by pne and given off by the other, thus
causing the hook and its
load to be carried hori-
zoQtally without raising
or lowering it. Any dif-
ference in the speed of
the two drums when mov-
ing either in the same or
opposite directions will
evidently cause the hook
to move both vertically
and horizontally at the
same time.
The mechanism for op-
erating the two hoisting
drums is illustrated dia-
grammatically in Fig. 17.
There are two electric
motors J and K. Motor
/ drives the worm-wheels
L in opposite directions
and also' the attached
bevel gears. The other
motor K drives the spin:
gears M and the upper
bevel gears. The inter-
mediate pinions N be-
tween the bevel gears revolve on arms Q which are keyed to
the shafts of their respective drums. The bevel gears with
which the pinions mesh are loose on their shafts. With this
arrangement, if motor K is stationary, motor / will drive
the drums in oppo^te directions and raise or lower the hook
as previously explained. On the other hand, with motor J
ng. 18. DifleieatUl Spaed Indicator
DIFFERENTIAL MOTIONS 229
Stationary, motor K will operate the drums in the same direction
and move the crane hook horizontally. As these motors may
be reversed or operated together at varjdng speeds, any desired
combination of movements and speeds for the hook and its load
may be obtained.
Differential Speed Indicator. — A sensitive speed-indicating
device which shows variations of speed between two rotating
parts is shown, partiy in section, in Fig. 18. This indicator
operates on the differential principle. It is eqmpped with two
cylindrical rollers; one roUer is shown at A and the other is lo-
cated in a similar position on the opposite side of the vertical
center line. The axes of the roller shafts are in the same vertical
plane, and on the ends of these shafts are mounted belt pulleys C.
These pulleys are connected with the shafts the relative speeds of
which are to be compared. Each roller i4 is in contact with a
spherical steel ball B three inches in diameter. The ball is
held in position by a small stop D at the rear and by a small
roUer E at the front. This roller is mounted on an arm fixed
to a spindle which is free to rotate and to the outer end of which
is attached the pointer F. When both the supporting rollers A
are driven at the same speed and in the same direction, the
spherical ball wiU rotate about a transverse horizontal axis and
will carry the wheel E vertically up or down, as the case may be.
The direction of movement will be indicated by the pointer F.
If either of the supporting rollers runs faster than the other,
the ball will rotate about some inclined axis and wheel E will
naturally tumso that its axis is parallel to that about which the
sphere rotates. This instnmient is said to be very sensitive as
an indicator of speed variations. For instance, it is claimed that
a diflference in the speed of the roUers due to a Variation of 0.00 1
inch in the diameter of driving pidle)rs having a nominal diameter
of 2\ inches cail be detected. While this degree of sensitiveness
may be obtained, it would seem preferable to transmit the motion
from the driving shaft by some positive drive instead of by belts,
inasmuch as any slipping of a belt would affect the action of the
indicator.
CHAPTER DC
CLUTCHES AND TRIPPING MECHAN^MS
The different devices used for controlling motion which is
transmitted by various kinds of mechanism may either be
manually or automatically operated, and be adjustable for vary-
ing the time of disengagement, or non-adjustable so that the
tripping action occurs at the same point in the cycle of opera-
tions. Tripping and disengaging devices also vary in that some
operate periodically or at regular intervals, whereas others act
once and then must be re-set by hand preparatory to another
disengagement. The application of disengaging mechanisms
varies greatly. With some classes of machinery, an auto-
matic trip of some form is used to stop the machine completely
after it has performed a certain operation or cyde of move-
ments. On many machine tools, trips are used to disconnect a
feeding movement at a predetermined point, not only to pre-
vent the tool from feeding too far, but to make it unnecessary for
the operator to watch the machine constantly, in order to avoid
spoiling work. (When a feeding motion must be disconnected
at a certain point within dose limits, it is common practice to
use some form of positive stop for locating a slide or carriage
after the feeding movement has been discontinued by a trip
acting through suitable mechanism.) The function of some
tripping devices is to safeguard the mechanism by stopping either
the entire machine or a part of it, in case there is an unusual
resistance to motion, which might subject the machine to in-
jurious strains.
The three mechanical methods of arresting motion which are
most commonly employed are by means of dutches, by shifting
belts, and by the disengagement of gearing. When the tripping
action is automatic, some design of dutch is generally used to
disconnect the driven member from the driver or source of power.
230
TRIPPING MECHANISMS 23 1
The action of the clutch is controlled in various ways. Shifting
belts are not ordinarily applied to machines as a part of the regu-
lar mechanism, but are very generally used to control the starting
or stopping of an entire machine; dutches are also used ex-
tensively for this purpose. Gearing which is engaged or dis-
engaged to start or stop a driven member is used in some cases.
Feeding mechanisms of some types have a worm-wheel driven
by a worm which is dropped out of mesh when the feeding action
is discontinued. The method of controlling motion may depend
upon the speed of the driving and driven members, and the
necessity of eliminating shocks in starting, or upon some other
factor, such as the inertia of the driven part or the frequency with
which starting and stopping is required.
In considering some of the more common forms of mechanical
devices ot the dass used for starting and stopping, the types of
mechanisms employed to disconnect driving and driven mem-
bers, and also the means of governing the time at which disen-
gagement takes place when such engagement is automatically
controlled, wUl be dealt with. As various tripping devices are
used in conjunction with reversing mechanisms to change the
direction of motion, instead of stopping it entirely, the chapter
on '* Reversing Mechanisms " shows additional applications of
automatic tripping appliances.
Controlling Motion by Means of Clutches. — A dutch is a
form of coupling which is designed to connect or disconnect a
driving or driven member for starting or stopping the driven
part. A dutch consists prindpally of two main sections which
are engaged or disengaged dther at will by a hand-operated con-
trolling device, or automatically by the action of some power-
driven mechanical apparatus, such as a cam connected by suitable
means with the shifting clutch member. There are several dis-
tinct types of clutches which are made in a great variety of de-
signs. The common types of clutches may be divided into two
general classes; namely, (i) those having teeth which interlock,
or positive dutches, and (2), those which transmit motion from
the driving to the driven part of the clutch by frictional contact.
No attempt will be made to describe all classes, but rather to il-
15 A
232 MECHANICAL MOVEMENTS
lustrate some of the more common types and include a few special
fonns as examples indicating variations in clutch design.
Two examples of the positive or tooth dutches are shown at
A and B in Fig. i . The form illustrated at A has teeth with sides
that incline to make them engage or disengage more readily.
One part a of the clutch is fast to one shaft, whereas the other
part b is keyed to the opposite shaft section, so that it revolves
with it, but is free to move in a lengthwise direction. The
shifting of the movable part to engage or disengage it is ordinarily
done by means of a forked lever c which may be operated either
by hand or mechanically. This lever has prongs which either
engage a groove in the shifting member or are pivoted to a ring
d which fits into the groove, the arrangement in either case al-
lowing the clutch to revolve between the U-shaped prongs.
Many clutches of this general type have straight instead of
tapering teeth.
What is commonly known as a " saw-tooth " dutch is il-
lustrated at B. This type is very easily engaged but the driving
member can only be rotated in one direction. There are other
forms of positive dutches which differ in regard to the shapes of
the teeth or the angle of the engaging surfaces. The positive
or tooth type is used when it is not objectionable to start the
driven member suddenly and when the resistance to motion is
not so great as to cause an injurious shock each time the dutch
teeth come into engagement.
Friction Clutches. — When motion is transmitted from the
driving to the driven parts of a clutch simply by frictional con-
tact, the load may be started gradually and without shock, such
as often occurs when a positive clutch is engaged. The differ-
ent types of friction dutches vary in regard to the form of the
friction surfaces and with respect to the kinds of material used
to obtain sufficient frictional resistance. The frictional sur-
faces may be either conical or cylindrical, or in the form of one
or more fiat rings or disks. A simple design of conical dutch is
illustrated at C, Fig. i. Motion is transmitted from part g to
h by the frictional resistance of the conical surfaces. The
effectiveness of any friction dutch as a transmitter of power
TRIPPING MECHANISMS
233
varies with the coefficient or degree of friction between the en-
gaged surfaces. The frictioiml surfaces may both be of metal,
but, in many cases, one member has a metal surface and the
other is partially or entirely covered with some material such as
leather or an asbestos fabric. The cast iron and leather com-
bination is common, and pieces of cork, inserted in holes drilled
in -one member is another common method of increasing fric-
(A and B) PoaltlTs Clatclin: (C and D) Friction Clotdiat
tional resistance. It is common practice to maintain the driving
and driven members of friction clutches in engagement by means
of springs which are compressed in order to release the clutch.
The angle of the conical surfaces b usually about 12 or 13 degrees.
The conical type of friction clutch is simple in constructioa
but rather bulky or large when compared with other types of
equal capacity as transmitters of power. One of the disad-
vantages of a large clutch, aside from the increase in weight and
the space which it occupies, is the natural tendency for a heavy
234 MECHANICAL MOVEMENTS
rotating body to continue in motion. For instance, when a
heavy dutch, which is of necessity made quite large in diameter
to obtain the required amount of fiictional surface, is revolving
rapidly and is disengaged in order to either stop or reduce the
speed of the driven member, it may continue to revolve for some
time after disengagement, which might be objectionable on some
classes of machinery. To avoid trouble from this source, some
automobile dutches are equipped with a brake which is inter-
connected with the foot pedal and only comes into action when
the dutch is disengaged.
Expanding Type of Friction Clutch. — The radially expanding
type of dutch illustrated at Z7 in Fig. i is a form that has been
used very generally, the details of the design being varied more
or less. This clutch consists of an outer casing j in which there
are two expanders or segment-shaped pieces connected by right-
and left-hand screws at k and /, respectively. These screws
are attached to levers w, which, in turn, are connected to the
sliding sleeve py by links n, thus forming toggles between the
sleeve and the screws. The two expanders and the toggle mech-
anism are caused to revolve with the shaft by a central driving
hub q. The dutch is operated by shifting the sliding sleeve
and toggles as indicated by the full and dotted lines; this move-
ment turns the screws having right- and left-hand threads far
enough to dther expand the inner members tightly against
the outer casing or to withdraw them from frictional contact.
The expanders referred to are lined with maple grips, in this
particular case, to increase the frictional resistance.
Ring or Plate Clutches. — The type of friction dutch shown
in Fig. 2 has two friction rings A and B which are gripped between
flange C and the rings D and E when the dutch is in engagement.
The rings A and B are not rigidly attached to the outer casing,
but are driven around with the casing by keys or feathers.
The driving plates or rings D and E are keyed to the hub of
flange C and this hub, in turn, is keyed to the shaft. The two
driving rings D and E are free to move along the hub, and the
outer ring E is connected to the toggle mechanism shown.
When the sliding collar engages the ends of the toggle levers, out-
TRIPPING MECHANISMS 235
ade driving plate E moves back against the driven plate B
which forces the central driving plate D and the driven plate A
back against flange C with considerable pressure, thus engaging
four frictional surfaces. The two driven rings A and B contain
wooden inserts or blocks to increase the frictional resistance.
Some dutches of this general type have one ring which is gripped
between a stationary and movable ring, thus giving two frictional
surfaces. There are also other modifications of this type.
Multiple-disk Clatches. — By using quite a number of disks
or rings instead of one or two, the diameter of the clutch may
Fie »■ PUte or Rlnc Clntcli
be reduced without sacrificing the contact area or the amount
of frictional suHace. The advantage of the smaller and more
compact clutch, especially on automobiles^ has been referred to.
Clutches of the disk type are now applied to many automobiles.
The driving member of the clutch has a number of disks which
alternate with other disks connected to the driven member.
One set of disks may be of soft steel and the other set of phos-
phor-bronze, or some other combination may be employed. For
instance, some disks are provided with cork inserts.
The general arrangement of a multiple-disk clutch as applied
to an automobile is illustrated in Fig. 3. The engine flywheel A
transmits motion throu^ keys to the driving disks B. These
336 MECHANICAL MOVEMENTS
disks alternate with the driven disks which engage keys on drum
C; this drum, in turn, transmits its motion through a connecting
shaft to the gear set enclosed in casing D where the speed changes
are obtained. While the clutch disks must revolve with their
respective driving and driven members, they are free to move
laterally, so that all the disks may be firmly pressed together in
order to eng^e the clutch. The pressure required to force all
the disks into contact is derived from a spring E. The clutch
is controlled by a pedal attached to lever F which releases the
Kg. 3. llnltipte-ditk Clotcli appUed to AotomobU* TtaumlHlon
spring for engaging the clutch and compresses the ^ring for
releasing the pressure on the disks. Clutches of this kind are
generally enclosed in an oil-tight case, so that the disks can be
kept well lubricated. Some disk clutches, however, do not
operate in an oil bath. These " dry-plate " clutches have one
series or set of disks which is faced with some special friction
material, such as asbestos-wire fabric.
PneumaticaUy-operated Multiple-disk Clutch. — While most
clutches are engaged and disengaged by mechanical means, com-
pressed air or water under pressure may be employed. A mul-
TRIPPING MECHANISMS
337
tiple-disk clutch designed for pneumatic operation is shown in
Fig. 4. The driving shaft A has keyed to it casii^ S, which
engages six friction disks C. These disks alternate with an eqtial
number connecting with a hub attached to the driven shaft D.
The disks are enclosed in the casing by cover £ which is bolted
to casing B and is free to turn on the driven shaft Z), Surround-
ing the driving shaft is a sleeve ¥, which is connected at G
with a pipe for supplying the compressed air. The annular
groove in the center of this sleeve connects with a hole that
extends to the end of the driving shaft, and through which air
Fig. 4. Pn«imutlMlljH>p*rat*d Mnltl^e-diak Ctvtch
is admitted back of the circular piston H, which holds the disks
firmly together when the dutch is engaged. The sleeve F is
provided with a stuffing-box and gland at each end to prevent
the escape of air. This sleeve remains stationary and the shaft
revolves in it. The clutch may also be operated by water under
pressure.
Multiple-disk Clutch ei^uipped with Brake. — It is sometimes
necessary to start and stop machines or certjun parts of machines
smoothly, with great rapidity, and in synchronism with other
moving parts. With light or slow moving apparatus^ the prob-
lem is relatively simple, but the difficulties multiply as weight
and speed are increased. The clutch mechanism shown in Fig.
S has proved very efficient for the class of service mentioned.
338 MECHANICAL MOVEMENTS
This design of clutch is used on a machine transmitting a load
of 20 horsepower and operating about 3600 times per day, under
unusually trying conditions. This machine picks up its load
from dead rest, makes three revolutions and comes to rest again
in three-fifths second, or at an average rate of 300 revolutions per
minute, without the slightest shock or effort. When it is con-
sidered that the dutch drum is driven at only 340 revolutions per
minute, and the engagement is only a fraction of a second, it
will be seen that the slip is very slight indeed. The absence of
shock may be attributed to the perfect cushioning of the pressure
applied to the dutch and to the liberal friction area provided,
there being nearly a square inch for each poimd of pull at the
average radius of the disks.
The device consists essentially of two multiple-disk friction
dutches of the dry type moimted tandem on a single sleeve
which is fitted to slide, but not to turn, on a shaft that is di-
rectly coupled to the intermittent load. The driving dutch is
shown at A and the brake dutch, at B. The two dutches are
built up in the usual form for disk dutches, that is, with two al-
ternate series of disks, one keyed to the driving member and the
other to the driven member; one set is preferably faced with
friction fabric. One series of disks in a set is provided with
internal projections to engage longitudinal slots on the sleeve,
while the other disks have external projections loosely fitting
the internal slots of the driving and braking dutch drums.
The projecting lugs on the disks are rdnforced to provide greater
bearing surface on the sides of the slots in which they travel.
As both dutches are mounted on the same sleeve, and the outer
part of the driving dutch is continuously driven, the sleeve be-
comes the driven member of the driving dutch and the driving
member of the brake dutch. The driven member of the brake
dutch is solidly bolted to the frame of the machine of which
the dutch constitutes a part, so that, in reality, it is not driven,
but acts as a brake to bring the sleeve to rest when this dutch
is engaged.
Both the dutch dnuns are built in skeleton form to fadlitate
the egress of material wearing off the friction facings, and to
TRIPPING MECHANISUS 239
permit of the easy application of castor oil to the facings. If
this treatment is not neglected, a set of facings may last two years
or more in constant service, but, if the facings are allowed to
become entirely dry, they will be less durable. The sleeve is
provided with a flange on each end so that, when it is moved end-
wise, the disks of one of the clutches will be clamped between one
of the sleeve flanges and the head of one of the clutch drums,
while the pressure on the disks of the other dutch will be re-
leased. Movement of the sleeve in the opposite direction will
Hs. 3. Qnick-actliic HnlUple-diik Clatcli Sii4 Braks CombLoatlMi
release the disks of the first dutch and clamp those of the second.
In the illustration, the parts are shown in the portion of rest, or
with the driving dutch disengaged and the brake clutch set.
The controlling mechanism is operated pneumaticaUy and may
be made automatic by connecting with other moving parts to
actuate the valves. The actual movement of the sleeve which
engages and disengages the dutches is derived from two c^)posed
pneumatic cylinders and the connections shown. It will be ap-
parent that the cylinders must work alternately, that is, when one
is under pressure the other must be open or free to esthaust. The
distribution of air is controlled by two valves, together with a
240 MECHANICAL MOVEMENTS
series of interconnecting pipes. With the valves in the " up "
position, compressed air is free to pass through the pipe to one
of the cylinders and to the top of the other valve for forcing it
down, cutting oflF the air supply of the cylinder it serves, and
opening it to exhaust.
A small hole near the live-air inlet leads to the annular space
below the valve proper, around the stem, and is open continu-
ously, admitting air to hold the valve in the " up " position
when so placed. As the only connections between the controlling
valves and the cylinders are pipes, the control may be somewhat
remote and placed in any convenient position. Experiments
have been made to determine the practicability of operating the
valves magnetically, and also of moving the clutch sleeve by
means of magnets, but both have been found far less efficient
and much slower than air, the slowness of the electrical operation
being due to the time required for the magnets to " build up."
The drift of the shaft after the operation of the stopping valve
has been found to be very small and practically constant, the
shaft stopping within a few degrees of the same position every
time. Any wear on the friction disks or their facings is auto-
matically compensated for by additional travel of the pneumatic
pistons, so that mechanical adjustments are rarely required.
Magnetic Clutch with Automatic Band Brake. — The mag-
netic clutch illustrated in Fig. 6 is equipped with an electrically
operated brake which acts automatically when the clutch is re-
leased, in order to stop the driven part as quickly as possible.
The driving shaft carries the field A which is provided with a
magnetizing coil B. The hub C on the driven shaft has at-
tached to it a flexible spring-steel disk or plate D. This plate
carries the armature E which is prevented from coming directly
into contact with the magnetizing coil by a ring of frictional
material at F. This friction ring, which is made of woven as-
bestos and brass wire, provides a frictional surface for driving.
The ends of the winding of the magnetizing coil are attached to
the rings G which are in contact with a pair of brushes H con-
nected with the electrical circuit. The automatic brake, which
is of the band type, engages drum 7, and the ends of the band
TRIPPING MECHANISMS 241
are pivoted to lever K at two points a3 shown. Tbe plunger of
a solenoid enclosed in cylinder L is attached to lever K, and at
the outer end of this lever there is a weight which serves to apply
the brake when the clutch is disengaged.
In the operation of this clutch, the current is gradually ad-
mitted to the magnetizing coil by means of a rheostat. The
magnetic attraction between this coil and the armature causes
the friction ring J^" to be held firmly against the driving member,
so that motion is transmitted between the driving and driven
shafts. The solenoid is also energized so that lever K is pulled
upward and the band brake about drum J released. This brake
is held in circular form and out of contact with the drum by a
spring and rod O. As soon as the circuit is broken, the clutch
is released, and the solenoid allows the weighted lever K to fall,
thus supplying the brake automatically to the driven part.
This feature is of particular advantage when the driven side of
the clutch is connected to some part which tends to revolve quite
a long time alter disengagement.
Induction Clutch. — The induction clutch shown in Fig. 7 is
similar in its operation to an induction motor. This particular
form of clutch is applied to an electrically-driven planer. The
copper ring C is the driven member and it is held by a spider A,
the bub of which contains the bushing b. This spider runs loose
OQ the shaft and its hub carries a pinion through which power
242 MECHANICAL MOVEMENTS
is transmitted. All the other parts shown belong to the driving
member which is keyed to the continuously running motor
shaft This driving member, which acts also as a flywheel,
consists of the two-part steel castings E and F, the coil G, and the
collector rings D. The copper ring C has nmning clearance be-
tween castings E and F, and, since it is nonmagnetic, it has no
tendency to be drawn over towards the poles on either side. Tlus
ring has, however, a high conductivity and, because of this fact
and its position with relation to the revolving magnetic driving
member, it is pulled along by this driving member on the same
principle as that of the induction motor. Two of these clutches
a tliB PrindplB ot tbB bl-
are employed, one for the cutting and the other for the return
stroke, and a switch worked by dogs admits a small current to
one clutch on the cutting stroke and to the other clutch on the
return stroke. The induction clutch trjinsmits power without
contact between its driving and driven members.
Clutches that Automatically Disengage. — The clutches used
on power presses are designed to automatically disengage after
making one or more revolutions. The clutch connects the fly-
wheel or driving gear of the press with the driven shaft, whenever
it is tripped, by pressing down a foot-treadle. As long as this
treadle is held down, the clutch remains in engagement and the
press continues to run; if the treadle is released, the clutch is
disengaged when the ram or slide of the press is approximately
TRIPPING MECHANISMS 243
at the top of its stroke. The downward movement of the treadle
releases a pin, key, or some other fonn of locking device which
quickly engages the driving member; when the treadle is re-
leased, the locking device encoimters some form of trip or cam
siu:face which withdraws it and stops the press. There are
many designs of clutches of this general type and the examples
to be described will illustrate the general principles governing
their operation.
Automatic Clutches of the Key Type. — Fig. 8 shows a clutch
of the type having a key which is engaged or disengaged with
the hub A of the flywheel.
This flywheel revolves freely
on the shaft until the dog D
is pulled down by the action
of the foot-treadle; then the
key C is forced downward into
engagement with the flywheel
by a strong steel spring E.
When the foot-treadle is re-
leased, the dog D is forced up, Pi«. 8.
and when key C comes into
contact with the dog, it is pushed back into the shaft, thus allow-
ing the flywheel to again run freely. If the treadle is depressed
and then released, the press will make one revolution before
stepping, but if the treadle is held downward, the press will
continue to run. This clutch is equipped with a safety device
to prevent the ram or slide of the press from descending un-
expectedly while setting dies or making adjustments. This
safety device consists of a steel ring F having a keyway or slot
in it for receiving the key C. When the press slide is at the top
of its stroke and dog D is up, the key is entirely within the shaft
and may be held in this position by turning ring F, thus pre-
venting accidental engagement of the clutch. Ring P has an
extension arm that enables it to be turned readily.
A dutch is shown in Fig. 9 that has a rocking key instead of
one that moves radially. This key A extends across the shaft
and, when the press is not in motion, the key rests in a semi-
344 MECHANICAL MOVEMENTS
circular seat and occupies the position shown in the end view.
When in this position, the lever B at one end of the key is in en-
gagement with the latch C, which is connected with the foot-
treadle. As soon as latch C is swung out of the way hy depres-
^ng the treadle, lever B and the key tend to turn as they are
acted upon by the compressed spring E. "When the flywheel
has turned far enough to bring one of the recesses F oppodte
the key, the latter, by making a quarter turn in its seat, engages
the recess and locks the flywheel and shaft leather. If the
Fl(. g. Automatic Clntch of Tainiiig-kay Tjpa
treadle is immediately released, thus allowing latch C to swing
back to the vertical position, it will engage lever B when it comes
around and force this lever and the key back out of engagement
with the flywheel.
Clutches Engaged by a Wedging Action. — Some designs of
automatic clutches are engaged by a wedging action of some
locking member between cam or eccentric surfaces, instead of
employing pins or keys. An example of the cam type of clutch
is shown at A, Fig. lo, A cam a, having a series of eccentric or
cam surfaces, is keyed to the crankshaft, and surrounding this
TRIPPING MECHANISMS
245
cam there is.a slotted ring c containing rollers b, which, in turn,
are surrounded by a hardened tool steel ring d. These parts are
inserted in a recess formed in the hub of the flywheel. On the
slotted ring c, there is a lug / which is in engagement with the
pivoted stop lever e when the press is not in operation. As soon
as the stop lever is drawn downward by means of the foot pedal,
the rollers are carried aroimd by the action of the flywheel until
they are wedged tightly between the cam surfaces and the outer
ring d; the crankshaft is then driven with the flywheel and con-
tinues to revolve imtil lever e is released and, by striking stop /,
AntoBuUc ClntclMi of tb« Cun or Wedglns Type
throws the rollers out of engagement. The slotted ring c has
a spring attached to it (not shown) which turns the ring and
rollers toward the hi^ points of the cam when the ring is re-
leased by the lowering of lever e.
The design of clutch illustrated at B is equipped mth an ec-
centric h which is solid with the crankshaft and a wedge-shaped
member j which serves to lock the flywheel and crankshaft
together. This wedge y is located between the eccentric and a
ring k inserted in a recess in the hub of the flywheel. The ring
is split and compressed somewhat so as to exert a pressure against
the wall of the recess. When the stop s is in engagement with
246 MECHANICAL MOVEMENTS
pin fij the fljrwheel simply revolves about the expansion ring k.
When stop 5 is withdrawn, the ring k expands, and, as it begins
to revolve with the flywheel, the wedge j is forced between the
eccentric h and the inside of the ring; consequently, the flywheel,
expansion ring, and the shaft are firmly locked together. When
the foot pedal is released and stop 5 engages pin n, the ring con-
tracts and remains stationary while the fljrwheel continues to
revolve. The surface at m serves as a brake, so that the crank-
shaft is stopped when the slide is approximately at the top of
its stroke.
Variable Clutch Control by ''Pattern Chain.'' — When
clutches are engaged or disengaged automatically, their action
is usually controlled either by cams or some form of revolving
carrier having one or more lugs or dogs that engage the clutch-
operating lever. The ingenious method of controlling clutches
illustrated at il in Fig. 1 1 is applied to a textile machine known as
a " twister '' and used for producing fancy yams. The variations
in the yam are obtained by controlling the action of two sets of
delivery rolls. The lower rolls r and ^ of each set support the
upper rolls c and d, Splined to the end of roll r is a shifting clutch
member e which revolves the roll when engaged with the clutch
teeth on the hub of gear/. A similar clutch and gear combi-
nation is located at g for driving the lower set of delivery rolls.
The upper clutch is connected with lever q pivoted at A, and the
lower clutch, with lever j pivoted at k. The action of these
clutch levers is govemed by a pattem chain / suspended on
a drum m. As this drum revolves, the rollers of the pattem
chain come into engagement with the lower ends of the clutch
levers, thus shifting the clutches in and out of engagement. By
changing the position of the rolls or risers of the pattem chain,
the pattem of the yam may be varied and different fancy effects
be obtained. The chain drum is revolved by means of change
gearing for varying the speed according to requirements. The
clutch gears are rotated continuously, and the delivery rolls are
only stopped when a knob or knot is being formed, both sets of
rolls being rotated while the yams are being twisted together
between the knots.
TRIPPING MECHANISMS 247
Another applicatioa of an endless chain for controlling the
engagement and disengagement of a clutch at predetennined
intervals is illustrated at B, Fig. 11. This mechanism is applied
to a loom. The vertical shaft a is driven through bevel gearing
(not shown) at the lower end, from the driving shaft of the loom.
The upper end of shaft a carries a clutch member b, which is en-
gaged by the shifting clutch member c splined to shaft d. Shaft
d, through the bevel and spur gearing shown, is connected with
the chain drum or cylinder e carrying the clutch controlling chain
/. Above this chain, there is a lever g pivoted at k and connected
by link i with another lever/ pivoted at k. The pin I connecting
the link and lever engages a slot in bellcrank m, the movements
of which are controlled by a spring n and a connector which
extends to another part of the machine. The vertical slot in
lever m has a short horizontal section at the upper end.
The action of the mechanism is as follows: When the clutch
348 MECHANICAL MOVEMENTS
members are engaged, the chain drum and chain revolve, and
when one of the links p engages lever g, the lower leverj £5 raised,
thus locating pin q in the upper part of the annular groove of
the shifting clutch member. As soon as pin / at the end of lever^
reaches the upper end of the vertical slot, the bellcrank lever m
swings over imder the action of spring n, thus engaging pin /
with the horizontal part of the slot and locking the lever j in the
upper position. As soon as the lever j is raised, a projection
engages pin q and disconnects the clutch, thus stopping the ro-
tation of shaft d. The link p on the pattern chain is no longer
under the roller of lever ^, but this lever is still held in the upper
position, by the engagement of pin / with the horizontal slot
in bellcrank lever m. The clutch remains disengaged until the
connector swings the vertical part of lever m to the right, thus
allowing the upper clutch member c to re&gage the lower part.
The movements of the connector are controlled by another
chain which operates on the same general principle as the one
referred to.
Tripping Mechanisms. — What are known as "tripping"
mechanisms are applied to various kinds of machinery to stop
the movement either of the entire machine or of some part of it.
Automatic tripping devices generally operate in conjimction with
a clutch, or they are used to disengage intermeshing g^ars.
The trip may be adjustable and be set beforehand to act after
a certain part has moved a given distance, or it may only act
when a machine begins to operate under abnormal conditions.
The adjustable form of trip, if for a part having a rectilinear
motion, may consist simply of a stop which is placed in such a
position that it will disengage a clutch after the part under the
control of the trip has moved the required distance. If a rotary
motion is involved, the same principle may be applied with
whatever modification of the mechanism is necessary. When
the trip is designed to act automatically only when the machine
is operating under adverse conditions, the action may be gov-
erned by variations of pressure or resistance to motion, or the
product on which the machine is working may cause the trip
to act in case the operation is not as it should be. The following
TRIPPING MECHANISMS
249
examples will illustrate a few of the applications and the possi-
bilities of tripping mechanisms of different types.
Trip which Disengages a Clutch. — One of the simplest forms
of automatic tripping mechanisms is illustrated diagrammatically
at At Fig. 12. This general type is applied to some classes of
machine tools for disengaging the feeding movements of a tool-
slide at a predetermined point. The tool-sUde, which may be
the carriage of an engine lathe, is moved along the bed by a
feed-screw a or a splined rod which is rotated through a clutch
b. The shifting member of this clutch is operated by a lever c
the lower end of which connects with rod d. This rod extends
along the bed a distance equivalent to the carriage movement and
Fig. xa. Simple Fonm of Autonuitic Tripping Mecluuiitms
carries an adjustable stop collar e, which is engaged by some pro-
jecting part/ on the carriage; when this engagement occurs, the
rod is shifted in a lengthwise direction, thus throwing the clutch
out of mesh and stopping the feeding movement. Obviously,
the point at which disengagement occurs depends upon the
position of stop collar e which is set in accordance with the length
of the part to be turned. There are other trip mechanisms of
the clutch-shifting type which differ from the kind described
in regard to the details of the mechanism for shifting the
clutch.
Trip which Disengages Gearing. — Diagram B, Fig. 12,
illustrates a form of automatic trip which serves to disengage
worm gearing instead of a clutch. The worm g revolves worm-
250 MECHANICAL MOVEMENTS
wheel h and the table feed-screw. This wonn is carried by an
arm j pivoted at k and held in position by the engagement of
lever / with a notch in lever m. When the adjustable trip dog n,
attached to the work table, strikes lever m and swings it about
pivot py the worm g drops out of engagement with worm-wheel h
and the feeding motion stops. The point of this engagement may
be varied at will by simply changing the position of the trip dog
n. Some of the trip mechanisms on vertical drilling machines
operate on this same general principle.
Many different designs of automatic tripping mechanisms,
especially of the type used on machine tools for controlling feed-
ing movements, are of the same principle as those described,
in that trip dogs are attached either directly to the driven mem-
ber or to some auxiliary mechanism such as a revolving disk
geared to the driven part, and these dogs stop the feeding move-
ment either by disengaging a clutch or gearing. If the feeding
movement is intermittent and is obtained through ratchet gear-
ing, the pawl may be prevented from engaging the gear teeth of
the ratchet wheel after the latter has turned a predetermined
amoimt An example of this type of tripping device is described
in Chapter VI (see Fig. 3).
Automatic Stops for Drilling Machine. — Fig. 13 shows a side
elevation and plan of an automatic stop or trip for a vertical-
spindle drilling machine, which operates by disengaging a friction
dutch. The feeding movement is transmitted to the spindle from
the friction gear c to the disk d and through worm gearing at ife to
a pinion meshing with rack / attached to the spindle sleeve. The
position of friction gear c is controlled by hand lever g which,
through link e, lever/, shaft a, and collar b moves the friction gear
in or out of engagement with disk d. Lever g is held in the
engaged position by the latch or trigger n. An adjustable stop
collar h is set by means of graduations to automatically disengage
the feed after a hole has been drilled to whatever depth is re-
quired. This collar acts by simply striking the end of latch »,
thus releasing lever g and the friction gear c. Any wear in the
friction clutch is compensated for by adjusting set-screw j in
the end of connecting link e.
TRIPPING MECHANISMS a$l
Du^z Antomatic Trippliig Mechanism. — Another form of
tripping device for a vertical-spindle d rilling machine i$ illus-
trated at B, Fig. 13. This stop may be set to disengage the wonn
« from the worm-wheel on the pinion shaft, or it may be utilized
to disengage miter gear g which drives the worm-shaft. The
tripping dog is attached to a bracket or arm a clamped to the
feed rack on the sleeve. The dog b may be swung so as to engage
either levers c or if ; as shown in the plan view, it is in the latter
position. Lever c controls the engagement of worm e with wheel
/, whereas d serves to disengage the bevel gear g. When the
worm is cut of mesh, the spindle may be moved vertically by the
hand-feed lever, for fadng or similar operations, after a hole has
been drilled. Ordinarily, gear g is disengaged, but this does not
leave the spindle free for rapid adjustment.
Adjustable Dial Type of Tiipi^ Mechanism. — The auto-
matic trij^ing mechanism shown in Fig. 14 is applied to Colbum
drilling madiines and may be adjusted to disengage the down-
353 MECHANICAL MOVEMENTS
ward feeding motion of the drill at any depth up to 14 inches.
The feeding movement is transmitted through the drill spindle
from shaft A, through worm gearing, to shaft B which has a
pinion engaging the rack, on the spindle quill. The automatic
disengagement of the feed is controlled by the engagement of
pawl H with lever N. The distance that the spindle feeds
downward before the feed is tripped is regulated by the graduated
adjustable dial /. The graduations on this dial indicate ^ inch
of the spindle travel, and one complete revolution represents
7 inches of spindle travel. The pawl 5 is so designed that it
can be set to allow two revolutions of the dial before engaging
lever JV.
The operation of the mechajiism is as follows: If the feed is
to be tripped automatically in 7 inches or less, pawl F is set as
indicated by the dotted lines at K; if it is desired to trip the feed
at a distance greater than 7 inches, pawl H is turned to the po-
sition shown by the full lines. For example, if it should be
required to automatically trip the feed at a depth of 3 inches,
the knurled nut L would first be loosened and the graduated
dial / turned until the figure 3 on it was opposite the mark on
TRIPPING MECHANISMS
253
pointer /, after which nut L would be tightened. The pawl
H would then be set in the position shown by the dotted lines,
with the result that, when the drill had traveled 3 inches, the sur-
face M would come into contact with the side N of the trip arm
and disengage the feed. On the other hand, if it were required
to drill to a depth of 9 inches before the feed was automatically
tripped, the dial I would be set with figure 2 opposite the mark
on pointer /, and pawl H would be turned to the position shown
by the full lines. With the pawl in this position, the contact
of surface O with lever N would not throw out the feed, as the
pawl, being loose on its stud, would simply turn and pass the
Fig. 15. Safety Tripping DoTice for Wire-winding Machine
tripping arm without moving it. After the pawl had passed
the arm, it would then be in the position shown by the dotted
lines, that is, with the end in contact with a projecting sleeve,
as at Ky thus preventing further rotary movement, so that, when
it again came aroimd to the tripping lever, the feed would be
disengaged. If the knurled nut L is loose, the feed cannot be
automatically tripped at any point.
Trip for Wire-winding Machine* — The diagram. Fig. 15,
shows an automatic tripping device that is applied to a machine
used for winding small wire onto spools. In this illustration, A
represents the reel which contains the stock of wire, and B is
the spool upon which the wire is woxmd. This spool is driven
2S4
MECHANICAL MOVEMENTS
at a constant speed. If, for some reason, the wire should not
uncoil easily from red A, it might be broken or the mechanism
damaged, assuming that the wire passed (firectly from the reel
to the spool. In order to avoid trouble from any resistance to
uncoiling which may occur, the wire, after leaving the reel, is
guided by idler pulleys, so as to form a loop; at the end of this
loop, there is an idler pulley C mounted on a lever D which is
free to swing about fulcrum E. When the uncoiling and winding
is proceeding under normal
conditions, the weight of lever
D is sufficient to prevent the
wire from lifting it; any ab-
normal resistance, however,
such as might be caused by
a kink on reel Ay will result
in swinging lever D upward
into contact with trip G,
which, by disengaging a
clutch, stops the machine.
Tripping Devices for Tex-
tile Machines. — Some verv
ingenious tripping mecha-
nisms or " stop motions " are
applied to different classes of
textile machines. The exam-
ples described illustrate the possibilities of the use of compara-
tively simple devices for automatically controlling the action of
machines under conditions which might, at first, seem to be very
complex and difficult.
The stop motion shown in Fig. i6 is applied to a machine used
for twisting yam. The yam passes from the guide wire at A
around the rolls B and C, through an eye in wire D and out
through the guide at E. The wire D is attached to another wire
F, which is normally held by the yarn in the position shown
by the full lines. If the yam or thread should break, the wires
fall to the position shown by the dotted lines, thus bringing wire
F into engagement with the lower roll C. Contact with this
Fig. x6. Tripping Device for a TeztOe
Machine
TRIPPING MECHANISMS 355
roll immediately moves the wires to the left until a tongue G enters
between the rolls and raises B out of contact with C, which
prevents it from revolving and stops the delivery of yam.
Another sUtp motion which acts when a thread is broken is
shown in Fig. 17. This mechanism is applied to a machine used
for winding thread on spools. It is designed to raise the spool
out of contact with a flange which drives it by friction, if a thread
breaks, thus arresting the motion of the spool without sto[^ing
the spindle on which the spool is mounted. The device is also
arranged so that the wire which drops when a thread breaks is
nused automatically to its normal position for re-threading.
Fig. 17. Anothw Tripping Darica or "Stop Motloa" for ■ Textile UtchliM
The thread A passes through the eye of a drop wire B and serves
to hold this wire in its normal position. Attached to this wire
there is a lever C pivoted at D and connected by link E with the
catch F. The lever G is normally held in a horizontal portion
by catch F. If a thread breaks, however, the dropping of wire
B releases catch F and lever G falls to the position shown in the
illustration. This lever is connected by a rod B with a sleeve
/ pivoted at K. The downward movement of lever G swings the
sleevt about its pivot and brings a pin imder the flange R of the
spool, thus raising it from the supporting disk L, as shown in the
illustration; at the same time, the flange of the spool engages a
rubber disk m which stops the rotation. Attached to the shaft
of lever G, there is a small finger O which is given a partial turn
2S6
MECHANICAL MOVEMENTS
when the catch lever falls. As the result of this movement, the
finger engages lever C and swings it with the drop wire B back
to the normal position ready for re-threading. As soon as the
catch lever has been reengaged with the catch Fy the spool drops
into contact with its driving flange and again begins to wind the
yam.
Electrical Control for Textile Machines* — Certain classes of
textile machines are equipped with some form of electrical con-
trol for automatically stopping the machine when it is operating
under abnormal conditions. A simple method of controlling a
machine electrically is found on some drawing frames. The
Flf* x8. Simplo Ponn of n«ctrical Control for Stoppinc ft Loom whon
A Throad Broaki
upper and lower sections of the machine frame are insulated
from each other, and one pole of a small dynamo is connected
to one frame section and the other pole to the other section.
The cotton, which is a non-conductor and is constantly passing
between the different pairs of rolls, prevents the completion of
the electrical circuit except when the cotton breaks and both
rolls of a pair come directly into contact with each other. When
this occurs, the electrical circuit thus formed, acting in conjunc-
tion with an electromagnet, swings a lever into the path of a
revolving trip or catch which, as its rotation is stopped, either
shifts a belt from the tight to the loose pulley or disengages a
clutch by means of suitable mechanism.
A very simple form of electrical controlling device is shown
TRIPPING MECHANISMS 257
in Fig. 18. This device is applied to looms and operates when-
ever a thread breaks. The steel spring wire A is normally held
between two threads in the bent position shown to the left.
If one of the warp threads should break, the spring wire is im-
mediately released and flies over to the left into engagement
with rod B, as shown to the right, thus dosing an electrical
circuit. This circuit is a comparatively weak one and stops
the machine by means of an electromechanical type of mechanism.
The actual force required for stopping the machine is some-
times considerable, and it is derived by a moving part of the loom,
the electrical mechanism simply being used to cause a locking
effect that enables the other part of the mechanism to operate.
Tripping Mechanism of Drop-hammer. — When a board type
of drop-hammer has fallen and is reboimding, the friction rolls
grip the board and elevate the hammer preparatory to the
delivery of another blow. The eccentrically moimted gripping
roll is moved inward against the board for elevating the hammer,
when a '^ friction bar " is released by a tripping mechanism and
allowed to fall. Most of these tripping devices operate on the
same general principle as the design illustrated at il in Fig. 19.
The friction bar a is attached at its upper end to a lever that
controls the position of the eccentrically mounted friction roll;
when the bar falls, the Ufting board is gripped between this
front roll and one at the rear that revolves in one position. Be-
fore the friction bar is released, the lower end rests upon a seat
which prevents it from falling. When the hammer c descends,
an incline surface d on it engages bracket b and pushes bar a off
of its seat. The weight of this bar is sufficient to give the roll
referred to the required gripping pressure on the board /, so
that the hammer is lifted to the top of its stroke. As the hammer
rises, it engages a lever and raises the friction bar which, in this
particular case, is returned to its seat by a spring-operated
guide g. In order to operate the hammer properly, it is necessary
to release the friction bar at exactly the right time, which must
be varied according to the thickness of the hammer dies.
The tripping mechanism must be so set that, as the hammer
rebounds, its upward movement is continued by the action of
2$& UECHANICAL MOVEMENtS
the friction rolls. If the release of the friction bar occurs too
soon, the rolls will grip the board either before the hammer
strikes its blow or before it has had time to rebovmd. On the
other hand, if the release occurs too late, the hammer will fall
bade after rebounding and the roll will have to pick up a " dead "
or stationary load. The pdnt of release depends upon the ver-
tical position of bnu^et b.
Fl|. 19. Board Dn>p-li«mmir Tripping Hadianlanu
A trip mechanism of the swtn^ng latch type is shown at B,
Fig. 19. In this case, the friction bar k is heid in the upper po-
sition by a catch / which engages a slot in the bar and is attached
to the diort vertical shaft m. This shaft also carries a lever »
that extends out far enough to engage an inclined surface on the
hammer. As the hammer descends, lever n, bar m, and catch I
are turned, thus releasing the friction bar k and allowing the rolls
TRIPPING MECHANISMS
359
to grip the board for elevating the hammer. The point at
which release occurs may be varied by fhj^"gi"g the vertical
portion of lever n.
Breakable Pins to Prevent Overload. — Some types of ma-
chines are so arranged that any unusual resistance to motion
will automatically stop either the entire machine or whatever
part is affected, in order to prevent damaging the mechanism
or straining it exces^vely. A mnple form of safety device
consists of a pin which shears off
or breaks in case the overload
becomes excesave. The sprocket
A shown in Fig. 30 is provided
with a pin of this kind. This pin
C connects the driving hub B
with the hub of the sprocket.
The sprocket, instead of being
keyed to the shaft, is loosely
mounted on it, and the hub B
is keyed to the shaft instead.
The pin C is grooved or reduced
in diameter an amount depend-
ing upon the nm»imiim amount
of power to be transmitted. If
this pin is subjected to an un-
usual strmn, it will break, thus
leaving the wheel free and pro-
tecting the driven parts.
This same method of protection against overload has been
applied in various ways, and, while it is simple, there are certain
disadvantages. In order to avoid replacing a broken pin, the
machine operator sometimes inserts a pin that is stroi^r than
it should be to afford adequate protection against injurious
strains. The ideal safety device is one which does not break in
case of overload, but simply disengages and is so arranged that
it can readily be reengaged. In electrical work, this principle
has been applied by substituting drcuit-breakers for fuses which
melt when the current becomes excessive.
Fl(. 10. Sprocket drlvMi throngli
Pin whleh bTMki In C«m of
BxcMdT* Ovtrioail
26o MECHANICAL MOVEMENIS
Antonuitlc Clutch Contnd to Prennt OreriouL — The prin-
ciple governing the operation of an automatic device for difien-
^ffng a dutch when the overload becomes excessive is illus-
trated by the diagram, Fig. 31. This mechanism vas applied
to a metal-cutting machine, the object being to automatically
disengage the feed in case the resistance to the rotation of the
tool becomes abnormally bl^. The mechanism is also arranged
to reverse the feeding movement if, for any reason, the excessive
re^tance should continue after the feed has been disengaged.
The spindle to which the cutting tool is attached is represented
at A. This spindle is driven throu^ worm-wheel M and worm
L from the driving shaft B, which receives its motion from a
countershaft through a belt operating on pulley K. The driving
shaft B is free to move in a lengthwise direction within certain
limits. The dutch C is keyed to this shaft so that it will rotate
and move azially with the shaft. The gears D and F on each
side of dutch C are free to revolve upon the shaft, but are pre-
vented from moving in a lengthwise direction. The inner ^de
of each gear is provided with dutch teeth correqxmding to those
TRIPPING MECHANISMS 26 1
on dutch C, which is used to lock either gear to shaft B. The
shaft /, which transmits feeding movement to the cutting tool,
is driven either through gears D and E or through gears F, P,
and H. When clutch C engages gear Z?, the cutting tool is fed
forward by shaft /, and a reversal of the feeding movement
is obtained when clutch C is shifted into engagement with
gear F.
When clutch C engages with gear D, excessive resistance
to the motion of the cutting tool will cause the clutch to be
shifted to the neutral position, thus stopping the feeding move-
ment. This automatic action is obtained as follows: The
shaft B is normally held by spring N in such a position that
clutch C engages gear D, so that the feeding movement is for-
ward. The tension on this spring is regulated by the nut shown.
In case the resistance to the rotation of the cutting tool and
spindle A should become excessive, the pressure between the
teeth of the worm L and the worm-wheel M causes the wonn
to move in the direction indicated by the arrow, the worm-wheel
acting somewhat like a nut. This lengthwise movement of
worm-wheel L and shaft By against the tension of spring iV,
disengages clutch C from gear D and stops the feeding move-
ment. If the resistance to rotation again becomes normal,
clutch C is automatically returned into engagement with gear
D. On the other hand, if the resistance to rotation increases,
clutch C may be drawn over into engagement with gear F,
thus reversing the feeding movement.
Other mechanical devices for automatically disengaging the
driven member whenever the resistance to motion increases
excessively are shown at A and B in Fig. 22. These devices oper-
ate on the same general principle as the one previously described,
but differ somewhat in regard to the arrangement. The mech-
anism illustrated by diagram A is designed to allow a worm-
wheel to make one revolution and then stop; the movement,
however, may be discontinued before the revolution is com-
pleted, if the resistance to rotation becomes excessive. The
sleeve a is revolved constantly by a pulley on its outer end.
The inner end of this sleeve has clutch teeth intended to engage
362 MECHANICAL MOVEMENTS
corresponding teeth on the end of sleeve b. The latter is at-
tached to the shaft and both are free to move slightly in an end-
wise direction. The body of sleeve b is threaded to form a
worm which engages worm-wheel c. The spring e tends to
shift sleeve b to the left and into engagement with clutch teeth
on sleeve a. The stop at d is utilized in thb particular case to
disengage the driving clutch after the worm-wheel has made a
revolution. If stop d is withdrawn, the spring e revolves the
worm-wheel slightly and moves the worm and clutch b to the
nt. aa. (A utd B) DaWca* for AnIomMicallT DlMii(«ctii( th* Dt1*«ii
Hambar wh«i«*M Ra^staaea to Motion Iticraaaaa BseaMiTalr; (C)
Friction Oaiilng daalgnad to Vary Contact Praatun Accordlnf to Load
left and into engagement with the constantly revolving clutch a.
The worm-wheel then begins to revolve and continues until the
lug g strikes the stop d or until some unusual resistance too great
to be overcome by the spring is encountered; then, as the worm-
wheel remains stationary, it forms a nut for the worm which
screws itself out of engagement with clutch a. The strength of
spring e is proportioned with reference to the safe or nuudmum
load to be transmitted. One of the advantages of this type of
mechanism is that the motion is positively transmitted until an
excesave load causes the driving clutch to be disengaged. Pro-
TRIPPING MECHANISMS 263
vision may readily be made for the adjustment of spring e so
that the tension can be varied according to conditions.
Diagram B^ Fig. 22, illustrates a modification of the same
general type of mechanism. The shaft m is free to move slightly
. in an endwise direction and is keyed to the tapering disk h,
which fits into a seat of corresponding taper in the hub of gear n,
thus forming a friction clutch. Motion is applied to gear n
and is transmitted by worm j to a worm-wheel (not shown) ,
for any desired purpose. Shaft m turns freely in the hub of
gear n, but is attached to worm j. The lever ife, which has a
spring fastened to it above the fulcnmi or pivot, supplies the
necessary amoimt of thrust to keep h in engagement with n \mder
ordinary conditions. This thrust may be regulated by the
thimib-screw / which changes the position of the block to which
the spring is fastened. If the resistance to the motion of the
worm-wheel becomes excessive, the worm moves bodily along the
teeth of the wheel, as though it were a nut, and, by moving
shaft m and disk h to the left, disengages the friction clutch.
The endwise thrust from lever k might be obtained by means of
a weight instead of a spring.
Pressure of Friction Gearing Varied According to Load. — A
novel design of friction gearing, in which the pressure between
the two friction wheels is automatically^regulated by the amount
of power transmitted, is shown at C in Fig. 22. The wheel
w which is the driver revolves in the direction shown by the
arrow. The driven pinion / is free to either rotate or slide in a
lengthwise direction upon shaft r within certain limits. This
shaft has a screw of coarse pitch which passes through nut s.
This nut slides in grooves in the friction pinion / so that the
pinion and nut revolve together. A spiral spring p inserted be-
tween nut s and the pinion forces the latter against the driver w
with a pressure depending upon the position of the nut. If
wheel w is revolving in the direction shown by the arrow and
the driven shaft meets with an unusual degree of resistance to
rotation, as soon as shaft r lags behind or stops revolving, nut
s moves downward, owing to the action of the screw, and in-
creases the compression on spring p, and also the pressure be-
17 A
264 MECHANICAL MOVEMENTS
tween pinion t and wheel w. When the resistance to rotation
again becomes normal, the spring moves the nut slightly upward
and reduces the endwise thrust. While this device may not
be entirely practicable, it embodies an interesting principle.
Automatic Relief Mechanisms for Forging Machines. — Forg-
ing machines are equipped with a tripping or relief mechanism
which prevents excessive straining or breakage of the parts con-
trolling the motion of the movable die, in case the stock to be
forged is not placed in the grooves of the dies, but is caught
between the flat faces. These relieving mechanisms differ some-
what in design, but the object in each case is to temporarily and
automatically release the movable die from the action of the
driving mechanism, in case the operating parts are subjected to a
strain or pressure that is abnormally high. The release may be
obtained by inserting bolts or '' breaker castings" in the mech-
anism, which will shear off or break if there is an excessive strain;
another t3rpe of relief mechanism depends for its action upon a
spring which is proportioned to resist compression for all ordinary
strains but to compress sufficiently to release the pressure on the
dies when that pressure increases beyond a safe maximimi. Two
forms of spring-controlled relief mechanisms will be described.
Spring and Toggle Relief Mechanism. — The plan view of a
forging machine, shown in Fig. 23, illustrates one method of
arranging a spring and toggle relief mechanism. When this ma-
chine is in operation, the stock is gripped between the stationary
die A and the movable die B. The heading slide C, which carries
a ram or plimger for performing the forging operation, is actuated
by a crank on the crankshaft D. The gripping slide E to which
die B is attached is moved inward for gripping the stock and out-
ward for releasing it, by means of two cams F and G. These
cams transmit motion to slide F, which is connected with slide E
through a toggle and link mechanism. Cam P, acting upon roll T,
moves the slide E for gripping the stock, whereas camG, in engage-
ment with roll F, withdraws the die after the forging operation is
completed. The upper detail view to the right shows the relief
mechanism in its normal position, and the lower view shows it
after being tripped to relieve any abnormal pressure on the dies.
TRIPPING MECHANISMS 265
When the machine is operating normally, link 7, which con-
nects with link K of the main gripping toggle, oscillates link K
about pivot L and, through link M, imparts a reciprocating
motion to the gripping slide E. If a piece of stock or some other
part is caught between the flat die faces, the gripping action con-
ng. 13-
tinues until the strain exceeds a certain amount; then the
backward thrust upon link N causes it to swing about pivot O
(see lower detailed view) carrying with it the other links of the
" by-pass toggle " and compressing the spring 5 which is shown
in the plan view at the left. As the result of this change in the
266
MECHANICAL MOVEMENTS
position of the by-pass toggle, pressure on the gripping die is
released. Meanwhile the heading tool attached to slide C com*
pletes its full stroke and, upon the return stroke, the by-pass
toggle is re-set automatically by spring S which expands and,
through rod R, swings the toggle links back to their normal
position shown in the upper detailed view. This automatic
re-setting of the toggle makes it unnecessary to stop the machine,
as is necessary with safety devices of the breaking-bolt type.
B
Fig. 34. Bevel Sprins Pltmger Type of Relief Meduuisni on Bolt
and Rivet Header
There is no movement of the by-pass toggle, except when a
" sticker " — to use the shop expression — is caught between the
gripping dies. While this relief mechanism safeguards the work-
ing parts from excessive strains, it is capable of transmitting
enormous pressures to the gripping dies.
Beveled Spring-plunger Relief Mechanism. — A type of re-
lief mechanism which differs from the design described in the
foregoing is illustrated in Fig. 24. This relieving device is ap-
TRIPPING MECHANISMS 267
plied to a wedge-grip bolt and rivet header. The movable die
d is attached to a slide c which is beveled to correspond with the
tapering end of slide b. Slide b is given # reciprocating movement
by the toggle mechanism at e, and, when slide c is pushed in-
ward for closing the dies, the beveled end of slide b forms a
solid metal backing, which securely locks the movable die dming
the heading operation. When forming the heads on bolts or
rivets, it is necessary to place the stock directly in the impression
in the gripping dies, and not between their opposing faces,
as these dies are intended to come together, so that the stock is
firmly held in the impression between them while the rivet or
bolt head is formed by the tool attached to slide g. The relief
mechanism, which comes into action in case the stock is caught
between the dies, consists of a spring plunger a, which has a
beveled end and is held outward by Uie spring shown. The
beveled end of this plimger bears against an angular projection
on a slide for transmitting motion, through the toggle mechanism,
to slide b and the movable die. If this die, however, is prevented
from moving inward by a piece of stock that is not in the die
impression, but caught between the faces, the increased pressure
on plunger a forces it back against the tension of the spring and
off of the beveled seat, as indicated by illustration B.
Automatic Speed-limiting Device. — A speed-limiting device
which is governed by the inertia of a weight and the tension of a
spring is shown in Fig. 25. This automatic stop was designed
for application to steam engines but devices operating on the same
general principle could doubtless be applied to other classes of
machinery. This mechanism is primarily a safety device and is
intended to stop the engine and prevent damage such as might
be caused by a bursting flywheel, in case the governor failed to
operate. The lever A is pivoted at B to the engine cross-head
and is normally prevented from swinging about pivot B by the
spring C attached near the upper end. The inertia of weight Z7,
which may be adjusted along the lever i4, tends to swing the lever
to the right when the motion is suddenly reversed and the cross-
head moves to the left. When the cross-head is at one end of
its stroke, the upper end of lever A is quite close to the catch
2b8 MECHANICAL MOVEMENTS
E, which engages latch F. Rod G attached to this Latch con-
nects through whatever additional rods or levers may be needed,
frith the tripping mecbawsm used in conjunction with a quick-
dodng valve which controb the flow of steam to the engine cylin-
der. This valve and its operating mechanism is shown in detEul
at the left of the illustration. Rod G is connected in any con-
venient way with bellcrank lever B, from which rod / carrying
weights at its lower end is suspended. This rod passes through
tiip-lever K, which normally engages lever L connected with the
llf. »$. AalomaUc Sp««d-ltiiijtiiif MechanUm (m StMin EnflaM
quick-doMng valve M. U, for any reason, the speed of the en-
gine becomes excessive, the lever A and its attached weight
resists tbe sudden reversal of motion at the end of its stroke suffi-
ciently to overcome the tension of spring C, and lever A strikes
catch E, thus releasing latch F; as rod / drops, the Sange on it
strikes trip K and allows the steam valve to be dosed by the
weighted lever N, This speed-limiting device may be adjusted
by varying the tension of sprii^ C and also by chang'ng the
poution of weight D. The greater the spring tension and the
nearer the weight is to the pivot B, the faster the speed will
have to be to overcome the tension of the ^ling at the point of
TRIPPING MECHANISMS 269
reversal. The handle O is (or re-setting the steam valve and
handle Q, for tripping the valve by hand. If remote control is
required, this may be obtained by the use of rods or cables
directly connected to latch K, or by the use of a solenoid R, as
indicated by the illustration. This automatic safety stop is
recommended as being ^mple, positive in action, adjustable,
inexpensive, and easily f^[^ed to almost any engine.
Centrifugal Type of Safe^ Stop. — The aittomatic speed-
limiting device described in the following was designed for ap-
plication to gas or gasoline engines. In case the speed becomes
excessive, owing to the failure of the governor, this tripping
mechanism, which is of the centrifugal type, operates by
breaking the ignition drcuit. It may be attached either
to the secondary shaft or to the main shaft. The controlling
element is a weight A (Fig. 26] which is attached to a rod con-
necting with a ^ring B on the opposite side of the hub. This
weight is located within a casing C carried by a stud D screwed
into the end of the shaft. Pivoted near the casing is a latch E
which normally holds the weighted trip-lever F in- the position
shown. The ignition smtch is located at G and, when the lever
F is held up by latch E, the ignition circuit is closed. If the
270 BiECHANICAL MOVEMENTS
speed of the engine is increased to such an extent that the action
of centrifugal force causes weight A to fly outward against the
tension of spring B, the end of rod H, by striking catch E, releases
lever F and allows it to fall, thus breaking the ignition circuit.
Electromagnetic Tripping Devices. — In designing automatic
machinery or automatic devices for standard machines, the de-
signer is often confronted by the problem of providing a suitable
mechanism for making a machine '' fool-proof " and reliable.
This is particularly true in the case of automatic machines
where one operator looks after several units. While it is not
claimed that purely mechanical means cannot accomplish the
same results which are secured through the use of electro-
magnetic tripping devices, the mechanisms would, in some cases,
be so complicated, as compared to electrical devices for the same
purpose, that they would be a source of trouble, if not impractical.
Another advantage of the electrical devices lies in the fact that
they may be used as a check on the accuracy of preceding oper-
ations and thus avoid finishing pieces of work that are defective.
The application of electricity to automatic machines may be
regarded as a complication in itself, but this is far from being the
case if these tripping devices are properly applied.
The following examples are typical applications of electro-
magnetic tripping devices to automatic machines, and by study-
ing these designs, one may readily understand how similar
tripping mechanisms could be applied to other classes of ma-
chinery. In most of these examples, the tripping devices con-
stitute part of attachments for standard machines that were
converted into '' automatics," thus dispensing with the necessity
of an operator for each machine.
Methods of Closing Electromagnetic Circtdt. — A metallic
cartridge shell is shown in Fig. 27 (view to right) in place on a
machine which pierces the primer hole, and a shell is illustrated
at H on which the piercing operation has been performed. After
the hole has been pierced, the primer is inserted in the primer
cavity /. These operations are performed on a standard Water-
bury-Farrel cartridge primer. The shells were formerly placed
on dial pins by hand and indexed under the cross-head for piercing
TRIPPING MECHANISMS 371
and inserting the primer; ttiey were then removed from the dial
pins automaticaUy. An improvement was made in the method
of (^ration by applying an automatic feed mechanian to place
the shells on the dial pins, but this did not dispense with the
necessity of an operator for each machine, as there are three
possible conditions that may result in the production of imperfect
work: i. The feed mechanism might fail to deliver the shell to
the dial pin, or the supply of shells might become exhausted,
while primers would continue to feed and thus be wasted.
3. The piercing punch might break and the machine would
then continue to place primers in the cavities of shells which
had not been pierced, and such shells would obviously be use-
less. 3. The primer feed might fail to work properly, or the
supply of primers might become exhausted.
The application of a suitable electromagnetic tripping mech-
anism to this machine takes care of all of these contingencies.
First, condder the possibility of the feed mechanism failing to
deliver a shell to the dial pin. Referring to diagram A, Fig. 38,
it will be seen that the shells are carried on>pins on the dial and
are indexed under the punch a. If a shell is in its place on the
dial pin, it contracts the spring b when the ram descends, but
373 UECHANICAL MOVEMENTS
should the mechanism fail to deliver a shell to the pin, the sleeve
g passes down over the dial pin and pushes the upper contact d
of the tripping mechanism down upon the lower contact e. This
closes the electrical circuit and stops the cross-head on the up-
stroke. The contacts are fastened to the frame of the machine
and the method by which the tripping mechanism operates will
be described in detail later.
The way in which the piercing operation is safeguarded by the
electromagnetic tripping mechanism is illustrated in Fig. 27.
Tlie punch-holder A is located at the index point immediately
after the completion of the piercing operation. If a shell is
rig-sS. (A) Ofcolt-GlotbiiDeTlcawblchtctawlieiiSIiallliMiiatbMnpluad
OA Dial pin; (B) Trip which piaTentt psMdac a Shall wlfiunt a Prlmar
[uerced, the pin B descends through the hole in the shell, as
shown at the left of the illustration; but if the piercing operation
does not take place, the punch is held in the portion indicated
in the right-hand illustration, thus contracting the light spring
C and throwing the lever D against the contact E. This closes
the electrical circuit and causes the machine to be stopped so that
shells cannot have primers inserted in them when the primer hole
has not been properly pierced.
The fiulure of the machine to feed a primer into the primer
cavity of the shell is guarded against by the mechanism illus-
trated at £ in Fig. sS. The de^gn of this trifling mechanism
TRIPPING MECHANISMS 273
is practically the same as that used to control the pierdng oper-
atioQ, and will be readily understood without further description.
Fig. 29 illustrates the mechanism used on a. press for assembling
the brass cups A and B, the cup A being inserted in the cup B.
These cups are held in hoppers on each side of the machine from
which they are taken by notched dials. The cups A are dropped
into holes in the machine dial which passes over the dial carrying
the cups B. The operation of the machine will not be described;
it should be mentioned, however, that a plunger descends in such
a manner that the cup A is forced into place in cup B. Several
conditions may occur that will result in loss or damage. The feed
mechanism could fail to deliver either one or both cups to their
respective dials, or it could deliver them to the dials in an in-
274
MECHANICAL MOVEMENTS
verted position. Either the absence or inversion of either or
both cups is detected by an electromagnetic tripping device
which automatically stops the machine until the error has been
corrected. The punch C is located at an index point preceding
the assembling pimch, and is carried by a bracket which is
fastened to the cross-head. In the case of an inverted cup, the
punch C is held on the bottom of the cup and pulls the rod G
down through the action of the pinion, which engages with rack
FLVWHECL
rLCCTROMAONinO-
OOMTWHXIfl
Flf. 30. Bl«etromftgiietic ControDer applied to Power Prees for
Operatiag Otttch
teeth cut in the rods C and G. The descent of the rod G causes
the contact closer P to pull down the upper electrical contact
until it closes the circuit and causes the machine to be stopped.
The detail view at the right shows the punch and die when
the feed mechanism has failed to deliver a cup to the dial plate.
In this case, the upper electrical contact is pulled down by the
contact closer H and causes the machine to be stopped as pre-
viously described.
Electromagnetic Controller. — Fig. 30 shows the electromag-
netic tripping device used on the machines referred to in the
TRIPPING MECHANISMS 275
foregoing, for stopping the machine. In this illustration, the
tripping device is shown in place on a power press equipped with
a Horton dutch. The arrangement of the tripping mechanism
will be more readily understood by referring to Fig. 31, which
shows an end and cross-sectional view. This tripping mecha-
nism is self-contained and can be applied to any style of press or
type of machine. The bracket A caities the magnet B, pole-
piece C, and levers D and E. The brass pole G is woimd with
No. 14 double-covered wire and the connecting wires extend
through the back of the spool. The brass pins H help to support
the pole-piece C and provide adjustment for different widths of
air gap, which should be as small as possible.
In order to start the press, the lever E is pulled down. This
engages the flywheel clutch (see Fig. 30) and allows the spring
/ to pull the lever D over the hardened knife-edge, thus setting
the pole-piece C at the proper working distance from the magnet.
The inside dimensions of the device are given in Fig. 31. When
the magnet is energized by two dry cells, it gives an initial pull
of from twelve to fifteen pounds. As the dry cells are used on
open-circuit — except for the fractional part of a second during
which the contacts meet — they have a long life.
The initial pull provided by an electromagnet of this kind
varies with the material used for the magnet and the pole-piece.
Where cast iron is used, the pxill of the magnet can be calculated
by the formula:
Ni = 3000 zVpT^,
in which
N = number of coils of wire on the spool (ampere-
turns) ;
/ = current in amperes;
P = pull in pounds;
Z — air gap in inches;
D - diameter of plunger in inches.
The electromagnet shown in Fig. 31 was designed to give a
pull of 15 pounds, and it will be seen that Z = ^^ inch and D »
1. 1 25 inch. Then:
NI = 3000 X ^j V15 -^ 1. 125 = 3423.19 ampere-turns.
376 MECHANICAL MOVEMENTS
Assuming that there axe 375 turns of wire on a spool, the
amount of current required will be found to be " - "' -^ — 0.14
. 375
or, say, 10 amperes. Two good dry cells connected in series
will average 15 amperes during their useful life and give a con-
siderably hi^er current when new. As 10 amperes is sufiBcient
to enable the electromagnet to do the work required of it, it will
be seen that an ample factor of safety is provided. When
designing devices of this kind, moving wires and moving contacts
should be avoided and the mechanism should be made as simple
as possible. The dry cells should be used on open drcuit, the
Flf. ji. End «n4 Cr«M-«MtlanaI ^eva ol ElsctTooufiielic Cootrolln
contacts carefiilly insulated from the machine, and covers pro-
vided for contacts and terminals.
Controlling De^ce for a Delicate Mechanism. — The delicate
and intricate mechanism of an adding machine is safeguarded
from injury resulting from careless or rough operation, by the
ingenious mechanism shown in Fig. 32. This controlling device
js so arranged that the force or power exerted upon a hand lever
by the operator is not transmitted directly to the mechanism,
but the operation of the machine is subject to spring action at a
certain known rate and with a known driving force. The oper-
ator is only allowed to supply the power for stretching n-rtflin
TRIPPING MECHANISMS
277
springs and releasing their action, the arrangement being such
that he cannot apply his strength directly to the mechanism.
The inner end of the operating lever is shown at F. The
upper view marked " position No. i " shows the lever after it has
POSITION N(k2
POSITION NaS
Fig. 33. Spring Controlling Device which Safegoerds the DdicAte
Mechanism of an Adding Machine
been pulled forward for operating the machine. This lever
revolves freely on its shaft and the operating parts are driven
by the member E. As lever Y is pulled forward, catch C
releases pawl Z, thus allowing member E to fly forward as
278
MECHANICAL MOVEMENTS
springs A contract and transmit motion to E through levers D
and links B. This free movement of part E operates the for-
ward stroke of the machine, and the rate of action is controlled
by an oil by-pass governor (not shown). The movement of E
is stopped by abutment F in position No. 2. The forward move-
ment of operating lever F, which is now free of the mechanism,
is continued by the operator until the lever arrives at position
No. 3. At this point, the end of pawl Z strikes pin H, throw-
ing the pawl back into engagement with the projecting lug on
part E. As the lever moves from position No. 2 to position No.
3, the springs A are extended, and acting through levers D and
links B they return lever Y to the starting position, the lever
Fig. 33. Simple Arrangement for Holding In fhe Downward Poaition
only One Key at a Time in a Row of Adding Machine Keya
carrying with it part E and the mechanism of the machine.
This reverse movement is also under the control of the oil gover-
nor. Near the end of the return movement, latch C rises to
permit pawl Z to pass, and the various parts return to position
No. I ready for another stroke.
The provision of two springs A is simply for balancing the
strain on the mechanism. The double action of these springs,
which makes it possible for them to operate the mechanism on
both the forward and backward strokes, is due to the fact that
they are connected to movable members at each end. In one
case, the connection is to levers D and in the other to operating
lever F. The contraction of these springs between positions
TRIPPING MECHANISMS 279
No. I and No. 2 operates the forward motion, and their contrac-
tion from portion No. 3 to No. 1 operates the backward motion.
Control for Flexible Keyboard. — The keyboard of an adding
machine is said to be " flexible " when so arranged that, if a key
has been depressed, it will stay down, but the pressing down
of another key in the same vertical column will release the first
key. With this arrangement, if an attempt were made to de-
press two keys successively, the releasing of one by the downward
action of the other would eliminate a possible error. As a fur-
ther advantage, if the wrong key were pressed, the depression
of the right one restores the wrong one to its normal position.
The simple, but ingenious, device for controlling the action of
the keys on one of the commercial adding machines is illustrated
in Fig- 33. If key No. i is depressed, the lower hooked end of
the stem on which it is mounted springs past the end of a long
pivoted strip A that extends throughout the entire length of
the vertical row of keys. The result is that the key is held in
the downward portion by this hooked end until some other key
is depressed. For instance, if the operator presses down on key
No. 2, this will swing the strip A about its pivot to allow the
28o MECHANICAL MOVEMENTS
hooked end of the stem to pass, and this movement of strip A
releases the hooked end of key No. i which immediately is forced
upward to its normal position by a spring B, In the same
manner, any key which may be pressed down will throw back
the strip and release any other key which may at the time be
depressed.
Full-stroke Mechanisms. — Mechanisms are sometimes so
arranged that hand-operated movements are, to some extent,
controlled mechanically, to prevent motion in the wrong direc-
tion or incomplete action. The full-stroke ratchet mechanism
shown in Fig. 34 is used on the Ellis adding typewriter to prevent
the operator from starting handle A and not completing the
required movement. For instance, if handle i4 is in the upper
position, as shown at the left, any downward movement must be
continued until the handle has made a complete stroke before
it can be reversed for returning it to the original or upper position.
Similarly, if the lever is at the lower end of its stroke, as shown
by the view to the right, any upward movement must be com-
pleted before the direction of motion can be reversed. This
positive control of the action of handle A is obtained in a very
simple manner. As the handle is moved downward or upward,
pawl B is carried with it. This pawl is pivoted to part D and
normally held in a vertical position by a spring. When handle
A is at the upper end of its stroke, as shown at the left, and a
downward movement is started, pawl B engages sector C and
its upper end swings to the right; as the downward movement of
handle A continues, pawl B engages successive notches in sector
C, and locks into one of these notches if an attempt is made
to return handle A before the downward stroke is completed.
When handle A has been pushed all the way down (as shown to
the right), pawl B drops into the enlarged notch E of sector C
where there is enough room to permit the pawl to swing around to
the vertical position; consequently, as soon as handle A is moved
upward, the top of pawl B swings to the left and again engages
successive notches in sector C, thus preventing any return of
handle A to the lower position until the pawl has cleared the
upper end of the sector and again swings to a vertical position.
CHAPTER X
AUTOMATIC FEEDING MECHANISMS
Machines which operate on large numbers of duplicate parts
which are separate or in the form of individual pieces are often
equipped with a mechanism for automatically transferring the
parts from a magazine or other retaining device, to the tools
that perform the necessary operations. The magazine used in
conjunction with mechanisms of this kind is arranged for holding
enough parts to supply the machine for a certain period, and it
is equipped with a mechanical device for removing the parts
separately froin the magazine and placing them in the correct
position wherever the operations are to be performed. The
magazine may be in the form of a hopper, or the supply of parts
to be operated upon by the machine may be held in some other
way. The transfer of the parts from the hopper or main source
of supply to the operating tools may be through a chute or pas-
sageway leading directly to the tools, or it may be necessary to
convey the parts to the tools by an auxiliary transferring mech-
anism which acts in unison .with the magazine feeding attach-
ment. These automatic feeding mechanisms are usually de-
signed especially for handling a certain product, although some
types are capable of application to a limited range of work.
The feeding mechanisms described in the following include de-
signs which differ considerably, and illustrate, in a general way,
the possibilities of automatic devices of this kind.
Attachments having Inclined Chutes. — One of the important
applications of magazine feeding attachments is in connection
with the automatic screw machine. Most of the parts made
on these mach'nes are produced directly from bars of stock,
but secondary operations on separate pieces are sometimes
necessary, and then an automatic or semi-automatic attachment
may be employed to transfer the parts successively to the ma-
281
282 MECHANICAL MOVEMENTS
chine chuck where the tools can operate upon them. Many of
these attachments have magazines which are in the form of an
inclined chute that holds the parts in the correct position and
from which they are removed, one at a time, by a transferring
device. An example of this type of magazine attachment is
shown in Fig. i. This attachment was designed for feeding
the handles of safety razors on a Brown & Sharpe automatic
screw machine. The preli^iinary screw machine operations
involve turmng, forming, knurling, drilling, tapping, and cutting
off the handle, thus producing a piece of the form shown at
A in the illustration. These partly finished handles are then
placed in the chute or slide of the feeding attachment, from which
they are transferred to the chuck, so that a hole can be drilled
dear through the handle as indicated at JS, and one end of the
hole be slightly enlarged. The upper and lower plates C of
the chute have grooves milled in them to correspond to the en-
larged parts of the handle. As each successive haAdle reaches
the lower end of the chute and drops into the small pocket shown,
a spring plunger L attached to the turret advances and pushes
the work out into the chuck of the machine.
As the ends of the handles have shoulders, the pocket at the
bottom is automatically enlarged to permit the passage of this
shoulder. The work-carrier consists prindpaUy of two blocks
D and E and a finger F. Block D is held in the cross-slide and
block E is attached to the top of block D. The forward end of
blodc E is cut out to fit the work, which is held in place by finger
F. This finger is fastened to lever G, pivoted on block Z), and
normally held in position by a pawl B. engaged by plunger /
and pin /. When a piece of work drops into the pocket in
block E and the front cross-slide has advanced far enough to
bring the work in line with the hole in the chuck, the enlarged
part of the pltmger L trips the finger F after the work has been
partly inserted in the chuck. This action is caused by the con-
tact of plunger L with a beveled edge on pawl E which disen-
gages the V-shaped end of the pawl from a groove in lever G
and, at the same time, pushes back spring plunger 7, thus allow-
ing finger F to drop away from block E. The pawl E serves as
AUTOMATIC FEEDING MECHANISMS 283
a locater for the work and, when disconnected from lever G,
it swings down and the work is pushed into the chuck by plunger
L which is held in the advandng turret. After a piece has been
inserted in the chuck, the cross-^de, as it moves outward, brings
FlC- I. Aotonstic Screw Hacbine iiattiiat AtUclunmt
trip K against casting M which, through the combined action of
lever G, pawl B, and spring plunger /, closes the work-carrier.
The piece in the chuck is forced in against a spring plunger
held by feed finger N. This spring plunger ejects the work
when the machining (q>eration has been fini^ed and .the chuck
is opened.
384 MECHANICAL MOVEMENTS
Feeding Atttchment for Pinion Stalls. — Another magMine
feeding attachment having an inclined chute is shown in Ftg. 2.
This attachment was deseed for handling pinion staffs of the
Haf uin* AtUchment (of Flnlon fiufli
form illustrated by the dotted lines in the upper right-hand
comer of the illustration. The chute C is supported by a bracket
B which is attached to a. boss provided on Brown & Shaipe
AUTOMATIC FEEDING MECHANISMS 285
automatic screw machines for holding special attachments. The
bracket A is attached to B and carries the mechanism for feeding
the pinion staffs successively to the place where they can be re-
moved by the transferring arm. The two main parts of the
chute are grooved to fit the pinion staffs, so that the latter are
held in the correct position. The operation of this attachment is
as follows: The chute is filled with pinion staffs and the lower one
is held back temporarily by trip P. This trip is connected to
link G, which carries a pin that engages a slot cut in lever H
(see detailed view). Lever H has fastened to its upper side a
trip-lever plate / the inclination of which may be varied. When
the transferring arm swings upward, it is stopped in the correct
position by set-screw /, which engages stop Ky the arm itself
bearing against plate / and forcing it back, together with lever
H. This action, through connecting link G, operates trip F
and aUows one piece to drop into the pocket formed at the end
of this trip. The transferring arm carrying a split bushing D
then advances and pushing back the nest L passes over the end
of a pinion staff and grips it. The transferring arm then re-
cedes and swings down to the chuck in which the pinion staff
is placed. When the transferring arm descends, the spring N
returns trip-lever plate / and lever H to their former position.
Trip-lever P also swings back in order to catch another piece,
the pinion staff in the trip being deposited in the nest L ready
for transferring to the split bushing D the next time the trans-
ferring arm ascends.
Magazine Attachment for Narrow Bushings. — The narrow
bushings shown at i4. Fig. 3, are blanked out and drawn in a die
to the shape shown; they are then turned, faced, and threaded
(as indicated at £) in a Brown & Sharpe automatic screw ma-
chine. Two separate operations are required, but the magazine
attachment shown in. this illustration is used for both. The
bushings are placed in the inclined slide or chute, and the lower
one is retained temporarily by a finger t, which is held upward by
spring ky the exact position of the finger depending upon the
adjustments of set-screw j which engages a projecting end. The
transferring arm, which removes the work from the lower end of
286
MECHANICAL MOVEMENTS
the chute and conveys it to the chuck, has a swinging or circular
movement, as indicated by the dotted line. The work is gripped
as the holder (shown in detail at C) advances, and then, as the
transfer arm starts to swing downward toward the chuck, the
finger i is depressed, thus allowing the bushing to slide out of
the chute. The work-holder has a taper shank b which fits into
the main body c. On this body is held a ring d through which a
pin is driven. The pin h in this ring d fits into an elongated hole
in body c and enters spring plimger e. A slot in body c receives a
flat spring g, which is provided to grip the work securely. This
spring also compensates for slight variations of diacmeter.
PATH or
TRAN8FERRINC
BU8HINQ TO
RK-CHUCK
Fig. 3. Magazine Attachment for Handling Parta ahown at A and B
The degree of inclination for chutes of magazine attachments
varies from 20 to 60 degrees and depends upon the size and shape
of the work. The chute should incline at a greater angle for
small work than for large work. The chutes of attachments used
for handling flat pieces, such, for example, as might be cut out
in a blanking die, are usuaUy held in a vertical chute instead of
one that is inclined.
Revolving Magazine Attachment — The automatic feeding at-
tachment shown in Fig. 4 differs from the types previously de-
scribed in that the blanks to be operated on are held in a revolving
carrier or magazine 5. This attachment is used for feeding the
AUTOMATIC FEEDING MECHAIJISMS 287
blanks from which the barrels for watdi springs are made.
The shape of these barrels, which are about { inch in diameter,
is indicated at M. The magazine wheel B is recessed, as shown
by the side view, to form a pocket for the blanks, and it is provided
with slots around the ec^e in which the blanks fit, as indicated
at N. The blanks are inserted in the attachment or magazine
wheel through slot C which connects with pocket D. The wheel
B is rotated by a belt which transmits motion from a pulley on
the front cam^aft to a pulley located on shaft 5. As these two
pulleys are of the same diameter, the magazine wheel rotates at
ng. 4. lI*(azlnB Attadunent of Bandvliic Tnt
the same ^>eed as the front camshaft. The blanks, as they are
carried around by the wheel, drop into slide E and from there
into a pocket in a bushing held by a carrier. The block / of
this carrier (see enlarged detail view) is counterbored to recdve
a bushing which contains plunger P, and the bushing is cut
out to receive the spring fingers E. These fingers are attadied
to plugs F which are held in drilled holes in block /. The bush-
ing O is free to slide in block / and is held back by spring G, which
bears against a pin driven into the bushing. As a blank rolls
down the slide H, it is deposited in bushing O. The cross-slide
upon which the attachment is mounted then advances to locate
388 MECHANICAL MOVEMENTS
the blank in line mth the hole in the chuck. When in this
position, the turret advances and a stop on it pushes plunger P
forward, thus forcing the blank from the fingers E and depositing
it in the chuck. The spring Q which returns plunger P is made
much heavier than the spring G used for holding back the bush-
ing O. The object of this arrangement is to insure that the
'bushing will be pushed out dose to the face of the chuck before
the plunger forces the blank out of the spring fingers.
Hopper Feeding Mechanism for Screw Blanks. — The auto-
matic feeding mechanism to be described is used on a thread
rolling machine of the type having straight dies between which
the blanks are rolled to form the threads. The faces of the dies
are in a vertical position and one die is given a reciprocating mo-
tion in a direction at right angles to the axis of the screw blank.
The automatic feeding mechanism shown in Fig. 5 is arranged to
transfer the screw blanks from the hopper A to the dies at £ in
such a way that each successive blank is in a vertical position
when caught between the dies. The hopper A^ which is at the
top of the machine, is equipped with a plate or center-board C
which passes through a slot in the bottom of the hopper and is
given a reciprocating motion by a gear-driven cam. This center-
board has a vertical slot extending along the upper edge (see
detail sectional view) which is a little wider than the diameter of
the screw blank bodies. As the center-board moves up through
the mass of screw blanks, one or more of these blanks are liable
to drop into the slot and hang suspended by their heads. If a
blank does not happen to be caught fot any one stroke of the
center-board, the mass of blanks is disturbed and it is likely that
one or more blanks will fall into the slot on the next successive
stroke of the center-board.
As some blanks are picked up while in a crosswise or other
incorrect position, an auxiliary device is employed to dislodge
such blanks. This device consists of three revolving wheels at
D which have teeth like ratchet wheels. The arrangement of
these wheels is shown by the detailed view. The center wheel,
which is the smallest, revolves above the heads of the blanks
which are moving down the slot of the center-board in the proper
AUTOMATIC FEEDING MECHANISMS
289
position, as indicated at E. The two outer wheels, which are
larger than the central one, revolve dose to the outer edges of
the center-board. If a blank is not in the correct positioQ, it will
be caught by these wheels and be thrown back into the hopper,
but all blanks that hang in the slot pass between the outer
wheels and beneath the central one without being disturbed.
After the blanks leave the center-board, they pass down the in-
clined chute G, which is provided with a guide F that holds them
Fig. 5. Ho9p«r-f«edliif Mechanism for Screw Blaiiki
.
in position. As each successive blank reaches the lower end of
the chute, it swings around to a vertical position and is caught
between the dies which roll screw threads on the ends.
Feeding Shells with Closed Ends Foremost — The possi-
bilities of mechanical motion and control are almost boimdless,
if there is no limit to the number of parts that may be incor-
porated in a mechanism, but as complication means higher manu-
facturing cost, and usually greater liability of derangement, the
apO MECHANICAL MOVEMENTS
skillful deagner tries to accomplish the desired results by the
simplest means possible; it is this simplifying process that often
requires a high degree of mechanical ingenuity. The feed-chute
shown in Fig. 6 illustrates how a very ^ple device may some-
times be employed to accomplish what might appear at hrst to
be difficult. Tins is an attachment used in conjunction with an
automatic feeding mechanism for drawing shells in a punch-
press. These shells are fed from a hopper, and it is essential to
have them enter the die with the closed ends down. If a shell
descends from the hopper with the open end foremost, it is auto-
matically turned around by the ^mple device shown. The view
to the left illustrates the movements of a shell which comes down
in the prc^r position or with the closed end foremost. In this
case, the bottom of the shell simply strikes pin B and, after
rebounding, dr<^ down through tube C If the open end of a
shell is foremost, as illustrated at the r^t, it catches on pin
B and is turned around as the illustration indicates. If a shell
enters the die with the closed end upward, the drawing punch
will probably be broken.
Feeding Bullets vith Pointed Ends Foremost. — An attach-
ment for feeding lead bullets or slugs to press tools with the
pointed ends foremost, regardless of the position in which the
AUTOMATIC FEEDING MECHANISMS 291
bullets are received from the magazine or hopper, is illustrated
in Fig. 7. This attachment is applied to a press having a 4^^-
inch stroke. The bullets enter the tube A which connects with
a hopper located above the press. An " agitator tube " moves
up and down through the mass of bullets in the hopper and the
bullets which enter the agitator tube drop into tube A. As
each bullet reaches the lower end of this tube, it is transferred by
slide C (operated by cam D attached to the cross-head) to a
position under the rod E. The rod-holder L is also carried by
the cross-head. Whenever a bullet enters tube A with the
rounded or pointed end downward, it is simply pushed through
a hole in dial F and into feed-pipe G leading to the dial feed-plate
of the press. This feed-plate, in turn, conveys the bullets to the
press tools where such operations as swaging or sizing are per-
formed.
The arrangement of dial F is shown by the detailed sectional
views at the lower part of the illustration. Whenever a bullet
enters the dial with the pointed end foremost, the plungers H
are pushed back against the tension of springs J and the bullet
drops into the tube beneath. If the blunt or flat end is foremost,
the plungers are not forced back, and as rod E is prevented from
descending further, it simply moves upward against the tension
of spring K as the cross-head continues its downward motion.
A mechanism is provided for turning dial F one-half revolution,
so that every bullet that is not pushed through the dial will be
turned around with the pointed end foremost before it drops
into the feed-tube G. This rotary motion of the dial is derived
from a rack M attached to bracket L, and a pinion N with which
the rack meshes. The location of the dial is governed by an
index plate and a plunger T which enters one of the notches
in the index plate; the latter is attached to dial F. A dutch
P (see also detailed sectional view) is fastened to sleeve R. Fiber
friction washers S are used to prevent breakage in case anything
unusual should happen.
When the cross-head descends, the rack M revolves the dutch
in the direction shown by the arrow. When within one-quarter
inch of the lower end of the stroke (this position is shown in the
UECHANICAL MOVEMENTS
{Oustration), the rack Jf strikes lever U and disengages the in-
dex plunger T. The rack descends far enough to give it time
on the return stroke to move dial F suffidently to prevent the
returning index plunger from reentering the hole it just occupied.
On the return stroke, the lost motion of the rack in its bracket
provides time for the withdrawal of rod E before dial P is re-
volved. This lost motion can be adjusted so that the hig^iest
point of the upward stroke is reached just as dial F has turned
AUTOMATIC FEEDING MECHANISMS 293
180 degrees, thus bringing the other index slot in line with plunger
r. If the rack should move too high, the friction washers S
will allow for this excess movement by slipping. This half
revolution of dial F tiims a bullet that is not pushed through it
end for end, so that it drops down in the pipe G with the pointed
end foremost. The slide C is returned for receiving another
bullet from tube A by the action of spring W which holds the
slide roller firmly against the cam-plate D.
Feeding Shells Successively and in Any Position. — A feeding
mechanism designed to feed shells or cartridge cases one at a
time and in any position is shown in Fig. 8. Owing to the weight
of the heads of cartridge cases, they may readily be arranged up-
on a table heads downward, and the particular mechanism to be
described is arranged for changing the shells from a vertical to a
horizontal position before dropping them into a trough by means
of which they are conveyed to the operating tools. The table
A upon which the shells are placed is slightly inclined so that
the shells readily slide towards a horizontal disk B which is ro-
tated constantly by a belt and pulley. As the disk revolves, the
shells are carried towards the funnel-shaped mouth of a guide-
way C where there is a wheel D having teeth of irregular form.
This wheel is revolved in the same direction as disk B so that it
continually pushes back some of the shells and prevents jamming.
The shells which move too near the center of disk B to enter
the mouth of the guide-way are carried aroimd imtil they meet
the edge of an inclined fence £, which is just above the disk near
the center, but is arched near the periphery so that shells can
pass under it. This fence causes the shells to move out towards
the drcimiference of disk B, so that they may enter the guide-
way as they again come aroimd.
Just beyond the wheel D there is a feed-wheel P which has
teeth of regular form that fit between the cartridge cases. This
wheel is rotated in the direction shown by the arrow, so as to feed
the shells forward at a definite rate along the guide-way C
This guide-way, excepting at the mouth, is only slightly wider
than the shell diameter, so that all the shells in it form a con-
tinuous and orderly row. The guide-way may be curved gradu-
294
MECHANICAL MOVEMENTS
ally in any direction, so that the shells which enter it with their
axes vertical may be turned to any desired position as they pass
along. As previously mentioned, the guide-way, in this case,
changes from a vertical to a horizontal position. At the end of
the guide-way there is a pair of stops that act alternately to
allow one shell to issue at a time from the guide-way. The first
stop conasts of a pair of fingers G which rise up through the floor
Fig. S. UkIuuiIhii tor AntoiMticillj 7s*dlii( Shdii One ■
of the guide, and the second stop is in the form of a gate E which
moves down in front of the foremost shell of the row. These
two stops are carried on a pivoted frame / so arranged that, as
the gate rises to allow the foremost shell to pass from the mouth
of the tube, the fingers G rise in front of the second shell to hold
badi the whole row. The frame J is connected with a lever K
which is intennittently rocked by the cam L. llie successive
'ii.;
.11
AUTOMATIC FEEDING MECHANISMS 295
shells drop into the trough M as they are discharged from the
guide-way.
Feeding Shells Successively and Gaging the Diameters. —
The mechanism described in the following is part of a cartridge-
'- making machine, and its function is to feed cartridge cases or
'^ shells from a tube, one at a time, and provide means of detecting
>:^ shells having heads that are over the standard diameter. The
shells are placed heads downward onto a fixed table from which
they are pushed by hand onto a revolving disk -4, Fig. 9. This
feed disk operates on the same general principle as the one il-
lustrated in Fig. 8. As each successive shell passes from the
guide-way of the revolving disk, it is placed directly over a
push-rod B. This push-rod is pivoted to the end of a lever
which is oscillated by a cam, thus causing the push-rod to move
vertically through a guide C and through one of the slots D
formed in the periphery of the feed disk A . Each time the push-
rod B moves upward, it pushes a shell into the end of tube E.
This tube has two gravity fingers F and, as the shell rises, its rim
lifts these fingers and separates them far enough to allow the
rim to pass; the fingers then drop back behind the rim and
prevent the shell from falling when the push-rod recedes. When
this push-rod makes the next successive stroke, the shell lifted
by it pushes the first shell up into tube E which is bent over to
form an arch and terminates at Ex.
When the vertical section of tube E is filled and the shells
passed over the top of the arch, they fall open end first down into
the vertical section £1. Just below the end of tube -Ei, there is a
device for releasing the shells one at a time. This consists of a
three-armed lever G, which is pivoted at H and is given an
oscillating or rocking movement by vertical rod / having a
roller in contact with cam K, against which the rod is held by
a spring. As lever G oscillates, it withdraws, alternately, two
fingers L and M which project into the passageway for the
shells. These fingers are withdrawn against the tension of suit-
able springs and the upper one catches the cartridge shells by the
rim, whereas the other one extends beneath the open end. When
the upper finger is withdrawn, a shell drops against the lower
19 A
396 MECHANICAL MOVEMENTS
finger and, vhea the Latter is withdrawn, this shell is released and,
at the same time, the upper finger moves in and prevents the
next successive shell from dropping out until it is released by
the backward motion of finger L. As each successive shell drops,
it paraes through a ga^ N and then falls over one of the vertical
pios 0, which are equally spaced around the periphery of the
machine table. This table is revolved intermittently in order
to locate the shells beneath a series of tools carried by a tool*
holder having a vertical reciprocating motloa.
Attached to the rod J, there is a bar P the movements of
which are steadied by a bar Q mounted in suitable guides The
bar P carries a spring plunger R having a beveled end which
engages a beveled surface as shown; consequently, as rod / and
bar P are lifted by cam K, plunger R is pushed back far enough
to clear the rim of the descending cartridge. Whea rod /
AUTOMATIC FEEDING MECHANISMS 297
descends, however, plunger R moves inward and bears downward
on the head of the cartridge beneath it, thus pushing it through
the gage N and onto one of the series of pins 0. If the rim of a
cartridge should be so large that it would not readily pass through
the gage, the resistance overcomes the tension of the spring that
holds J into contact with the cam, and the cartridge remains in
the gage until the next stroke of the machine. As the table
moves around, the attendant will notice that there is a pin with-
out a shell upon it and, therefore, he will remove the next suc-
cessive shell, because, ordinarily, the shells are not so large as
to resist being forced through the gage by a second stroke of the
push-down bar P. If an exceptionally large head will not pass
through the gage, the machine must be stopped and the shell
removed by hand.
INDEX
Page
Acceleration, meaning of 4
Accumulator mechanism of adding machine 175
Adding machine, device for protecting delicate mechanism 276
full-stroke mechanism 280
key controlling device 279
Adding mechanism, general principle of operation 172
Aeroplane motor, of revolving cylinder type 65
with revolving cylinders and eccentric track 66
Air q>rings or cushions of printing press bed 79
American or continuous system of rope transmission 29
Anchor or recoil escapement for clockwork 142
Angular velocity 5
Automatic dutches for power presses 242
Automatic control of reversing mechanism 112
Automatic relief mechanisms of forging machines 264
Automatic screw machine feeding attachments 281
Automatic speed-limiting devices for engines 267
Automatic variation in points of reversal 115
Automobile differential gearing 220
Backgearing, methods of arranging 44
Bands, flexible, use of, for transmitting motion 30
Barrel or cylinder cam 189
Bellcrank lever 8
Belts, reversing, mechanism for shifting open and crossed 107
use of, for transmitting power 28
use of open and crossed, for reversing motion 100
Bevel gearing 26
Bevel type of friction gearing 24
Bolt and rivet header relief mechanism 266
Brake and magnetic clutch combination 240
Brake, multiple disk combined with clutch 237
Breakable pins to prevent over-load 259
Brown & Sharpe multiple-disk speed-changing mechanism 53
Brown & Sharpe quick-return motion for screw machine 133
Brush wheel of friction gearing 23
Builder motion of a textile machine X15
CamcRL) claw mechanism of moving picture 143
Cam motion, automatic variation of 189
automatic variation of cam rise and drop 192
299
300 CAM — CONNECTING-ROD
Paob
Cam laotioQ, mcdianiam for vaiying dwdl of follower 191
secUonal cams for varying 194
Cams, arranged to vary rotary motioo 196
definitkm of, and general application it
double two-ievdution shifting type 300
face or positive motion 185
ten motion perpendicular to plane of cam 189
general dassification of 184
having rectilinear motion 189
having yoke type of follower 187
in group engaged successively 197
obtaining resultant motion of several 198
plate 185
plate, arranged for positive motion 185
sectional, for varying motion 194
special, for returning follower 187
wiper and involute x88
Center-line of motion 8
Centrifugal and inertia governors 57
Centrifugal type of safety stop for gas engines 369
Chain and sprocket form of transmission 39
Chinese windlass, differential motion of aoa
Claw mechanism of moving picture camera 143
Clutch control, variable by pattern chain 346
Clutches, automatic disengaging of, to prevent over-load 360
automatic power press, engaged by wedging action 344
automatic power press, of the key type 343
controlling motion by 351
friction 333
friction, multiple-disk type 33$
friction, ring or plate type 334
induction type 341
magnetic, with automatic band clutch 340
multiple-disk equipped with automatic brake 337
of reversing mechanisms, methods of operating xoi
pneumatically-operated multiple disk 336
that automatically disengage 343
trip for automatically disengaging 349
types of positive or toothed 331
type which expands radially 334
Qutch method of controlling q)eeds 46
Compound gearing 3t
Compound train of epicyclic gearing 37
Concave friction disks and inclined intermediate wheel 55
Cone-pulley and epicyclic gear combination 44
Cone-pulley and spur gear combination 43
Cone-pulley drives, arrangement of 4t
Coonecting-rod and crank combination 60
CONSTRAINED — DRILLING 30I
Paok
CotDStiained motion » a
Continuous motion 1
Continuous or American system of rope transmission 39
Controller, electromagnetic, for tripping mechanism 374
Crank and connecting-rod 60
Crank and epicyclic gear combination 86
Crank and oscillating link. .1 124
Crank and slotted cross-head 63
Crank, application of, for reversing press bed motion 75
Crank mechanism for doubling stroke 68
Crank motion, for automatically varying the stroke 83
Crankpin and cross-head, relative motions of 61
Crankshaft of stationary type and revolving cylinders 65
Crosby strai|^t-line motion for indicator 16
Cross-feeding movement, automatic reduction of 144
Cross-feed mechanism of grinding machine « 13Q
Cross-head, motion relative to crankpin 61
Crown gear and shifting pixdon for changing speeds 4q
Curvilinear translation 3
Cycle of motions 6
Cylinder or barrel cam 189
Dead-beat or Graham escapement for clockwork 143
Dead-center positions of crank 60
Differential back-gear for varying speeds 45
Differential controlling mechanism of steering gear 213, 215
Differential feeding mechanism for revolving spindle 210
Differential gear and cam combination 223
Differential gearing, compound train for varying ^)eeds 38, 206
of automobQes 220
speed regulation through 222
Differential governors for water turbines , 217
Differential hoisting mechanism 227
Differential mechanism of gear-cutting machine 225
Differential motions 203
between screw and nut 208
from gearing 204
Differential or floating levers an
substitute for 216
Differential speed indicator 22Q
Differential speed-reducing mechanism 38, 205
Disengaging mechanisms or clutches 230
Dividing mechanism, automatic 167
Diving key type of speed-changing mechanism 48
Double back-gears for lathes 44
Drawing press tog^e mechanism 72
Drilling macUne tripping mechanisms aso
302 DRIVE — FRICTION
Pmb
Drive, positive 6
Drop-hammer lifting mechanism ^ 93
Drop-hanuner tripping mechanism 257
Eccentric 62
Eccentricity of an eccentric 63
Electromagnetic controller for tripping mechanism 274
Electromagnetic tripping devices 270
Electro-mechanical tripping device for textile machine 256
Elliptical gear and eccentric pinion for quick-return motion 130
Elliptical gearing, arranged for quick-return motion 128
use of, for modifying crank motion 70
Engine speed-limiting device 267
English or multiple system of rope transmission 29
^Hcydic gear and crank combination 86
Epicyclic gear and friction disk combination 56
Epicydic gearing, action of, under different conditions 204
combined with cone-pulley 44
compound or reverted train 38, 206
for reversing motion 1 108
use of, for obtaining a rapid reciprocating movement 85
use of, on water turbine governors 2x7
Epicyclic gear trains 33
Escapements for controlling action of clockwork 141
Evan's friction cones for changing speeds 52
Face or positive motion cam 185
Feeding and reversing movements combined xix
Feeding bullets automatically with pointed ends foremost 290
Feeding mechanism, automatic, for handling separate pieces 28X
automatic, for screw blanks 288
with automatic accelerating device 208
Feeding shells automatically with closed ends foremost 289
Feeding shells successively and gaging the diameters 295
Feeding shells successively and in any position 293
Flexible bands, use of, for transmitting motion 30
Floating or differential levers 21X
substitute for 216
Fly frame, automatically varying point of reversal X15
mechanism for varying transverse movement of roving 83
Fly frame differential gearing 322
Force-closed mechanism 6
Forging machine, relief mechanisms 264
Frictional ratchet mechanisms 137
Frictional speed-changing devices 49
Friction clutches 232
multiple-disk type 235
ring or plate type 234
FRICnON — GRINDING 303
%. Paob
Frictkn dutches, type which expands ladially 334
FrictioD disk and epicydic gear combination 56
Friction gearing, double-cone and intermediate ring or bdt type 53
double-cone and intermediate wheel ty^ 51
factors affecting power transmitted by 35
having concave disks and inclined intermediate wheel 55
multiple-disk type for changing speeds 53
pressure varied according to load 363
transmission by 33
use of, for reversing motion zoo
Full-fitioke mechanism of adding machine 380
Gear and cone-puUey combinations 43
Gear and rack combination 67
Gear-cone and tumbler-gear mechanism 48
Gear-cones and sliding key for changing speeds 48
Gear-cutting machine, differential mechanism of 335
Geared speed-changing mechanisms 46
Gearing, compound 33
differential, of automobiles 330
elliptical, arranged for quick-return motion 138
epicyclic, action of, under different conditions 304
epicyclic, for obtaining rapid redprocating motion 85
epiqrdic, for reversing motion 108
for high-speed intermittent motion 148, 150
friction, factors affecting power transmitted by 35
friction, pressure varied according to load 363
intermittent 146
mangle or the Napier motion 8z
ratchet type Z34
toothed, various classes of 36
train of, for transmitting motion 3ii 53
transmission by friction 33
transmission by toothed 36
worm, trip for automatically disengaging 349
Gears, calculating speeds 33
for uniformly intermittent motion 147
for variable intermittent motion 148
idler, effect on transmission of motion 33
trains of ^>ur 33
Geneva whed for intermittent motion 154
Governors, centrifugal and inertia 57
for water turbines, differential 3x7
Graham dead-beat escapement for clockwork 143
Grasshopper motion 14
Grinding machine, automatic cross-feed mechanisms 139, 144
reversing mechanism zo3
304 HARMONIC — LEVEttS
Paob
HuBKUiic motioD, definition of 64
Hetder, relief mechanism for bolt and rivet « 966
Helical motion 3
Helical or spiral gearing 27
Herringbone gear 27
Hobt« action of differential chain 203
Hoisting mechanism, differential type 237
Hooke's coupling or universal joint ^ 11
Hopper feeding mechanism for screw blanks 288
Humpage*B gear for varying speeds 45
Idler gear, effect of, in epicydic gear train 36
its effect on transmission of motion 32
Impulse face of an escapement pallet 142
Indexing and locking mechanism, combined 171
Indexing mechanism, automatic 167
of screw slotting machine 169
Indexing movement, Geneva wheel for 154
Indicator, pantograph reducing mechanism for 20
straight-line motions for 14
Induction clutch 241
Inertia and centrifugal governors 57
Intermittent bevel gears, locking device for 159
Intermittent gearing 146
designed for uniform rest periods 147
for shafts at right angles 157
rapid acting for moving picture projector 150
with swinging sector 153
Intermittent motion x
automatic disengaging device 163
automatic variation of 164
constant, from variable motion x6i
gearing for high speed 148, 150
gears for variable 148
Geneva wheel for 154
of moving picture projector 150
Intermittent movements 134
automatic reduction of 144
Intermittent rotary motion, two-speed 159
Inverse type of cam x88
Involute and wiper cams x88
Irregular motions 184
Key controlling device of adding machine 279
Lazy tongs or pantograph mechanism so
Levers, application of « 8
bellaank 8
LEVERS — MOTION 305
Paob
Levers, complete stroke before return movement Is possible ^ . . . . ado
floating or differential an
length of arms relative to fulcrum ix
position of, relative to center-lines of motion 10
Lifting mechanism of drop-hammer 93
Lifting toe or wiper cam 188
Link connection between rotating parts 11
Link mechanisms 7
Load^and-fire type of reversing mechanism loi
Load, pressure on friction gearing varied according to 263
prevention of excessive, on driven mechanism 359
Locking and indexing mechanism, combined 171
Locking device for intermittent bevel gearing 159
Loom, two-speed intermittent rotary motion for 159
Machine, factors affecting construction x
Magazine feeding attachments for separate pieces aSx
Magnetic clutch equipped with automatic band brake «. . . « 240
Man^ gearing or the Napier motion 8x
Mechanism, factors affecting construction x
trains of 30
Miehle press bed motion 75
Milling machine feed mechanism with accelerating device 208
Miter gearing 27
Motion, center-line of 8
classes of x
constrained 2
continuous x
curvilinear translation 3
differential ^ 202
for press bed, elliptical gear drive 69
general methods of transmitting 7
helical 3
intermittent i* X34
irregular 184
lever reducing, for taking indicator cards 9
mechanism for automatically varying reciprocating 83
of crankpin relative to cross-head 61
of Miehle flat bed or cylinder presses 75
of press bed reversed by reciprocating pinions 79
of press bed, the N^>icd^ 81
plane 2
quick-return X24
reciprocating x
rectilinear translation 3
spherical 4
straight-line «s
straight-line for steam engine indicators 14
306 MOTION — PRESS
Paob
Motion, stcalght-Une, Peftuoelller 17
stnlght-line, Soott RuaaelL 13
sun-«nd-plaiiet 38
Motor drives, reversing zaa
Motor of revolving cylinder type 65
Moving picture camera claw mechanism 143
Moving picture projector, intermittent motion of 150
Mowing machine, wabble gear for driving cutter-bar 85
Multiple-disk dutches 935
equipped with automatic brake 237
pDeumatically-operated design 936
MulUpI&Klisk type of speed-changing mechanism 53
Multiple or English system of rope transmission 29
Nai^ motion for printing press beds 8z
On^<ycle type of drive for cold header 73
Over-load, prevention of, by automatically disengaging clutch 360
prevention of, by breakable pins 259
Pallet of an escapement 143
Pantograph mechanisms 19
Pattern chain for operating dutches 346
Pawl, multiple type for ratchet gearing 136
of ratchet gearing 134
rectilinear motion from revolving 91
Peauoellier straight-line motion 17
Pendulum, effect of arc of swing on time 141
Period of a cyde of motions 6
Pins, use of breakable to prevent over-load 359
Piston with traversing and rotating movements 95
Pitch drde of ^>ur gearing 36
Plane motion 3
Planer feed or crank disks x6x
Planer reversing mechanism 107
Planetary gearing, action of, under different conditions 304
compound train for varying speeds 38, 306
for reversfaig motion xo8
use of, on water turbine governors 3x7
Planetary gear trains 33
Plate cam X85
arranged for positive motion 185
Pneumatically-operated multiple-disk clutch 236
Positive driving 6
Positive motion or face cam X85
Power moving picture projector, intermittent motion for X50
Power press clutches 34a
Press bed motion, for flat bed or cylinder presses 75
PRESS — RESULTANT 307
Paob
Press bed motion, having elliptical gear drive 69
reversed by reciprocating pinions 79
tbt Napier 8x
Projector, intermittent motion of moving picture 150
Piilley ^)eed8, method of calculating 31
Pump piston with combined rectilinear and rotary movements 95
Punch press dutches 242
Quick-return motions 124
crank and osdllating link 124
derived from elliptical gearing 128
eccentric pinion and elliptical gear type 130
independent crank-operated type 133
modification of Whitworth 127
Whitworth 126
R9ck and gear combination ^ . . . . 67
Rac± and worm drive 74
Rack, double, and shifting gear for reversing motion 75
Racks and pinion arranged for doubling stroke 69
Radian, definition of 5
Rapid starting and stopping clutch and brake mechanism 237
Ratchet gearing 134
arranged for reversal of motion 136
automatic disengagement of 139
double action type 137
methods of varying motion derived from , 137
operated by multiple pawl 136
Ratchet mechanism, for releasing sprockets 138
of frictional type 137
which controls a reversing mechanism Z17
which reverses automatically no
Ratio, velocity $
Reciprocating motion i
mechanism for automatically varying . ^ 83
rapid, from epicydic gearing 85
Reciprocating slide, withdrawing from working position 90
Recoil or anchor esa^)ement for dockwork 142
Rectilinear and rotary motions, conversion of 60
Rectilinear and rotary movements combined 95
RectQinear motion, from epicydic gear and crank combination 86
from revolving pawls 91
mechanism for varying , 92
Rectilinear translation ^ 3
Reducing motion, lever, for taking indicator cards 9
pantograph type 19
Relief mechanisms for forging machines 264
Resultant motion of cams, mechanism for obtaining 198
308 RETURN — SPEED-CHANGING
Paob
Return cam for follower 187
Reversal of motkHi, by reciprocating pinions 79
with ratchet gearing > 117, 136
Reversing and feeding movements combined ixi
Reversing clutches, methods of operating loi
Reversing mechanisms 97
ananged to vary point of reversal automatically X15
automatic control of 1x2
automatic ratchet type no
load-and-fire type xoi
of epicyclic or planetary gear type zo8
of grinding machine 102
of two-speed bevel gear type 99
special methods of controlling point of reversal Z05
which reverses after given number of revolutions 117
Reversing motion, by bevel gear and clutch combination 98
by double rack and shifting gear 75
by means of friction disks 100
by means of open and crossed belts 100
by means of spur gears 97
Reversing motor drives 12a
Reversing screw, applications of 74
Reverted or compound train of epicyclic gearing 37
Revolution counter for controlling point of reversal 117
Rotary and rectflinear motions, conversion of 60
Rotary and rectilinear movements combined 95
Rotary motion varied by means of cam * 196
Safety device, brealcable-pin type to prevent over-load 359
for limiting speed of engines 267
for protecting a delicate mechanism 276
which disengages clutch to prevent over-load 360
Safety relief mechanism of forging machines 264
Scotch yoke or slotted cross-bead and crank 63
Scott Russell straight-line motion ^ 13
Screw, applications of reversing 74
having differential motion relative to nut 208, 213
use of, for transmitting motion , f 22
Sellers worm and rack drive. 74
Shaper, driving mechanism for crank 124
Skew bevel gearing 27
Sliding key type of speed-changing mechanism 48
Slotted croaa-hcad and crank 63
Speed-changing and oontroUing mechanisms 39
Speed-changing mechanisms, all-geared 46
f rictional 49
multiple-disk type 53
tjrpes of mechanical 41
SPEED — TEXTILE 309
Paob
Speed indicator, sensitive differential type 329
Speed-limiting device, automatic 967
Speed-reducing mechanism, compound epicyclic gear type 38, 206
differential or epicyclic 205
for high velocity ratios 38, 56
Speed regulation through differential gearing 222
Speeds, calculating for Humpage's gear 45
changing by gear cone and tumbler gear mechar\}sm 48
changing by gear cones and sliding key 48
control of, by means of dutches 46
of epicydic gear trains, method of determining 33
of gears, calculating 33
of pulleys, methods of calculating 31
Speed variation, by means of epicyclic gearing 206
in machines, reasons for 39 ,
Spherical motion 4
Spiral or helical gearing 27
Spring and toggle relief mechanism of forging machine 264
Sprocket and chain transmission 29
Sprocket releasing mechanism of ratchet type 138
Spur gear and cone-pulley combinations 43
Spur gearing 26
Spur gears, trains of 32
Starting and stopping rapidly, dutch mechanism for 237
Stationary crank and revolving cylinders 65
Steering gear, differential controlling mechanism 2i3t 215
Stop mechanism, automatic, for engines ^ . . . 267
electromagnetic 270
Stop motions for teitile machines 254
Stopping and starting rapidly, dutch mechanism for 237
Stops or tripping mechanisms 248
Straight-line motions 12
for indicators 14
t^eaucdlier 17
Scott Russell 13
Stress, prevention of excessive, on driven mechanism 359
Stroke, crank mechanism for doubling. 68
doubling by means of double rack and pim'on 69
mechanism for adjusting from zero to maximum 92
mechanism for automatically varying length of 83
of a crank 60
of a lever, mechanism which insures complete , 380
Sun-and-planet motion 38
Textile machinery, builder motion X15
differential speed-regulating gearing of 222
mechanism for varying redprocating motion 83
tripping devices or stop motions < « . . 354
3IO THOMSON — WORM-WHEEL
Thomsoa straight-line motion for indicator 15
Throw of an eccentric 63
Togg^ and spring relief mechanism of forging machine 364
Toggle joint x8
Toggle mechanism, of drawing press 7a
single- and double-stroke 71
Trains of mechanisms 50
Trains of spur gears 32
Transmitting motion, general methods of 7
Triple gearing for engine lathes 44
Tripping mechanisms 248
of drilling machines 350
of drop-hammer 257
of electromagnetic type 370
of textile machines 254
of wire winding machine 253
Tripping or relieving mechanisms of forging machines 364
Tumbler gear mechanism for changing speed 48
Two-cyde type of drive for cold header 71
Universal joint or Hooke's coupling xz
Vdodty, angular 5
definition of 4
Velocity ratio S
of Humpage*s gear , 45
IVabUe gear for driving reciprocating part rapidly 85
Water turbine governors, differential 317
Watt stiaight-line or parallel motion 13
Watt sun-and-planet motion 38
Whitworth motion, modification of 127
Whitworth quick-return motion 126
Windlass, differential motion of Chinese 202
Wiper and involute cams z88
Wire winding machine tripping mechanism 353
Worm and rack drive 74
Worm gearing 38
arranged as substitute for floating lever 316
trip for automatically disengaging 349
Worm-wheel, duplex, for varying a transverse movement . • • . • 83